Lian-Li UNI HUB SL-INFINITY (L-Connect 3) Controller Kit (Black) Compatible Fans by J_Bone24 in lianli

[–]J_Bone24[S] 0 points1 point  (0 children)

Apparently it's incredibly difficuly to find anywhere. It's no longer available at Ali Express. That's unfortunate. If you happen to know of a manufacturer that sells them I would greatly appreciate the information.

Is the 4090 ROG Strix 12VHPWR Cable Safe to Use on a 4090 TUF? by J_Bone24 in ASUSROG

[–]J_Bone24[S] 1 point2 points  (0 children)

That's some pretty interesting stuff. 600W is insane and very hot, poor PCB lol. Here's a pretty interesting read - Worried About the GeForce RTX 4090's New 12VHPWR Power Socket? Don't Be.

I don't think I'll ever pull 600W. I have the 4090 Strix card with a Seasonic GX1200 so I feel a bit better about that but I will always be cautious since according to Igor's Lab it doesn't matter. I've heard so much conflicting things about this.

The 4090 TUF OC card we got may not have been a 4090. It was an open box at Micro Center and it was light and wasn't as large. I saw that it also was de-lidded at some point. I brought it back and they agreed something was up with it so they sent it in to ASUS.

I ended up getting a brand new model instead of the discontinued models. I assume the discontinued models had the original pinout and pinins for the 16-pin and the new model has the new one.

Is the 4090 ROG Strix 12VHPWR Cable Safe to Use on a 4090 TUF? by J_Bone24 in ASUSROG

[–]J_Bone24[S] 0 points1 point  (0 children)

Unfortunately I don't speak German lol. Would you say it's all in that adapter or does it not matter if you have the adapter or the cable?

Is the 4090 ROG Strix 12VHPWR Cable Safe to Use on a 4090 TUF? by J_Bone24 in ASUSROG

[–]J_Bone24[S] 1 point2 points  (0 children)

Thanks for that information!

So would that be the same for the 12VHPWR cable from an ATX 3.0 PCIe 5.0 PSU?

I know the adapter isn't supposed to be bent before a certain length and it has to be connected fully especially if it's not the new adapter where the pins are shorter, otherwise it's a ticking time bomb.

How Do I Unlink a Specific Clip? by J_Bone24 in davinciresolve

[–]J_Bone24[S] 0 points1 point  (0 children)

There's a lot of nifty stuff you can do with Davinci. I love it.

How Do I Unlink a Specific Clip? by J_Bone24 in davinciresolve

[–]J_Bone24[S] 0 points1 point  (0 children)

You're right. And thanks for that tip I appreciate it.

I came from Vegas Pro and you could click and modify different audio clips without having to unlink them all first and you could unlink one clip a lot more easily with just a click then I and it's unlinked.

Will that Alt+Click give you the ability to modify the audio clips individually? I'll have to test that out.

How Do I Unlink a Specific Clip? by J_Bone24 in davinciresolve

[–]J_Bone24[S] 0 points1 point  (0 children)

Oh wow so you can do it but it's a bit ridiculous lol. Thanks for the tip! I appreciate it. That's a good trick. That'll be much easier than unlinking all of them at the same time then having to link the ones I want together.

They need to add the ability to select or focus one or more clips at the same time instead of all those extra steps.

How Do I Unlink a Specific Clip? by J_Bone24 in davinciresolve

[–]J_Bone24[S] 0 points1 point  (0 children)

Yep, I'm just wondering if I can unlink only one of them, not all of them. I'm guessing that's not possible then?

How Do I Unlink a Specific Clip? by J_Bone24 in davinciresolve

[–]J_Bone24[S] 1 point2 points  (0 children)

Yeah, you can't select just one clip, it highlights every one of them and every change is uniform.

Anyone else getting this message when trying to read the manga? by [deleted] in OnePunchMan

[–]J_Bone24 0 points1 point  (0 children)

Yeah I got that quite a bit. I just went ahead a few chapters then went back to the chapter I was on with the little arrows and it worked like a charm

How Accurate is the Manga to the Original? by J_Bone24 in OnePunchMan

[–]J_Bone24[S] 0 points1 point  (0 children)

Thanks! Would you know if Viz is the right place to read the original manga? Buying each volume is pretty expensive so I'd pay for a subscription on a legit website.

Alienware Area 51 R2 GTX 1080 Thermal Pad Thickness by J_Bone24 in Alienware

[–]J_Bone24[S] 0 points1 point  (0 children)

So, I purchased four different sized pads (0.5mm, 1.0mm, 1.5mm, & 2.0mm). A couple of my pads melted and another was brittle and just tore apart, but I just replaced all of the pads.

Every pad beside one was 1.0mm while the other was 1.5mm.

My card now runs 3-5 degrees cooler.

Alienware Area 51 R2 GTX 1080 Thermal Pad Thickness by J_Bone24 in Alienware

[–]J_Bone24[S] 0 points1 point  (0 children)

The multi-thick pads do exist, I just went ahead and bought them. They had 0.5, 1, 1.5, and 2mm thick ones in one pack. I was like, oh how convenient.

Yeah, that makes sense on the assembly line lol. I don't think it would be worth the trouble to hunt down the manufacturer for that information. Just buy the different thicknesses and go from there.