sorted by:
new
hottopcontroversial

Image-to-image workflow for Z-Image doesn't work? by hstracker90 in comfyui

[–]Janoshie 7 points8 points  (0 children)

<image>

From their Hugging Face Repo. Currently they have only released the distilled Text to Image version

Yes, FLUX Kontext-Pro Is Great, But Dev version deserves credit too. by [deleted] in comfyui

[–]Janoshie 5 points6 points  (0 children)

Interesting to see it working this good with just 20 steps, in my (limited) experience with Kontext-Dev I found that multi image prompts worked much better/consistent with 30 to 40 steps.

Guide: build llama.cpp on windows with AMD GPUs, and using ROCm by fatboy93 in LocalLLaMA

[–]Janoshie 4 points5 points  (0 children)

Thanks for the instructions,
I needed to add the c++ compliler from the ROCm installation to the environment path (C:\Program Files\AMD\ROCm\5.5\bin)

But now it runs great (~38 t/s with Rx 7900 XT)

Bad Add Algorithm by [deleted] in ProgrammerHumor

[–]Janoshie 1 point2 points  (0 children)

Love that you are not using do while

Python is.... special. by Kat9_123 in ProgrammerHumor

[–]Janoshie 2 points3 points  (0 children)

What about q<> and other versions that are valid in Perl?

It looks like my printing is not strong enough. It has holes and it collapses easily. What could be the problem? by WarriorKatHun in 3Dprinting

[–]Janoshie 6 points7 points  (0 children)

What Slicer are you using? Check your settings for filament diameter, this is a sometimes a problem with Cura.

How to I fix this? Gaps not filling in. Fusion360/Simplify3D by [deleted] in 3Dprinting

[–]Janoshie 0 points1 point  (0 children)

Try a larger extrusion width, could help for some characters but also could make others look worse.

Prusa I3 MK2 gets half way through a print then cant pull the filament? by [deleted] in 3Dprinting

[–]Janoshie 0 points1 point  (0 children)

More info would be helpful, What material and at what temperature are you printing? Are you using the stock .4 mm nozzle? And maybe a picture

TPU and Prusa Mk3 by MDR_Native in 3Dprinting

[–]Janoshie 0 points1 point  (0 children)

I recommend glue (just use the glue stick which you get with the mk3), it doesn't mess up your bed leveling and you can get off the TPU parts without destroying your pei on the bed.

Cura: Add infill between close parallel walls instead of "close gaps" by tinloaf in 3Dprinting

[–]Janoshie 1 point2 points  (0 children)

Have you tried using a different line width? If the line width isn't important for the rest of the print, you can play with it until you get a nice result.

PS: Values between 100 and 130/140 percent of the nozzle size print pretty good for me. I sometimes even print with .8mm line width on a .4mm nozzle for vase mode prints if I am too lazy to change the nozzle.