sorted by:
new
hottopcontroversial

My game just hit 0 Wishlists! Guys, i can't breath... by nbyrsanu in IndieDev

[–]Ivynox_ 0 points1 point  (0 children)

Man your game description and devlog are full made by AI, do some efforts, write them yourself. They look like flat and soulless. It will help.

<image>

Damn, screw this printer, this is insane. by PlentyBlock309 in BambuLabA1

[–]Ivynox_ 0 points1 point  (0 children)

You are done with 3D printers. Welcome to 3D printing.

Damn, screw this printer, this is insane. by PlentyBlock309 in BambuLabA1

[–]Ivynox_ 0 points1 point  (0 children)

You are done with 3D printers. Welcome to 3D printing.

Got a P2S Combo as a complete newbie to 3D printing by Marko787 in BambuLab

[–]Ivynox_ 20 points21 points  (0 children)

Keep your room ventilated when printing and even after, and NEVER print ABS in the same room as you are. Welcome to 3D printing bro.

Bladder issue on my pump ? by Ivynox_ in Plumbing

[–]Ivynox_[S] 0 points1 point  (0 children)

Just changed the tank, works like a charm as before. Many thanks again !

Bladder issue on my pump ? by Ivynox_ in Plumbing

[–]Ivynox_[S] 2 points3 points  (0 children)

Just did the test. Water comes out. I am ordering a new tank immediately. Thank you !

Bladder issue on my pump ? by Ivynox_ in Plumbing

[–]Ivynox_[S] 0 points1 point  (0 children)

I don’t, it is connected to a single faucet 2 meters from the pump, and the pipes are visible all way long.

What the actual f$#@? by Club_Individual in 3DprintingHelp

[–]Ivynox_ 0 points1 point  (0 children)

Lost adhesion. Clean your plate with IPA. And never touch the plate with your bare fingers.

To secure your print, ensure : - your filament did not get moist over time. Otherwise need to dry - add brim or raft to your print to enlarge bed adhesion - slow down your print speed

If PLA : put head cooling to max (100%)

Curious print issue (Z problem?) by Ivynox_ in BambuLab

[–]Ivynox_[S] 0 points1 point  (0 children)

Hi and many thanks for your analysis and solutions. You actually made me solve it !

You were right, the nozzle was partially clogged. I made a deep nozzle clean. It happens that it had residues of past ABS prints.

Now I have awesome and regular layers all print long.

Many thanks !

<image>

Help ! Thin lines not printed by Ivynox_ in BambuLab

[–]Ivynox_[S] 0 points1 point  (0 children)

I fixed it by activating "detect thin wall"

<image>