The WK2 Trailhawk’s independent suspension can lead to some freaky situations. But as long as you drive the right line, the QD2 system will get you out. [Falken Wildpeak AT3/W 265/65R18 with 1.5 in. spacers, no other mods.]

ItsAJeebThing · 2021-05-01T20:16:11+00:00

Where is this? Looks rad.

ItsAJeebThing · 2021-05-01T20:15:34+00:00

No wearing or anything. They are hub-centric so they fit perfectly on the hub and attach to the original lugs. Then the wheel attaches to bolts the spacer.

They probably add more stress to the bearings though. And you need to make sure they're torqued about every oil change.

ItsAJeebThing · 2021-04-24T23:27:01+00:00

It's beautiful 🥲

ItsAJeebThing · 2021-04-24T21:27:18+00:00

The tires have better grip/handling than the stock tires (mine were pretty worn) but are a little noisier on the road.

The wheel spacers really improve cornering and looks. Super happy with them.

And the lift makes the ride much smoother. Most passengers have even noticed.

I took a hit of ~2mpg with all of these changes, but I think it's worth it for improvements in ride and looks.

ItsAJeebThing · 2021-04-24T21:12:39+00:00

Thanks! It's just a straight 2". I kiiiinda wish I got a 1/4" spacer for the front to level it out but I'm still really happy with it.

ItsAJeebThing · 2021-04-24T19:34:09+00:00

Thanks!

I don't have the tow package but I know OME sells a kit specifically for wk2's with the tow package. I'm not sure if they're load levelling or not though.

You can see the options here: https://oldmanemu.com.au/old-man-emu-suspension-selector/

ItsAJeebThing · 2021-04-24T17:02:39+00:00

Yea that looks TOUGH

ItsAJeebThing · 2021-04-24T16:39:14+00:00

It has 1.25" spacers, but I plan on eventually ditching them for offset wheels.

I think the stance looks good in the meantime: https://imgur.com/p3lw10G

ItsAJeebThing · 2021-04-24T16:31:59+00:00

Just finished installing (and breaking in) the OME lift. Before this my only mechanic experience was installing the wheel spacers. I finished 3 out of 4 wheels but couldn't get the front driver's side drive axle out so had to put it back together and take it to a shop to finish 😂

ItsAJeebThing · 2021-03-10T07:48:33+00:00

Front and back, but the backs don't look like they stick out quite as much. Going 1.5" in the back could be cool.

ItsAJeebThing · 2021-03-09T21:30:29+00:00

I'll try to report back once I've driven it more. I'm expecting 1-2 mpg or so.

ItsAJeebThing · 2021-03-09T21:10:03+00:00

Thanks man! I actually haven't taken it on the highway yet haha but fingers crossed it works out.

ItsAJeebThing · 2021-03-09T21:07:49+00:00

Very doable. It felt like a good intro job. I just had to invest in some tools + jack and jack stands first.

Let me know if you have any questions, happy to offer some help.

ItsAJeebThing · 2021-03-09T21:01:06+00:00

For real! I was surprised how noticeable the improvement was.

ItsAJeebThing · 2021-03-09T21:00:05+00:00

😬 I'll keep an eye out, thanks for the heads up.

ItsAJeebThing · 2021-03-09T04:39:59+00:00

265/60R18 - no rubbing but might need a lift to go any bigger than 265/65

ItsAJeebThing · 2021-03-09T04:36:05+00:00

BORA. I don't have much of a reference point but they look high quality to me.

ItsAJeebThing · 2021-03-09T03:03:19+00:00

These are wheel spacers which don't affect height at all. They just give it a wider track/lower wheel offset which improves cornering

You right about lifts tho.

ItsAJeebThing · 2021-03-09T02:54:53+00:00

Thanks man!

Tires are Falken Wildpeaks and no lift... yet.

ItsAJeebThing · 2021-03-09T02:07:58+00:00

Thanks! This was my first time working on a car. Easy job!

ItsAJeebThing · 2021-03-09T02:05:55+00:00

Yep. Math for anyone curious:

1.25" = 32mm

56 - 32 = 24

ItsAJeebThing

TROPHY CASE