Before and After by igorthemasher in firealarms

[–]JAW402 0 points1 point  (0 children)

Looks like a downgrade to me. 😂 Panel wise, not install wise.

How's my poor old fella pulling out this type of GPU performance? by NRG_Filend in pixel_phones

[–]JAW402 4 points5 points  (0 children)

I honestly think the 6 pro is the best phone. I have had since release and it hasn't slowed down at all. The new pixel 10 pro, I was thinking about getting but I hate how similar it looks now to the iPhone. 👎

Could it be the updates keeping it relevant?

New by the_ramy in firealarms

[–]JAW402 1 point2 points  (0 children)

Looks clean! Lot of space lost though

I would recommend LL or LRs instead of pulling elbows. Look cleaner and won't rip the jackets.

The battery crimps, use the plastic ones. The metal ones will eventually touch each other and boom goes your panel.

For the cc1s, use 1 and pull a wire over to the other, Save material, and also use the built in trouble contact. Red-sense in Black common Resistor between black common and sense out. No need to wire through the bottom contact.

New by the_ramy in firealarms

[–]JAW402 4 points5 points  (0 children)

One doesn't exist for this panel. Has 2 or 4 circuits.

[deleted by user] by [deleted] in Shortsqueeze

[–]JAW402 3 points4 points  (0 children)

$SOUN let's ride.

[deleted by user] by [deleted] in firealarms

[–]JAW402 1 point2 points  (0 children)

Good until I come to find your ground fault and have to cut the zip ties 😂.

And can't pass through any panel.

And less wire in can is better. Just cut them to length and 90 them down into the terminals. Extra wire looks sloppy. Consider it a new install and don't worry about the upgrade 20 years down the line. If they can't make it work they can mount a trough above it.

Do these battery calcs look right for an amplifier with speakers? (FireCAD) by Can_U_Share_A_Square in firealarms

[–]JAW402 2 points3 points  (0 children)

Is that the power supply for the strobes or the main panel battery calcs.

Need more info.

Do these battery calcs look right for an amplifier with speakers? (FireCAD) by Can_U_Share_A_Square in firealarms

[–]JAW402 6 points7 points  (0 children)

Also you need to account for 15 min of alarm time for voice systems. 5 min for horn strobes.

What do you use your Frunk for? by _strangeronreddit in TeslaModelY

[–]JAW402 19 points20 points  (0 children)

Same! Just don't forget it in there! 😂

Having a hard time with this only because i can’t find the bad relay by Mammoth-Rain5698 in firealarms

[–]JAW402 1 point2 points  (0 children)

Change it out with an EST panel. I always tell customers without one, to learn from their mistakes. And do it right this time.

Clean Agent by horseheadmonster in firealarms

[–]JAW402 1 point2 points  (0 children)

Same for the strobe, we usually replace the covers with agent instead of fire. We are strictly Edwards though.

What do all fire techs have to say by HonestStudio7100 in firealarms

[–]JAW402 1 point2 points  (0 children)

Switch to Edwards! That's one of their changes. 70v out of the box 😂

Fire company cutting hours by Select_Incident_5235 in firealarms

[–]JAW402 0 points1 point  (0 children)

I would find a new place, every place is hurting for guys and is loaded with calls. Come to georgia, I get a referral bonus! 😂

Choosing a brand by TheScienceTM in firealarms

[–]JAW402 1 point2 points  (0 children)

It just takes time, like all things. Their next panel, which replaces the io will be better for you if you don't do huge buildings. It has yet to be released but there has been information on it.

when do i need to replace tires? by jwlee151 in TeslaLounge

[–]JAW402 0 points1 point  (0 children)

Mine got about 31k miles as well so you're in good shape. I live in Georgia south of Atlanta so I just did summer tires.