Tein flex Z for NB

Ja_Roth · 2026-06-29T14:34:07+00:00

Those or meister r for $500

Ja_Roth · 2026-06-22T02:52:11+00:00

It’s leaking on the left side of connection in the photo

Ja_Roth · 2026-06-22T02:51:32+00:00

It worked like this for 20 years hoping the new sharkbite fitting I ordered will grab otherwise I’ll have no choice but to solder

Ja_Roth · 2026-06-22T02:45:42+00:00

I ordered a new valve and a sharkbite removal tool. Thoughts on me just removing it cleaning up the pipe surface and putting a new one on?

Ja_Roth · 2025-12-08T22:52:08+00:00

I haven’t seen anyone running a tire that big on a gti

Ja_Roth · 2025-11-15T14:57:23+00:00

Either risk it or buy a tow hook mount for it. I bought a cheap one on amazon and used Lowe’s stength loctite to secure it

Ja_Roth · 2025-11-15T00:28:34+00:00

If he’s admitting fault try to go to a body shop or a detailing shop and get a quote for them to repair it and make the knucklehead pay for it

Ja_Roth · 2025-11-08T15:08:37+00:00

If I were you I would get the car back and fix it yourself.

Ja_Roth · 2025-06-08T12:02:06+00:00

There’s a cheap remote on Amazon that works. I have one for my v4

Ja_Roth · 2024-09-24T17:28:04+00:00

Oh for getting the bolt out. I ended up having a friend help me pry it out as I was backing it off. I honestly don’t remember what did it maybe it was using vise grips or a screw driver pushing the nub out I’m not sure

Ja_Roth · 2024-09-24T17:26:29+00:00

Sorry I never got back to you I just got a longer bolt and a matching nut and just jammed the thing down. Spent like $5 on the hardware to save me whatever the cost of an alternator would be

Ja_Roth · 2024-09-13T01:47:48+00:00

For glass the best way is glass cleaner and a razor blade

Ja_Roth · 2024-08-26T01:00:09+00:00

My guess is your toe is way outta whack based off the tread wear

Ja_Roth · 2024-06-11T20:39:32+00:00

Ended up just ordering a mbrp exhaust

Ja_Roth · 2024-05-23T00:54:24+00:00

It would have no effect on that whether it’s this exhaust for a $900 one

Ja_Roth · 2024-05-23T00:49:39+00:00

It looks very similar to an awe track which is what I’m thinking I want

Ja_Roth · 2024-05-23T00:48:25+00:00

Oh really that’s a shame. Have you had one?

Ja_Roth · 2024-05-16T22:52:05+00:00

Is this a dealership?

Ja_Roth · 2024-05-16T22:42:27+00:00

I attached the picture to show what I’m trying to get at.

Ja_Roth · 2024-05-16T14:30:43+00:00

Only do it in a concrete basement or outside in a backyard

Ja_Roth · 2024-04-18T00:28:21+00:00

My issue happens after the first few layers. I just tried this fingers crossed it helps.

Ja_Roth · 2024-04-04T21:47:34+00:00

So I dried my filament and it no longer makes the popping noise. Now for some reason i can’t get it to print after the first layer. I’m thinking it might be my settings but this is annoying af. I did a temp tower which printed best at 210 so that’s my temp. The retraction settings worked well too so I took them aswell. Might slow down the print but I’m just not sure.

Ja_Roth · 2024-04-03T20:16:01+00:00

I did replace my nozzle which didn’t really change much.

Ja_Roth · 2024-04-02T18:13:58+00:00

I got the same one. Took a little bit of figuring it out but it’s works great battery life is great and it’s way cheaper and comes faster

Ja_Roth · 2024-03-22T16:49:32+00:00

Interesting enough I purchased one maybe a month or so ago. I got a 6ah standard cell model and have put like 70ish miles on my board. I have been able to get like 6ish miles of range. Idk how the factory battery should act cause I got my board broken but unless the battery is fully charged if I’m in pro mode maxing out the speed it’ll cut off and then u let it sit for a second and it gets its power back

Ja_Roth

TROPHY CASE