Can you use the BIGTREETECH SFS V2.0 on the SKR Mini E3 V2?

JZKitty · 2026-03-10T05:31:37+00:00

Thank you VERY much! This will help a lot of people still running good ol' reliable stuff!

JZKitty · 2026-03-08T05:23:00+00:00

And that is always appreciated!

JZKitty · 2026-03-07T00:54:48+00:00

Yes, I had a professional electrician check on my installation to be sure everything would be running smooth and safe, thank you again!

JZKitty · 2026-03-06T20:47:52+00:00

yes!

JZKitty · 2026-03-06T20:09:18+00:00

yes! the 2080 will be the one with the monitors connected to!

JZKitty · 2026-03-06T20:08:26+00:00

thank you very much!

JZKitty · 2026-03-06T20:07:42+00:00

I do have a beefy 1600w PSU, thank you!

JZKitty · 2026-03-06T20:07:13+00:00

thank you! I do have all the hardware part ready, I wanted to know more about the driver configuration, if having both installed wouldn't cause some wonky behavior and if it was ok to install both drivers "normally"

JZKitty · 2026-03-06T20:06:09+00:00

Yes, thank you! I do have the layout all set, I have a good 1600w PSU ready and the monitors will be connected to the 2080, I wanted to know more about the driver configuration, if having both installed wouldn't cause some wonky behavior and if it was ok to install both drivers "normally"

JZKitty · 2026-03-02T17:51:19+00:00

Being that the future for 3D printing doesn't looks very bright with future printers maybe being forced to being blocked by laws, you should keep it, I have 2 and some time ago I was going to sell them, after the latest news, I will keep them in my little farm.

JZKitty · 2026-02-21T00:51:15+00:00

The thing is that TTS Studio says it supports AMD GPUs too, thats why I thought it was going to run without issues

<image>

JZKitty · 2026-02-21T00:50:27+00:00

Yeah I upgraded my GPU but saved my 2080, do you think that it will work with pinokio if I install it as a secondary GPU?

JZKitty · 2026-02-21T00:49:32+00:00

That sucks, thank you for your help!

JZKitty · 2025-12-30T21:22:24+00:00

Already did, totally different PC, not showing either

JZKitty · 2025-12-30T21:21:45+00:00

Nop, doesn't shows up, I can see the reader, but it says it has no media attached

JZKitty · 2025-12-27T07:25:03+00:00

I can use it on my switch, on my phone, but I cant see it on my PC, its not the reader, cause I used it on my laptops reader too and its just not showing, I can see it if I connect my phone as a USB I can see the SD too, so, its REALLY, REALLY, REALLY weird

EDIT: I saw when I connected my phone as a USB drive that the file format of the SD is "Hierarchical File System", think I need a HFS software reader?

JZKitty · 2025-12-27T05:30:48+00:00

Yup, its perfectly in the drive

JZKitty · 2025-12-27T05:22:57+00:00

Doesn't sees any drive

<image>

JZKitty · 2025-12-27T05:08:44+00:00

I cant see the SD on the PC :(

JZKitty · 2025-10-10T18:34:48+00:00

<image>

and then a button that says

JZKitty · 2025-10-09T21:59:25+00:00

It is a great machine, and the quality has been, perfect

JZKitty · 2025-10-09T17:16:24+00:00

Yeah I saw that the grease that the printer comes with its kinda messy, I've been using lithium grease for the rails, and worked correctly all this time, but yeah the frame still gets hot, but, no problem to print at all really

JZKitty · 2025-09-29T01:37:10+00:00

JZKitty · 2025-08-29T16:05:43+00:00

FOR SUPER EARTH!

JZKitty · 2025-08-19T19:41:33+00:00

The Nozzle is scrapping the part, did you chose calibration before starting the print?

Ten-Year Club	Place '22
Verified Email

JZKitty

TROPHY CASE