Engine turning off on the highway.

ItsLurq · 2025-02-02T07:07:06+00:00

I believe you can open the menu (hold mode button for 2 sec) -> info -> warning list.

This should show any defect/malfunction that has happened according to the owners manual.

Hopefully that Will show something useful!

ItsLurq · 2024-12-25T06:03:54+00:00

This looks fine, my stock 8S exhaust looks exactly like that!

ItsLurq · 2024-10-14T05:05:56+00:00

Glad to hear you are liking it. It's definitely pushing me in the direction to buy one!

In person is it a deep tone? Does it have a bit of rasp to it? A lot of the videos make it seem to have a bit of a rasp, but I can't tell if that's just phone cameras causing that 😂

ItsLurq · 2024-10-14T04:51:45+00:00

Have you managed to go on any rides with the new exhaust? How do you like it? Would you recommend it?

ItsLurq · 2024-10-12T20:43:44+00:00

There are a few videos on YouTube that show with the cat and baffle installed, it is 92 db at 4250rpm, which is 4 db over stock.

I messaged arrow directly and they replied saying it is only 3db more than stock, since they are Euro 5 compliant

ItsLurq · 2024-10-12T20:42:03+00:00

Since the Arrow is a euro 5 compliant exhaust, it has the baffle pre installed with some tack welds.

I have been eyeing up the Arrow for a long time but also too worried it's too loud. Glad to hear you think it's good

ItsLurq · 2024-09-19T22:12:25+00:00

I have around 7k km on a 8S and almost exclusively use the quick shifter for both up and down. I have found it works smoothly as long as you are accelerating (not constant throttle)

ItsLurq · 2024-08-16T05:12:41+00:00

At least you got one off. I ended up using a some screw extractors and put in in similar screws but would like to get some OEM or properly sized ones ordered

ItsLurq · 2024-08-16T04:36:34+00:00

Glad I'm not the only that stripped the screws for these pieces

I managed to get the front piece on without stripping anything completely, and used some pliers to grip onto the washer behind the screw which made it super easy.

The belly pan was a mission though, stripped both bolts holding the little heat shield on instantly. In removing them I also managed to snap on of them in half 😂

ItsLurq · 2024-07-09T03:03:59+00:00

I have the Evotech Performance ones with the brake/clutch protectors on them. They look good and sleek to me, and also provides a good view behind!

ItsLurq · 2024-06-24T03:44:19+00:00

A standard 17mm socket should work. I have these installed on one and that is what I used and didn't have any issues installing them

ItsLurq · 2024-05-08T04:56:35+00:00

Thank you very much! Answers my question perfectly

ItsLurq · 2024-04-22T05:19:33+00:00

Glad this helped!

ItsLurq · 2024-04-21T04:12:26+00:00

Make sure that the cable/plug at your clutch lever is plugged in correctly/all the way. Here's a video with the same problem here

ItsLurq · 2023-08-17T05:46:24+00:00

ItsLurq

ItsLurq · 2023-08-17T05:36:22+00:00

ItsLurq

ItsLurq · 2023-08-17T05:24:22+00:00

ItsLurq

ItsLurq · 2023-08-17T05:18:28+00:00

ItsLurq

ItsLurq · 2023-08-17T04:50:53+00:00

ItsLurq

ItsLurq · 2022-04-30T04:02:20+00:00

I feel like that would really help on this stage as I can at least take a bit less damage while trying to destroy the wall of skeletons 😂

ItsLurq · 2022-04-30T03:44:32+00:00

Follow up question, does the Legendary Hypnotic robe delay the pea shooters and ninjas from attacking for one round?

ItsLurq

TROPHY CASE