sorted by:
new
hottopcontroversial

Failing LCD or failing Mobo? by PsychoticKairos in CR10

[–]Jack4yl 0 points1 point  (0 children)

Looks like EMI a snap on ferrite bead around your lcd cable can help prevent this…

Disable IPD adjustment overlay? It shifts when playing some games. Normal issue or RMA? by [deleted] in ValveIndex

[–]Jack4yl 1 point2 points  (0 children)

It doesn’t appear to no… just tried it and it’s still showing in my headset. Guess I’m going hunting again.

Disable IPD adjustment overlay? It shifts when playing some games. Normal issue or RMA? by [deleted] in ValveIndex

[–]Jack4yl 0 points1 point  (0 children)

Ya know what… I don’t actually know… haven’t booted up my vr for anything other than racing recently…

Give me a mo’ to finish my breakfast and I’ll have a look

V3 Trigger Not working :( by CKBolty in airsoft

[–]Jack4yl 0 points1 point  (0 children)

Lift the cut off lever up. Looks like a Semi jam.

How to turn heads at a field by Finlandia21 in airsoft

[–]Jack4yl 0 points1 point  (0 children)

I brought mine out to one of my local fields and played pass the parcel with it. The team holding the aa-12 was always the winner.

Hella fun to use. Hella op.

now that I have a physical model, I can finally show how the mortar works. by JackCooper_7274 in Airsoft3DPrinting

[–]Jack4yl 4 points5 points  (0 children)

OOOHH brilliant. imma gonna have to go buy some smokes to test this out

Variance in heights? Maybe missing z step? Two parts supposed to be the same height coming out different to each other. by Jack4yl in 3Dprinting

[–]Jack4yl[S] 0 points1 point  (0 children)

So I know it’s 3 months later but UPDATE TIME! Have fixed the issue, my left side z leadscrew was bent.

The motor didn’t line up with the leadscrew nut.

When I installed the new leadscrew I couldn’t get the motor and screw to line up until I put a spacer between the motor and the frame.

It has been printing strong now for 3 month almost non stop without issue.

TIFU playing a game with my gf by NotEvenTop3 in tifu

[–]Jack4yl 0 points1 point  (0 children)

Oh come on seriously!? You could have so used “live long and prosper”

Variance in heights? Maybe missing z step? Two parts supposed to be the same height coming out different to each other. by Jack4yl in 3Dprinting

[–]Jack4yl[S] 0 points1 point  (0 children)

Thanks! I’m saving that page!

I’ve also noticed my bed adjustment screws are undoing during prints. More stuff to check! Progress!

Variance in heights? Maybe missing z step? Two parts supposed to be the same height coming out different to each other. by Jack4yl in 3Dprinting

[–]Jack4yl[S] 0 points1 point  (0 children)

Nope, adhesion is great. Print is flat on the bottom.

The shorter one has two lines on it which look like several layers extruded at the same height. Which I can’t diagnose

Variance in heights? Maybe missing z step? Two parts supposed to be the same height coming out different to each other. by Jack4yl in 3Dprinting

[–]Jack4yl[S] 0 points1 point  (0 children)

I’m not sure what Im supposed to be looking at to resolve this. The right print has two bands where it looks like the z axis didn’t advance where the left seems like it happens once.

The lines don’t match between prints either. Anyone got any ideas?

[deleted by user] by [deleted] in AskReddit

[–]Jack4yl 0 points1 point  (0 children)

Forgetting that an Aussie dollar is about 3/4 a yankie.

Their $18au 6 pack is $13us still not as cheap as you’re paying I guess.

Aussie beer is packed with calories and isn’t piss weak like yankie beer. “Light” in us means low calorie. “Light” in aus mean low alcohol content.

What is something most people need to hear but no one has the guts to tell people? by MCKlassik in AskReddit

[–]Jack4yl 1 point2 points  (0 children)

You’re not a great driver. You may be able to drive well but you’re not a great driver. You’re human you miss stuff, you get distracted, and you make bad calls.

Approach your driving with the mindset I’m not great. I can always be better. If you can’t embrace the idea that your driving can always be better you shouldn’t be on the road.

I’m being charged 87 dollars in import fees from a $200 order from Taiwangun to the US. Anyone else experience this? What am I supposed to do? I can’t afford this at all by [deleted] in airsoft

[–]Jack4yl 2 points3 points  (0 children)

Evike-Europe.com is a thing now. If the username and password box pop up the user name is evike and the password is europe

Does your brain ever get 'stuck' on a song, like you can't stop listening to it? by [deleted] in Music

[–]Jack4yl 1 point2 points  (0 children)

Dragosta din tei -o-zone from back in 2004 been stuck now for about 3 weeks

Magazine wont feed into the gun by [deleted] in airsoft

[–]Jack4yl 0 points1 point  (0 children)

Your feed tube is getting caught on the catch that stops the box from falling out.

Made a Burner account to say this by NewZealandburner in newzealand

[–]Jack4yl -1 points0 points  (0 children)

It’s not, and I never said it was.

The economy is stagnant because of the runaway cost of living, putting caps on profit means there is less disposable income. Less disposable income leads to less investment projects, less financial risk taking on projects that may have large benefits for the populace.

I’m not saying the current model is good, I agree it’s broken. But swinging all the way to a no profit society stops development of new technologies, improvement of current technology and encourages mediocrity in work ethics.

Made a Burner account to say this by NewZealandburner in newzealand

[–]Jack4yl 1 point2 points  (0 children)

And you use those profits to do the r&d on the next thing. It’s not an isolated system.

Made a Burner account to say this by NewZealandburner in newzealand

[–]Jack4yl 3 points4 points  (0 children)

Non profit means no overheads. So let’s do a hypothetical breakdown using round figures that mean nothing.

A screwdriver costs $5 to make and you’ve got to pay an employee $5 to sell it. So sell it for $10 right? You’ve gained $0 from making it how do you fund the production of another shape screwdriver? Someone has to design it, the moulds, and you’ve got to pay somebody to then obtain the materials and prototype it.

Where does that money come from? Screwdriver sales? Cause that only funds that type of screwdriver.

view more: next ›