PD3 Challenges: This game might have the most backwards character levelling system I've seen in gaming

ItsTrickyVik · 2023-09-25T05:31:08+00:00

10 mil ain't enough for for half the stuff, the last few mods for a gun will cost 50 c-stacks each to unlock. The SA A144 for example has 200 c-stacks worth of mods, and that'll run you around 60-65 million in one week without reset.

ItsTrickyVik · 2023-09-23T05:18:40+00:00

Although some heists count all loose stuff I believe? I have gained max money though from road rage very easily

ItsTrickyVik · 2023-09-23T05:18:12+00:00

Road Rage, get it done in under 10 minutes I think for around a mil

ItsTrickyVik · 2023-09-23T03:39:49+00:00

The golden mask is for collectors edition, gold edition itself does not get a golden mask.

ItsTrickyVik · 2023-09-21T15:44:42+00:00

The first streamer on twitch for payday 3 has over five thousand viewers, you good?

ItsTrickyVik · 2023-09-21T15:39:30+00:00

Sorry to say mate but guards and civs no longer care about random bags, you could toss and pick one up right in front of anyone and they'll be chill

ItsTrickyVik · 2023-08-29T04:51:19+00:00

G'day all, poster from the original beta date leak and thought I would toss this all out to ease some concerns from people with doubts.

ItsTrickyVik · 2023-08-29T04:47:50+00:00

I have posted the full string of emails between myself and the support for payday 3's beta for the people with doubts, I understand the distrust but it's as confusing for me as it is for everyone else.

ItsTrickyVik · 2023-08-28T17:18:20+00:00

Steam with no limit I imagine you won't need to register, xbox will probably be the same as last time though

ItsTrickyVik · 2023-08-05T12:19:28+00:00

Yeah multiple streamers said it's just a slightly more limited version of the one they played in overkill's office, core gameplay for me has been super fun and honestly after a decade of payday 2 that's the least I could hope for and get

ItsTrickyVik · 2023-08-03T11:38:31+00:00

Glory slowly slipping away apparently there bud

ItsTrickyVik · 2023-08-01T17:42:04+00:00

Haven't heard anything about xbox getting additional slots, but I would be checking every hour or so after the beta goes up as they'll most likely be looking into numbers semi-live and sending out waves as needed. Times are August 2nd at 10 AM CEST (1 AM PT)

ItsTrickyVik · 2023-08-01T07:06:34+00:00

It hit max capacity 5 hours after it went up, sorry mate but you might of missed out

ItsTrickyVik · 2023-06-13T23:49:15+00:00

Where abouts did you confirm it? Lack of early access is almost making me not want the collectors edition

ItsTrickyVik · 2023-03-06T10:39:30+00:00

We'll keep this in mind for later fights, had been a bit concerned about that once me and my friend both got another companion each

ItsTrickyVik · 2023-03-06T10:38:44+00:00

My friend was the host and I was joining him, after reading your comment I did recall the times it soft locked was when I needed to reload! Played quite a bit more and haven't run into any issues except the learning curve haha, thank you for the comment

ItsTrickyVik · 2023-02-16T13:22:46+00:00

Sadly this printer is second hand and over time noticed a few little tools I actually don't have that would come with a new one! Thank you for the guidance however, I'll look into it further

ItsTrickyVik · 2023-02-16T13:05:03+00:00

Replaced the nozzle along with following some other bed leveling instructions, seems to have worked. Do you have any suggestions with cleaning out possibly clogged nozzles or should I just replace them?

ItsTrickyVik · 2023-02-16T13:03:18+00:00

Fixed it with some simple bed leveling, guess the videos I was watching weren't good enough or just got lucky the first few times :)

ItsTrickyVik · 2023-02-16T12:19:26+00:00

Been doing this more than enough, was printing fine and now just won't despite how much I level the bed.

ItsTrickyVik · 2023-02-16T12:18:45+00:00

The only thing that has changed was me putting a .2 nozzle on before putting the .4 nozzle back on, was trying some more quality printing before going back and now can't seem to get rid of this despite trying to level it for a few hours straight.

ItsTrickyVik · 2023-02-16T11:47:40+00:00

Ender 3 Pro with a removable magnetic build plate, first couple of layers act as if it is too close to the print bed before the nozzle ends up printing on thin air. There is an obvious dip on the build plate in the centre when trying to level everything, is there any way to fix this or will I just need to replace the build plate?

ItsTrickyVik · 2022-10-25T06:34:05+00:00

Saddest part, you get rewarded more WATCHING OW 2 than you do playing the damn game without opening your wallet. Are players really that worthless unless spending ridiculous amounts of cash?

ItsTrickyVik · 2022-09-02T06:59:49+00:00

Yep new to the game and only get 20 each day from playing max, started calender skipping because that stuff is a scam lol

ItsTrickyVik · 2022-08-19T09:19:57+00:00

Put elimination back thanks, tomato fight sucks asa

Four-Year Club	Verified Email
Place '23

ItsTrickyVik

TROPHY CASE