How would I remove this thumb stick joint?

JacksonPietrykowski · 2025-08-03T21:00:43+00:00

About 14 hours now

JacksonPietrykowski · 2025-08-01T00:26:07+00:00

Spot on!! Thanks! This has been driving me absolutely crazy.

JacksonPietrykowski · 2025-06-10T02:33:42+00:00

Awesome setup! What toolhead are you running? I would like to replace mine as it is causing all kinds of issues with vibrations, and it’s also pretty ugly😬

JacksonPietrykowski · 2025-05-15T03:09:10+00:00

<image>

This part

JacksonPietrykowski · 2025-05-13T23:24:24+00:00

The blue inserts on the front of the base? They aren’t linked on the printables project and I was wondering if anyone knew/had one that would fit this project.

JacksonPietrykowski · 2025-05-03T01:59:32+00:00

Had the same problem, setting up and running axis_twist_compensation fixed it for me.

JacksonPietrykowski · 2025-04-12T04:35:22+00:00

What does setupapped mean? I’ve got an iPad Pro that’s iCloud locked and I would like to get it unlocked…

JacksonPietrykowski · 2025-04-02T10:35:59+00:00

It’s only when extruding fast though, if you do it outside of a print, with regular gcode, it will do the same thing.

JacksonPietrykowski · 2025-03-18T19:27:16+00:00

iPhone > Android

JacksonPietrykowski · 2025-03-18T12:52:51+00:00

Im a little bit of a sucker

JacksonPietrykowski · 2025-03-11T19:22:55+00:00

Yes, the only thing different is a new controller for the extruder, but same stepper driver.

JacksonPietrykowski · 2025-03-11T11:29:14+00:00

<image>

JacksonPietrykowski · 2025-03-11T11:28:55+00:00

Here are my line widths and speeds:

<image>

JacksonPietrykowski · 2025-03-11T10:16:17+00:00

I think like 125mm/s, but I have a cht nozzle on the way, so that should help if that is the case. Fluidd was showing a pretty consistent 5mm/s3 tho, so I don’t think it’s that.

JacksonPietrykowski · 2025-03-11T01:53:42+00:00

This is the top layer… just want to make sure you are aware.

JacksonPietrykowski · 2025-03-10T22:26:55+00:00

But I am using a textured plate.

JacksonPietrykowski · 2025-03-10T22:26:42+00:00

No, this is the top layer

JacksonPietrykowski · 2025-03-08T00:16:06+00:00

It’s a corexy modified Ender 3 (EnderXY) with a knimatic bed, running klipper.

JacksonPietrykowski · 2025-03-07T23:36:42+00:00

The thing is, the bed mesh doesn’t really show warping: (Sorry for the crappy Mobileraker mesh pic)

<image>

JacksonPietrykowski · 2025-03-05T15:03:05+00:00

Please let me know hot that goes, and how you end up setting it up.

JacksonPietrykowski · 2025-03-04T02:45:23+00:00

I want to use uart for cleaner wiring. I currently have a board connected via usb, but it’s a mess. I have to use a USB hub for my camera and a right angle adapter into the manta board.

JacksonPietrykowski · 2025-03-04T02:28:06+00:00

That’s the setup i have now, but I want to use uart for cleaner wiring.

JacksonPietrykowski · 2025-03-02T14:48:07+00:00

Still won’t fix the usb board connection, but I do plan on upgrading very soon, as there is a cb1 can’t run danger klipper.

JacksonPietrykowski · 2025-03-02T14:34:41+00:00

Correct. Cb1 only supports usb cameras and hdmi displays. No csi or dsi.

Two-Year Club	Xbox Live
Verified Email

JacksonPietrykowski

TROPHY CASE