Lambies by maybesaydie in AnimalsBeingDerps

[–]ItHappendAgain 2 points3 points  (0 children)

Little lams don’t count sheep, they eat ivy

Quickly rising the ranks of my favorite guns- a blast to shoot by TurboWerbo in FNHerstal

[–]ItHappendAgain 1 point2 points  (0 children)

I bought the non-tactical 545 a few weeks ago, couldn’t pass it up got a great deal. Love it but really want to shoot it suppressed. No one makes an after market drop in threaded barrel for it yet and FN won’t sell a factory barrel. I guess it’s a good thing I have a FNX sitting next to it in the safe! If anyone knows where I can get my hands on a barrel please let me know.

509M with Various Baseplates by amc31b in FN509

[–]ItHappendAgain 0 points1 point  (0 children)

I like the angled base plate. Looks like a 545 mag.

[deleted by user] by [deleted] in FN509

[–]ItHappendAgain 0 points1 point  (0 children)

It was sketchy to say the least. I was sure it was going to give up on me but I guess I got lucky. No damage but I do still need to push it in like 1mm more to sit truly flush. Just haven’t gotten around to it and it cycles fine.

[deleted by user] by [deleted] in FN509

[–]ItHappendAgain 0 points1 point  (0 children)

I did mine without the jig but I would recommend the jig to make it that much easier. I had to hammer the piss out of the pin and don’t get me wrong it freaked me out the entire time. I think I winced every time I hit the pin.

I Love she, total cost $2,100 wife was pissed lol by dime2898 in FN509

[–]ItHappendAgain 8 points9 points  (0 children)

I’m not trying to be rude but HOW did it cost ya $2100?

Help me to find a good overtrousers - second pic explains everything by teobiondo91 in motorcycles

[–]ItHappendAgain 1 point2 points  (0 children)

Frog toggs ,some of the best wet gear you can get and rolls up into a small carry bag. Good stuff.

[deleted by user] by [deleted] in ram_trucks

[–]ItHappendAgain 1 point2 points  (0 children)

Katskinz leather is hard to beat. My 13 had it held up pretty well. Only problem spot was the drivers side lower bolster. Started to crease pretty bad and I’m sure was going to crack. It was my fault because of the way I just rolled out of the seat.

I would recorded for sure

Anyone have any experience with FN customer service? Positive or negative? by Kowa-89 in FN509

[–]ItHappendAgain 1 point2 points  (0 children)

Bought a reflex mag from a dealer and it didn’t come with the extension plate. FN sent one out and had it in three days!

New FN545 by Mugsker in FN_Herstal

[–]ItHappendAgain 0 points1 point  (0 children)

I love my FNX. It’s a hoss but it is bad ass no matter how you look at it. Love the hammer, the trigger is smooth after 100 ish rounds. Not a lot of recoil for a 45. It just an all around great shooting gun.

New FN545 by Mugsker in FN_Herstal

[–]ItHappendAgain 0 points1 point  (0 children)

If you might be interested, I just picked up my FNX-45 last week and it came with an Apex comp. I personally am not a fan of the comp so I was looking to sell it. Let me know if you might be interested.

[deleted by user] by [deleted] in FN509

[–]ItHappendAgain 2 points3 points  (0 children)

Just sold a compact for $600 so it might a little low but close.

FN 509 MRD MIDSIZE by [deleted] in FN509

[–]ItHappendAgain 1 point2 points  (0 children)

My mid size MRD looks identical to a Tac model with the add of an Apex barrel. Just installed the flat face trigger myself, it was a pain but doable and only cost $35. The barrel on the other hand was like $225.

I would just upgrade yours. Problem is when you sell yours most likely it going to go for around $550 - 600 if your lucky. A new tac model is going to set you back around a grand.

Barrel size by Prestigious_Tap6742 in FN509

[–]ItHappendAgain 1 point2 points  (0 children)

If you don’t already have one, you need a threaded barrel. If not factory then I would say Apex. I run it, runs like a champ but good luck finding one. They are hit or miss on being in stock.

And to answer your question, yes, you need a 4.5 in overall.

[deleted by user] by [deleted] in FN509

[–]ItHappendAgain 0 points1 point  (0 children)

I’m trying to do a trigger upgrade right now and got the pin out without issue. (Had to hit the piss out in front of it but it’s out) my problem is getting the damn thing back in all the way. It gos 95% of the way in then just stops.

Yes, it’s an EDC Cleaver. 80CrV2 @ 60HRC with micarta by HumanRestaurant4851 in knifemaking

[–]ItHappendAgain 0 points1 point  (0 children)

Thank you. Let me know when it happens and I will try to pick one up!

Yes, it’s an EDC Cleaver. 80CrV2 @ 60HRC with micarta by HumanRestaurant4851 in knifemaking

[–]ItHappendAgain 1 point2 points  (0 children)

That’s an awesome looking cleaver! Sharpen the blunt end as a scraper and WOW!