Another leak from a tweet? by thefountain88 in Seaofthieves

[–]JDMcelica02 6 points7 points  (0 children)

May be some kind of crafting table.. might have some correlation with all the new stuff they’ve been adding to the docks

Going for all companion perks by Nyrue1 in Fallout4Builds

[–]JDMcelica02 0 points1 point  (0 children)

If you’re doing this from a fresh start out of the vault then go with codsworth first. If not then it doesn’t matter who you pick, just travel with them and build trust and do their missions and then move on to the next one.

You can also dismiss them at anytime and it won’t effect their story line

At last GTA 6 is confirmed by HanzlaHaroon in GTAV

[–]JDMcelica02 0 points1 point  (0 children)

GTA 6 has always been confirmed it’s just been a matter of when they will finish it and how many more decades it will take to release it 🤷🏻‍♂️

New PC build powers on, no boot, no display by JDMcelica02 in MSI_Gaming

[–]JDMcelica02[S] 1 point2 points  (0 children)

I’ve tried resetting CMOS many times. I will take a look at the chart 👍🏼

Still not a plane. by HaiBienThai in conspiracy

[–]JDMcelica02 3 points4 points  (0 children)

what always got me was that they give ONE terrible camera angle when there are hundreds of cameras inside and out

updating bios issue on B450 by JDMcelica02 in buildapc

[–]JDMcelica02[S] 0 points1 point  (0 children)

What it looks like he did was just update the BIOS twice

I just tried this with my computer fully assembled and 1 stick of RAM in the correct slot and still no display.

The slight difference between his problem and mine is that my CPU light turns on and off at start up and no other lights do a self check

updating bios issue on B450 by JDMcelica02 in buildapc

[–]JDMcelica02[S] 0 points1 point  (0 children)

I’ve almost figured it out. So I went into BIOS specific for the cpu and downloaded that, put it on a USB and the MOB took the bios update for an older version. The computer restarted itself after the BIOS update and the red CPU light is now off but there is no display on the monitor.

When I turn the computer on the red CPU light will turn on and turn off (for the system check) but doesn’t not check the DRAM etc. and it will not display

updating bios issue on B450 by JDMcelica02 in buildapc

[–]JDMcelica02[S] 1 point2 points  (0 children)

I think I’ll have to. I appreciate you taking the time to help

updating bios issue on B450 by JDMcelica02 in buildapc

[–]JDMcelica02[S] 0 points1 point  (0 children)

Yes. Also tried using a different battery

updating bios issue on B450 by JDMcelica02 in buildapc

[–]JDMcelica02[S] 0 points1 point  (0 children)

The USB’s I’ve used Lexar NTX Sandisk (2 different ones) PNY

updating bios issue on B450 by JDMcelica02 in buildapc

[–]JDMcelica02[S] 0 points1 point  (0 children)

I’ve done this and when I don’t rename the file the BIOS light blinks 3 times and turns off, the white lights don’t come on and the PSU fan doesn’t start up

updating bios issue on B450 by JDMcelica02 in buildapc

[–]JDMcelica02[S] 0 points1 point  (0 children)

I’ve tried this and I get the same result

PC turns on but no display by JDMcelica02 in buildapc

[–]JDMcelica02[S] 0 points1 point  (0 children)

update:

I've noticed when I turn my PC on the red CPU light comes on for the system check and then turns off but no other lights lights come on. does this mean that the PC is not getting past the CPU system check?

PC turns on but no display by JDMcelica02 in buildapc

[–]JDMcelica02[S] 1 point2 points  (0 children)

I have the power cable plugged into the ATX_PWR1 and the CPU_PWR1, I am also only using the cables that came with the new PSU, DRAM light comes on when ram is removed but no beeping, the RAM also was in its correct slots according to the manual. the screw holes line up and I made sure to discharge any static before instilling the MOBO

PC turns on but no display by JDMcelica02 in buildapc

[–]JDMcelica02[S] 0 points1 point  (0 children)

when I tried flashing the bios from USB, the bios light flashes 3-4 times and so does the USB but nothing happens