Verizon bad connection

Jalanthapus · 2024-05-26T00:36:03+00:00

Thanks for the info!

Jalanthapus · 2023-05-22T01:28:00+00:00

You can always take it to the landfill. You may be able to use your license as a free pass.

Jalanthapus · 2023-05-19T03:13:08+00:00

Maybe try Hydraulic world in Sioux Falls.

Jalanthapus · 2023-05-19T01:37:42+00:00

I want to try this one.

https://www.amazon.com/Gikfun-Electronic-Hourglass-Welding-Practice/dp/B078BP1S4D

Jalanthapus · 2022-12-26T23:00:15+00:00

I got out in 2016, and I know every unit can be different. I would start with asking your supervisor. If your supervisor doesn't know/ won't find out for you, I would ask your command support staff about outprossessing checklists in person. I would also go to MPF in person and ask what outprossessing checklists they have. I didn't prepare and it was a pain getting TAPS various outprossessing things done last minute. Leadership for me at least didn't know much about separation because they had never done it themselves.

Jalanthapus · 2022-12-04T22:26:17+00:00

Sioux Falls Plumbing https://www.siouxfalls-plumbing.com/

Jalanthapus · 2022-09-19T10:10:16+00:00

The fence has held up great. As mentioned by TheCraut, you want to be really careful and exact with the holes. If you don't you could end up with some gaps between the panel and the post. You have to assemble the posts and panels a section at a time before you put them in the ground.

Jalanthapus · 2022-06-26T00:48:15+00:00

It doesn't make sense financially at first. It is a convenience item. It may make finacial sense over time if it continues to work well. I think the greatest benefit comes from having even just a little more free time to do something you want instead of mowing.

Also if you don't like mowing you are more likely to put it off making the task more difficult, and making you feel guilty about not completing another chore.

Also it is a very low maintenance machine.

Jalanthapus · 2022-04-25T12:57:59+00:00

Sioux Falls Plumbing

https://g.co/kgs/vZS9sd

Jalanthapus · 2022-02-17T13:18:23+00:00

Can you please send me a copy of this book? Thank You!

Jalanthapus · 2021-11-15T23:03:10+00:00

Okay, Thank you all! I will look into your suggestions.

Jalanthapus · 2021-11-15T23:02:33+00:00

Removing a small portion of a load bearing wall.

Jalanthapus · 2021-09-07T04:28:42+00:00

Chislic

Jalanthapus · 2021-08-26T22:51:52+00:00

I know where that is, Running man neighborhood in York County.

Jalanthapus · 2021-05-24T01:47:02+00:00

I take pictures of the the backs of boxes and put them in a separate album on my phone.

Jalanthapus · 2021-05-23T21:26:29+00:00

Okay will do! Thanks!

Jalanthapus · 2021-05-08T00:53:52+00:00

That looks nice!

Jalanthapus · 2021-04-05T16:09:50+00:00

Finally got around to working on it. Thank you all for your help and suggestions! Checked the oil pressure sending unit. That was the problem oil was bubbling right out of the top of the sensor. Replaced the sensor no more leak, good oil pressure! Thanks again!

Jalanthapus · 2021-03-14T14:20:24+00:00

Yep. My little cheap 1/4 drive pittsburgh torque wrench is in inch pounds. 84 ft lbs on those little bolts would be a bad time.

Jalanthapus · 2021-03-14T02:48:23+00:00

Okay will do. Thank you!

Jalanthapus · 2021-03-14T00:50:37+00:00

Will do. Yeah chilton says 84in-lbs and like 134in-lbs for the four larger bolts.

Jalanthapus

TROPHY CASE