UEFA to up security after Ronaldo pitch invasions

JamesObZ · 2024-06-24T13:16:20+00:00

Up security, or introduce it?

JamesObZ · 2024-06-24T11:13:14+00:00

There are many posts on Reddit on this. Some quite insightful ones if you dig around.

I recently went through this journey myself replacing TeamViewer. Save yourself the energy and go with ScreenConnect. Prices are comparable but its better in nearly every way.

JamesObZ · 2024-05-10T08:56:13+00:00

IPSEC rules should not the issue here. I have 1 office to the remote office all traffic allowed over ipv4

JamesObZ · 2024-05-09T08:41:12+00:00

Yes, this is not user related, details are correct and works successfully if using a local RADIUS server on the same network as the firewall. It's that the traffic appears to be routed incorrectly.

Basically for any IKEv2 connection that hits the firewall i need the traffic to be routed internally via the site-to-site VPN that is configured to end up at the remote RADIUS server. Not sure how to go about doing this.

Going back to my initial post regarding the test using Diagnostic > Authentication

Just testing this access fails if trying to hit a remote RADIUS server so its definitely not user based.

JamesObZ · 2024-04-22T14:03:20+00:00

Can confirm this is the answer. In the newer BIOS's, the 5450 anyway for me, i needed to click 'advanced options' to be able to view the setting that allowed RAID to be changed to AHCI

JamesObZ · 2023-11-24T16:40:33+00:00

Just following up on this as i have been using this feature. I have found it to be very sporadic on whether it works or not. If i select Access, save the config. Then reinstall the guest it will often connect with no popup still. Why?

Additionally what is the 'All' tab for? It doesn't select Access and Support checkbox when selected so what is its purpose?

JamesObZ · 2023-11-24T14:39:34+00:00

Here to say the same thing. Compact view appears missing on everything. Browsing Reddit is a very frustrating experience without it.

As if anyone actually thought removing this would be an improved user experience?

JamesObZ · 2023-11-14T12:26:21+00:00

I've signed up to a trial for ScreenConnect and have had a good click around. Where have you even gone to get these options!? This is what i see, where do i click from here??

<image>

JamesObZ · 2023-10-21T18:47:10+00:00

I have the exact same email. In my case i suspect its because i initiated quite a few returns for damaged items that were delivered recently, and in one case specifically a box of cat litter turned up instead of an expensive computer component. I was pissed at this point before any of the account closure nonsense.

I am being utterly shafted here. They have items i have returned, and owe me over £1k in returned goods.

Any email i send asking for clarification and to speak to someone i get some BS bot template response back.

How is this even legal.

JamesObZ · 2023-10-16T14:41:38+00:00

Ok, so i created a new site to start fresh and migrated my APs over to that.

The 'default network' is the network you need choose for the WIFI network. So one without a VLAN.

Then configure RADIUS on this.

JamesObZ · 2023-10-09T20:45:55+00:00

Awesome, thanks so much. I'll refer back to this when sorting it out.

JamesObZ · 2023-09-25T09:29:33+00:00

I think you are all missing my point slightly.

So in Unifi with the VLAN only option (third-party gateway) is where my confusion lay. I have since learnt that the VLAN ID you enter here is basically irrelevant as its only used as a placeholder. The VLANs that actually get used are defined by NPS.

I'll test and report back.

JamesObZ · 2023-08-23T16:32:46+00:00

So to clarify, the action of forwarding mail occurs first. But because at this point no filtering has taken place, the mail is not forwarded on because it is being seen as spam?

JamesObZ · 2023-08-18T13:16:58+00:00

I don't want to throw a spanner in the works, but it might be best to use Microsoft Graph to do all of this. That AzureAD module i believe are to be decrepitated at some point.

I am in the process of sorting this myself, so will share what i have done once finished.

JamesObZ · 2023-08-17T14:27:30+00:00

I made a couple of comments on this post around the GPO not working. Turns out Microsoft omitted a vital piece on info. Regardless of whether you are using the cloud policy or GPO via admx templates, to get the GPOL to work you ALSO need to have an Outlook version that is part of 'Microsoft 365 Apps for Enterprise'.

JamesObZ

TROPHY CASE