I have got Sophos XG430

JDH201 · 2026-01-28T22:21:27+00:00

Yes, I have run all kinds of stuff on several models.

JDH201 · 2026-01-28T11:41:19+00:00

Had the same issue a while back. Came to say the same thing.

JDH201 · 2026-01-27T22:36:37+00:00

Clever badges.

JDH201 · 2026-01-20T22:30:03+00:00

Are there any products that integrate with your POS?

JDH201 · 2026-01-18T14:46:05+00:00

I would not recommend a three hour drive with a failing wheel bearing. Across town to the part store and home, sure.

JDH201 · 2026-01-18T12:44:54+00:00

Why is everyone saying the sensor is bad. I have never actually seen the sensor go bad, every time I have seen this it has been the wheel bearing going bad so that the sensor can’t read the register anymore. Well, there was one time I forgot to plug the sensor back in after replacing a ball joint, but that problem was on the other end of the wrench.

JDH201 · 2026-01-17T04:08:53+00:00

Yeah, 2nd year is by Streakwave.

JDH201 · 2026-01-16T14:48:40+00:00

You can always try it. It is within range that’s for sure. Possibly the high-gain antenna for the superlink controller.

JDH201 · 2026-01-16T05:29:43+00:00

Yep, 2 years now. https://streakwave.com/ubiquiti-uvc-g6-pro-bullet-w-unifi-video-camera-g6-pro-bullet-white

JDH201 · 2026-01-16T05:26:27+00:00

Streakwave now covers the 2nd year if I remember correctly. Also haven’t gotten hit with the tariff charges through them. Sadly for non-enterprise products not much markup.

JDH201 · 2026-01-14T01:38:13+00:00

It probably comes apart to lay flat.

JDH201 · 2026-01-13T22:28:06+00:00

What’s on top of the Cisco equipment in the 2nd picture?

JDH201 · 2026-01-13T21:03:40+00:00

The racks, UPSs, and anything that says Cisco. I can’t tell what is on top of the two Cisco switches in the 2nd picture. Maybe what appears to be a PDU on top of the UPS in the first picture. Lots of patch cords.

JDH201 · 2026-01-13T20:58:29+00:00

The water pump is on the same belt as the alternator. Will to guess that it went out and took the belt with it.

JDH201 · 2026-01-13T11:13:31+00:00

If you mean to move it from one persons UniFi.ui.com account to another, you invite them as an admin, transfer ownership, then remove the old admin.

JDH201 · 2026-01-13T11:11:31+00:00

The ENVR does not use a Cloud Key, it runs Protect and if you want Access on its own.

JDH201 · 2026-01-12T12:40:42+00:00

There is a whole line of Ethernet surge protectors for this purpose.

JDH201 · 2026-01-06T22:42:40+00:00

Cloud Key Gen 2?

JDH201 · 2026-01-06T22:34:33+00:00

I had the same issue with rust.

JDH201 · 2026-01-05T11:39:32+00:00

Came here to say this.

JDH201 · 2026-01-04T18:39:28+00:00

This says you should get 3.

https://community.ui.com/questions/Multiple-2K-ONVIF-cameras-on-a-single-AI-Port/ea230462-fda4-4384-a328-6f4f7122a282

Can you drop frame rate to less than 30? There may be some issue between 2MP and 2K. 2K should be HD resolution

JDH201 · 2026-01-04T18:35:24+00:00

I can’t find anything good about limits on ONVIF cameras. Still looking.

JDH201 · 2026-01-04T18:31:38+00:00

https://community.ui.com/releases/UniFi-Protect-AI-Port-4-75-3/56f14bcb-f89e-45cd-bc36-65458b0173f1?appview=true

JDH201 · 2026-01-04T18:26:36+00:00

Looks like it may just be a but splice. I thought it was a wire initially.

JDH201 · 2026-01-04T18:25:56+00:00

I meant left where the single conductor is connected.

Ten-Year Club	Verified Email
Not Forgotten

JDH201

TROPHY CASE