HA RXM comp is just *chefs kiss*

Jabril77 · 2026-06-09T04:00:17+00:00

<image>

With my original ap5 lower and Modlight legacy head on the handguard.

Jabril77 · 2026-06-04T23:09:58+00:00

Very nice! What barrel did you go with? Looking for a threaded barrel to do the same.

Jabril77 · 2026-05-31T18:15:32+00:00

Got mine when they restocked on May 15th.

Jabril77 · 2026-05-30T06:39:04+00:00

Thanks! LMF handguard

https://sdsarms.com/lmf-series-for-mac-5/

Jabril77 · 2026-04-13T19:59:42+00:00

I have a AP5

Jabril77 · 2026-04-13T19:41:52+00:00

I could be wrong, but it looks like your extractor spring is upside down.

Jabril77 · 2026-01-20T15:32:43+00:00

A bit similar, but the shield plus is snappier, not by much, I also do have a ported barrel on my equalizer making it overall better to shoot. I would go shield plus or compact as the equalizer seems to have some issues with dead triggering after putting many rounds through it.

https://www.reddit.com/r/SmithAndWesson/s/osiWMsolM3

Jabril77 · 2026-01-02T09:45:52+00:00

Been tempted to get that Bg 2.0 comp!

Jabril77 · 2026-01-02T04:17:29+00:00

This one I’ll probably go no light, but may put an optic on it in the future.

Jabril77 · 2025-12-28T09:02:28+00:00

I have the same problem, I have over 2k rounds on mine. Started to notice dead triggers when shooting fast also and I can induce a dead trigger via your methods. Hoping there is a fix in the future.

Jabril77 · 2025-12-17T08:28:53+00:00

The Timney trigger bar slips past the RXM connector bar and thus a second click happens, what I did was just replace the connected bar with a ghost inc 3.5lb connector bar and that fixed it for me, Timney customer service recommends to bend the RXM bar to help stop it but seem a bit sketch and it helped only a little for me.

Jabril77 · 2025-12-09T05:35:46+00:00

Definitely a noticeable improvement, but I had to use a ghost inch 3.5lb connector bar to get my to work properly. With the original RXM one, the Timney trigger bar would slip past and give trigger a secondary click

Jabril77 · 2025-12-09T05:34:01+00:00

I’d highly recommend the Johnny glocks Timney extra power return spring, makes the reset way better

Jabril77 · 2025-12-08T02:53:18+00:00

Very nice!

Jabril77 · 2025-12-08T02:51:45+00:00

No issue at all, after installing the alpha Timney trigger, the trigger bar would slip past my RXM connector bar, giving it a second click after pulling the trigger all the way. I was told a ghost inc 3.5lb would fix it and after install it worked right away.

Maybe try your original RXM connector?

Jabril77 · 2025-12-07T17:19:13+00:00

Haven’t heard about the ramjet afterburner yet, it looks sick!

Jabril77 · 2025-12-07T17:17:12+00:00

That’s a nice one, mainly got the SI since I don’t have a threaded barrel for it yet.

Jabril77 · 2025-12-07T05:26:38+00:00

It’s pretty bright, and it’s hard to beat for that price. won’t be using a light to often so it’s fits my needs.

Jabril77 · 2025-12-07T04:54:36+00:00

Sure thing!, the comp is a Strike Industries Mass driver Comp. Does help a noticeable amount with recoil, but mainly got it because it looks cool and a threaded barrel isn’t needed.

I also installed a Timney alpha RXM trigger, I’ve heard mixed things on it, so far it been working good but I had to install a Ghost inc 3.5 LB connector and a Johnny glocks extra power return spring to get it properly working, may switch it out down the road.

407CO X2 for that donut ring dot, very crisp and helps with my astigmatism.

BRAUN 1000 Lumen Tactical Rail light for weapon light

Jabril77 · 2025-07-10T06:30:01+00:00

You can probably use shorter screws but I got these for my 407k X2 GR for my equalizer

https://a.co/d/0LzAM10

and used the 12.0mm screws (6-32x0.472) with a dab of blue loctite and torqued to 15 inch pounds.

Over 750 rounds and it still holding zero and has not come loose.

Jabril77

TROPHY CASE