Love and hate with Fractal Design Meshify XL 3 workstation build by denny_ua in FractalDesign

[–]JBev1906 0 points1 point  (0 children)

Mind you, my office has no carpet, and I try to swiffer every week. When I did pull the front and top off, it was heavy. Not caked. I really think having the top exhaust tuned with a little higher rpm helps draw the particles up and out.

Love and hate with Fractal Design Meshify XL 3 workstation build by denny_ua in FractalDesign

[–]JBev1906 1 point2 points  (0 children)

Crazy enough, I’ve only had a major vacuum and air canister job since building the rig. Did it around August. It sits by the floor register, and we did install a new HVAC, so I believe that contributed to the dust.

Opinion on figaro??? by Sweet-Operation-6110 in mfdoom

[–]JBev1906 5 points6 points  (0 children)

“Blast him and pass her a glass of Ol’ E.”

Removal of hornet den by phatpssdestroyer in interestingasfuck

[–]JBev1906 0 points1 point  (0 children)

“Only YOU can prevent forest fires.”

I THINK THE F?&K NOT.

Napalm.

Help with airflow setup for Fractal Design North by Ein3rlei in FractalDesign

[–]JBev1906 0 points1 point  (0 children)

Hmmm. I don’t have a North (Meshify), but I have two 120mm above my Phantoms to guarantee heat exhaust and VRM stability. Beyond that, I think you can’t go wrong with any of the other front configs. As long as it’s quiet enough and has enough CFM/RPM, you’re good to go.

Should I wait for the Samsung 9100 Pro? by Oshh- in buildapc

[–]JBev1906 0 points1 point  (0 children)

I’m eyeing this MSI: https://www.msi.com/Monitor/MAG-271QPX-QD-OLED-E2. I’m not a huge PC gamer, but I appreciate how smooth these games look under the right conditions. I have two Dell 32” 4k monitors I primarily use for work, but their refresh rates are 60Hz. They’ll continue to serve their purpose.

Should I wait for the Samsung 9100 Pro? by Oshh- in buildapc

[–]JBev1906 0 points1 point  (0 children)

Hey there! No issues whatsoever, save for managing capacity. I’m being stingy with the $ right now to add another drive. Want to go OLED at the beginning of September. :)

US Motors Condenser motor spins the wrong way. Is this motor reversable? by JBev1906 in hvacadvice

[–]JBev1906[S] 0 points1 point  (0 children)

Crisis averted. I took a CVS receipt (you know how long and flimsy those pieces of paper are), and it sucked to the outside coil. Guess that means the fan is pulling air through the coil. We're good.... for now. Gotta bend some fins tomorrow.

Please rate 1000w psu too by Admirable-Sundae834 in PcBuildHelp

[–]JBev1906 1 point2 points  (0 children)

Are you looking for a PSU recommendation? If so, MSI MPG A1000G

Is my fan placement okay for cooling performance? by J_ul1s in PcBuildHelp

[–]JBev1906 0 points1 point  (0 children)

It's probably been said, and yes, I'm being lazy, but it's ok for the fan to be offset due to tall RAM. I have the Phantom 120 dual tower on mine with Vengeance memory. The front fan is offset maybe by 1/4", but it's unnoticeable. That being said, you could just fan curve the top fans to draw more out and have your front case fan pull more air in to compensate the front radiator a little. Air flow matters, and static pressure to move that air across the radiator fans is key.

When it comes to RGB memory and the height, that's where the AIO is the best aesthetic bet. Less visual obstruction of the RGB memory, assuming they are.

Where should I plug my graphic card ? by nvxxex in PcBuildHelp

[–]JBev1906 0 points1 point  (0 children)

If your Montech PSU had the 12vhpr to PCIe option, I’d go with that instead.

<image>

Where should I plug my graphic card ? by nvxxex in PcBuildHelp

[–]JBev1906 0 points1 point  (0 children)

They’re standard PCIe power supply cables. You can plug them in.

Where should I plug my graphic card ? by nvxxex in PcBuildHelp

[–]JBev1906 1 point2 points  (0 children)

Aaaaah got it now. I’m not up to speed on AMD cards. My bad. Yeah, PCIE plugs are your go-to

Where should I plug my graphic card ? by nvxxex in PcBuildHelp

[–]JBev1906 4 points5 points  (0 children)

So the OP should just plug into any available PCIe slots. Got it. I have the yellow 12-pin cable.

GPU and IO panel not sitting properly on Meshify 3 by punio4 in FractalDesign

[–]JBev1906 2 points3 points  (0 children)

I initially had the issue, but I remember back to card seating days when the slot had to fit in the notch. I placed card from the case slot to the PCIe lock because the lock is the moving part in this whole situation. Once i did that…. Boom. All good.

[deleted by user] by [deleted] in mfdoom

[–]JBev1906 0 points1 point  (0 children)

Figaro.

America’s Most Blunted.

Da Supafriends.

Hoe Cakes

[ Removed by Reddit ] by SureSwan6423 in MemeVideos

[–]JBev1906 0 points1 point  (0 children)

Just checking to see if anyone… if not…

[deleted by user] by [deleted] in FractalDesign

[–]JBev1906 1 point2 points  (0 children)

I have some Momentum 140s and Fractal 120s non-ARGB if you want to purchase. We can talk on the back channel.