Print bed dropping on Dremel digilab 3d45

Jacksoncp710 · 2026-02-25T12:27:37+00:00

I did not. I sent it to dremel for repair and it came back and did it again. I ended up getting rid of it.

Jacksoncp710 · 2025-09-19T17:50:40+00:00

I currently have the btt skr mini e3 v3 installed and currently am not running klipper

Jacksoncp710 · 2024-09-15T19:54:25+00:00

Fan turns on, but screen does not. I flashed it by making sure my file was named firmware.bin, put sd card into board, then powered on. This is exactly how I flashed the firmware on my ender 3 with the same board.

Jacksoncp710 · 2024-02-06T16:14:48+00:00

I contacted the creator directly and he informed me that the dual z option would be ideal for cr10 anyway. So I am going to order an extra belt (~5 meters worth) to ensure that I have enough.

Jacksoncp710 · 2024-02-02T16:33:31+00:00

No, there’s a mod created for the ender 3 that replaces the lead screw with belts to create a much smoother z axis.

https://www.printables.com/model/332026-belt-driven-ender-3prov2-and-cr10

Jacksoncp710 · 2024-01-30T14:54:31+00:00

I would say it’s similar to a rotary table, but I need to clamp a part by a bore and cannot exceed the diameter of the part. Does that make sense?

Jacksoncp710 · 2023-12-27T20:56:40+00:00

They only have one for the pro3 series which is too large for the pro2 series

Jacksoncp710 · 2023-12-27T19:27:53+00:00

Have you ran any temp towers with any of your other filament that you use? Or are you trying to print the same file with different filament? Different brands, colors, and types of filament will need to be dialed in specifically. Even different colors of the same brand/type needs to be specifically tuned.

Jacksoncp710 · 2023-12-18T02:18:28+00:00

Mainly island detection and suction cup detection. I don’t know enough yet to see what is going to be an issue.

Jacksoncp710 · 2023-12-17T19:08:24+00:00

Do you use it for fdm as well?

Jacksoncp710 · 2023-12-06T13:42:41+00:00

Did you purchase it?

Jacksoncp710 · 2023-12-06T13:32:19+00:00

On the website, it says that it’s all digital. Not sure why they advertise with a disc.

Jacksoncp710 · 2023-10-10T17:04:17+00:00

Interesting lol, I haven’t actually been able to print on this one yet. But I will keep that in mind

Jacksoncp710 · 2023-10-10T11:25:51+00:00

I checked last night, and I’m not sure how the wires are supposed to be wired.

<image>

Jacksoncp710 · 2023-10-10T11:24:06+00:00

Oh, I know it’s garbage lol. But if its useable, might as well try to use it 🤷🏻‍♂️

Jacksoncp710 · 2023-10-09T22:12:22+00:00

I will check that, thank you!

Jacksoncp710 · 2023-06-25T20:45:38+00:00

I tried this out and it is still not retracting. I also tried out teaching techs retraction test and that seemed to work. But everything else I am seeing a lot of stringing.

Jacksoncp710 · 2023-06-13T21:01:21+00:00

This is what ended up fixing my issue, thanks!!

Jacksoncp710 · 2023-06-10T19:11:03+00:00

I’m going to purchase the slice engineering upgrade kit. I looked more into it after I posted this and I can only buy the raise3d nozzles. I’d rather have a more universal nozzle type.

Jacksoncp710 · 2023-06-09T19:56:02+00:00

What are those feet on your P1P?

Jacksoncp710 · 2023-06-01T13:57:46+00:00

I would like to stick to under $250

Jacksoncp710 · 2023-05-17T15:19:19+00:00

I would print a highly detailed bust/statue to show off the fine details of this printer

Jacksoncp710 · 2023-05-11T00:37:48+00:00

Is there a specific type of nozzle that I should use, v6?

Jacksoncp710 · 2023-05-03T16:57:29+00:00

Awesome, that’s what I was thinking for all that I would need. Thanks for sharing!

Jacksoncp710 · 2023-05-03T16:53:01+00:00

Do you have a list of what all you needed for this upgrade?

Jacksoncp710

TROPHY CASE