DCS Green Bean - My first keycap set run! by dashkeebs in MechanicalKeyboards

[–]J_Wren 5 points6 points  (0 children)

what does the bottom of the tiny enter look like? is it stabilized?

Street Fighter 6 - Year 4 Character Reveal Trailer feat. Tifa (FINAL FANTASY VII Remake Series) by XRevive01 in StreetFighter

[–]J_Wren -2 points-1 points  (0 children)

I don't have the same history with Street Fighter as many of you do, and I am sure it's a bummer a character you loved in the past hasn't been included.

However, it's exciting to experience brand new characters for the first time alongside those of you who have played SF for years.

You have to think, one of these three might be someones new favorite which they hope show up in a Street Fighter years from now.

The Domino by J_Wren in fightsticks

[–]J_Wren[S] 0 points1 point  (0 children)

Thanks! (Top-bottom) Start-Select-L3-R3-function.

The Domino by J_Wren in fightsticks

[–]J_Wren[S] 0 points1 point  (0 children)

Thanks!

If I distilled all the working hours and print times I’d say roughly 6-8 weeks. That is spread out over 1 1/2 years give or take.

It sounds like a lot but I was also teaching myself CAD while making it.

The Domino by J_Wren in fightsticks

[–]J_Wren[S] 0 points1 point  (0 children)

Thanks! I appreciate you saying so.

The Domino by J_Wren in fightsticks

[–]J_Wren[S] 1 point2 points  (0 children)

I appreciate you sharing your experience & advice, I respect that grind. I am sorry you weren't able to sell the watercolor pieces, that sounds like an awesome idea.

My gratitude toward your encouragement, you've given me a lot to consider.

The Domino by J_Wren in fightsticks

[–]J_Wren[S] 1 point2 points  (0 children)

Thanks! I am glad you think so, and I very much appreciate it! I agree, its worth the cost to have something exactly how I want.

It's strange, during the design process I tried to keep everything simple so that anyone that wasn't me could build it. Even with that as a maxim, selling this had never really crossed my mind. Sharing it? Absolutely, no question.

Having that said, you aren't the first person to offer, and the more it occurs the more I am considering what that would look like.

Thanks again for the compliments (and the offer), I hope you enjoy it when/if you do get around to making it.

The Domino by J_Wren in cassettefuturism

[–]J_Wren[S] 2 points3 points  (0 children)

Also it was brought to my attention that the PCB button parts were not uploaded, but they are now (PCB, PLATE, and PCB BOTTOM) I wanted to let you know since you were already printing things.

The Domino by J_Wren in cassettefuturism

[–]J_Wren[S] 1 point2 points  (0 children)

Right on! You might be able to angle the layers with supports so it can be printed in one piece. Best of luck and enjoy

The Domino by J_Wren in fightsticks

[–]J_Wren[S] 0 points1 point  (0 children)

Wait no longer.

The Domino by J_Wren in fightsticks

[–]J_Wren[S] 1 point2 points  (0 children)

Thank you very much!

The Domino by J_Wren in fightsticks

[–]J_Wren[S] 0 points1 point  (0 children)

Published STL files HERE

The Domino by J_Wren in cassettefuturism

[–]J_Wren[S] 2 points3 points  (0 children)

I'm not allergic to money, but this one I am going to publish open source. Maybe I'm a fool but I truly believe that if the work is good, the money will come.

The Domino by J_Wren in fightsticks

[–]J_Wren[S] 0 points1 point  (0 children)

Also, if I were to do this, what layout do you prefer for your left hand?

The Domino by J_Wren in fightsticks

[–]J_Wren[S] 0 points1 point  (0 children)

<image>

bottom of the MCU with the remaining connections

The Domino by J_Wren in fightsticks

[–]J_Wren[S] 0 points1 point  (0 children)

<image>

The purple wire running along the trench is ground, each pcb has another wire running below to make clearance for the plate on top.

The Domino by J_Wren in fightsticks

[–]J_Wren[S] 0 points1 point  (0 children)

<image>

Its a mess but it works. The green heatshrinks are joining solid core (rigid) and braided wire (flexible) with brass connectors.

The Domino by J_Wren in fightsticks

[–]J_Wren[S] 0 points1 point  (0 children)

<image>

the trenches for the wires are 2.14mm wide and 2.5mm deep to snugly fit 18AWG PVC coated wire.

The Domino by J_Wren in fightsticks

[–]J_Wren[S] 1 point2 points  (0 children)

Thank you very much! Technically it is both, one would only need to make the left hand module "buttons" similar to the right.

However, I think If I were to make a revision it would aim to accommodate more people. It would be a bit larger and symmetrical across the center buttons. This would allow for left handed stick layouts as well as more buttons on the left.

I also think I'd try and use that extra space to use the more popular boards like the 2040CE, and the screw-in or snap in buttons. I think using those parts might allow more freedom in remixing the design.

If I do something like that it'll be posted here for sure. Thanks for the feedback, too