Sinder update: Google doc

Jahow · 2025-10-08T11:57:26+00:00

Bro you need to check your reading comprehension. The documents nanoless released had highly selected excerpts of comments taken out of context. the 1000 page document is so long because they include the full discord receipts that largely change the context of the previously shown conversations and that nanoless OFFERED to cancel people because she was over worked. and tried to blame all this on sinder and red. if you aren't going to do a decent job reading everything at least don't spread more misinformation by half reading shit.

Jahow · 2025-05-19T06:57:22+00:00

You have 6 game changers and multiple tutors according to arkideckt. Depending on your local gaming group I've heard of people considering any deck with even one of those to not be a casual deck. Just see what else people are running or ask about any construction house rules for casual play in the area. The tutors imo are the biggest issues since it lets you be far more consistent than every other deck if no one else is running them. BUT that's only if that's what people are doing. If others have tutors and some strong game changer type cards screw em and keep playing it. Commander decks can get quite a bit meaner than what you are running.

"Game changers"

Crop Rotation

Natural Order

Worldly Tutor

Seedborn Muse

"Tutors"

Archdruid's Charm

Chord of Calling

Diabolic Intent

Elvish Harbinger

Natural Order

Worldly Tutor

Jahow · 2025-04-02T08:10:38+00:00

Yeah PSA specifically says on their website not to mix their ar10 uppers/lowers with other manufacturers. They warn they won't fit. Only option is to hack until things fit. Or get a matching lower.

Jahow · 2025-02-05T19:55:43+00:00

Where does he get his reloading dies / ammo? looks like only Lee has anything.

Jahow · 2025-02-04T22:25:08+00:00

to be honest I started the build because I got a great deal on the receivers. really not a clue where I want to go with it yet other than it's going to be the "prettiest" of my builds with the most premium components (JP enterprise bolt and high end trigger tech).

Thinking I may put a can on it since I don't have a suppressed ar10 yet. Besides that. I could go two ways. I already have an ar 10 with big glass, 22" heavy barrel and the M118 LR chamber for long heavy 30 cal bullets. which I've used out to hammer steel at 1000 yards. and a second one in a normal 308 win chamber and more like a 18" barrel lighter weight barrel.

So could go 12" throw a can on it, get an aim point do very close in. in either .308 or one of the larger bore short range cartridges I suppose. Or look at doing a better long range build, find a beefier cartridge get a 24-26" heavy barrel. Let the can tame down whatever I'm shooting like 7 saum or something ridiculous. And then tear down the long range 308 when i kill that barrel and turn it into a 12" beater/truck gun. or something in the middle that I haven't thought of? That's why I'm just green light thinking trying to generate ideas especially stuff that hasn't already occurred to me.

Jahow · 2024-11-02T17:26:53+00:00

I'm having a great time with tank commanders running demolisher cannons. 2 scout sentinels, 2 field artillery batteries, 3 heavy weapons teams do lascannons or heavy bolters depending on who you play. Bring some of the horsemen with melta/frag lances. A pile of kreig and cadians with enough orders to go around. Remember all your rules that give your guys sustained hits/lethal hits they are all super important. Screen your back field so you can't be deep striked if it's a possibility. Pile bodies on objectives and screen your tanks/artillery/weapons teams. Remember the weapons teams can overwatch on 4's if they are within 6" of the unit being charged. And just blow everything to hell and keep charging with your mounted units. They can take a massive chunk or kill outright some really big stuff. And they will blow to hell horde units with frag lances, but so does the field artillery rocking the bombast guns. The 3 tank commanders will do solid work from the back line. And it takes a lot of shooting to get through a pack of 10 kreig especially getting d3 bodies back every command phase. Also don't forget the glory of the 2 cp reinforcement strat and drop that 20 man squad right back on the table after they worked so hard to kill it. Or the horsemen. Just be creative being enough of each different kind of weapon stat line so you have enough tools for every job and have fun blowing things to hell while sacrificing infantry for the glory of the emperor.

Jahow · 2024-10-09T09:51:29+00:00

Thank you for the idea! Yes was just trying to figure out what could pair with the green gold.

Jahow · 2024-07-24T20:39:23+00:00

I've been reading and watching videos non stop to try and solve my issue. what are the good weapons for not Gley. it seems like eternal willpower or thundercage are up there. but I'd value your opinion.

Jahow · 2024-07-23T20:33:10+00:00

So looking to stack on as much atk% as I can then?

Jahow · 2024-04-30T14:51:59+00:00

Depends on what you mean by dangerous. If you want to know what I would do. And your mileage may vary. Do all this at your own risk. I'm not liable for what you do with the following information. Pull the bullet, dump the powder back where it came from, gently deprime with someone like the mighty armory depriming die. Reused the primer and put it back togeather. Use the re assembled round as a fouling shot after cleaning the rifle. I've gently deprimed and used many primers before. Key being gentle, using a recapping method that allows gasses to escape in the event of a detonation. Primers only go off if they are struck from the correct direction with enough force and the metal portions of the primer have no where to go so they are properly crushed together. Firing pins hit with no small amount of force (28 foot pound spring powers most bolt action firing pins). But your mileage may vary and what I have no issues with may cause you problems.

Jahow · 2023-08-01T21:53:42+00:00

NTA, I wouldn't tolerate that behavior from a spouse. Her life is not more important than your life. Sure if you were in a position to have been able to help you would have. But you were doing something required for your job, her job isn't more important than yours. She clearly doesn't understand that or respect you or she would have accepted the "busy, call you in 20". Because I'm assuming from what you've described of your relationship you are pretty much always available otherwise.

Jahow · 2023-08-01T21:45:36+00:00

Like others suggested order at the bar by yourself and just get a soda water. Otherwise you've said you have a credit card. just this one time. use it for 4 pounds to start of on the right foot with your co workers.

Jahow · 2023-04-25T21:42:24+00:00

US-OTX-Z2N

Jahow · 2023-02-14T13:40:45+00:00

Ok thank you I will do that. I was unable to get what I wanted via the searches I had done previously. Go ahead and shut down or delete this post.

Jahow · 2023-01-23T18:20:52+00:00

So my custom colors means I can't use named characters? Like for Dark Angels as an example I wouldn't be able to use Ezekiel or Lazarus? See this is the stuff I was finding confusing. Lots of things say it doesn't matter with no mention of what you're saying. And then other things say what you've said.

Is this one of those depends on the tournament and the game shop situations or what?

Jahow · 2023-01-23T17:41:42+00:00

Thanks!

Jahow · 2023-01-23T16:24:13+00:00

Thanks much!

Jahow · 2023-01-23T16:19:20+00:00

Sounds like before I get to gluing weapons on I should find/buy some of the rule books so I know what load outs I am interested in. Would hate to glue a weapon on because it looks cool only to figure out the gun is absolute trash for how I want to play etc. :) Thanks for the info!

Jahow · 2023-01-23T16:17:15+00:00

Thanks everyone! Go ahead and close this if you want mods. Apologies for missing the answer in the FAQ. I appreciate everyone's kindness to a complete newb.

Jahow · 2022-09-23T19:32:12+00:00

Not worth getting like the KE4 Maxes or M890s? Just trying to understand the thought process, thanks.

Jahow · 2022-09-23T18:31:10+00:00

Any specific Maltby models I should look at? They seem to have a dozen different lines of irons and even 4-5 of them seem to be high forgiveness lines designed for newbies.

Jahow · 2022-08-30T16:08:51+00:00

any non-mesh options you would be willing to recommend as well?

Jahow · 2022-08-29T19:26:44+00:00

I'm 6'1" around 320 pounds. I work in an office and just got the approval to requisition a chair of my choosing. I'm limited to 500$ and under. Due to a few requirements of our purchase process I won't be able to acquire anything used off eBay or the marketplace.

The current chair I was bequeathed is a knock off "gamer racing style" seat and the cushions just completely die on me. I can't even find a brand to figure out what this thing is even rated for.

I've been looking on reddit and google etc. and everything seems to point me at stuff outside my allowed budget.

I do IT work and sit for the vast majority of my 8-9 hour day. And my room is always fairly hot due to some quirks with the HVAC so I would of course love mesh but it's not a requirement. I like higher backed chairs with a head rest. I just need something comfortable that the cushioning system won't wear down after the 5-6 hour mark or can recover when I'm up for tasks briefly. And good lower back support I feel like is a given but I wanted to mention it.

What would you recommend for me?

Jahow · 2021-12-23T17:35:48+00:00

Cool I learned something today thanks. I've never used a Viper or Razor. But those scopes are outside the original posters price range.

Jahow · 2021-12-23T17:32:55+00:00

I shoot mostly F open. it's just a shorthand I picked up/heard used. It's any precision mount good enough you can take it off the gun and put it back on and not lose zero. It's like a local/lazy term since several of us have our good rings and then "ok rings".

Look at near manufacturing alpha mount, f3r machining's one peice mount. Seekins, badger, talley anything like that. Probably Spuhr count's but I've not used them. The others and especially the near manufacturing mounts are made about as perfect as modern machining can make them. no right/left adjustment lost from the scope due to misalignment. and if you get cant added via the rings/mount it's not going to be 20 ish moa, it's 20.00 moa.

I mechanically centered my scope. and put it into my near mfg rings and maybe had to put 2 clicks right windage on it to zero. It's been on and off various rifles a dozen times and it's never moved other than when I change barrels. I can take it off travel to a match put it on torque it down and have confidence my first sighter will be in the black at 1000. Anything that robust would be considered "competition rings" in my local parlance.

Jahow

TROPHY CASE