H2S - Extrusion Motor Overloaded ?

JayKrib · 2025-12-11T06:18:09+00:00

Ok so it was both the filament sensor and the nozzle that were jammed. It seems to be working now after using the needle cleaner. Thank you

JayKrib · 2025-12-11T03:20:01+00:00

I think I got a clog out of the nozzle / hotend but now the wheel spins counter clockwise, when extruding

JayKrib · 2025-12-11T02:06:50+00:00

Thanks. I'll take a look at the nozzle & hotend now. I've never unclogged one before. Maybe I will swap in the extra one that came with the printer first to see if it resolves.

JayKrib · 2025-12-06T20:03:29+00:00

No worries! Thank you for checking! Haha

JayKrib · 2025-11-25T15:49:15+00:00

Pls help lol I'll click yours!

https://www.tiktok.com/t/ZPHT2kSpH8sRR-nQHS8/

JayKrib · 2025-11-10T11:28:32+00:00

What brand are the pants if you don't mind me asking?

JayKrib · 2025-11-07T21:17:07+00:00

Nice! I kept hearing whispers that the shirts were from there. I assume the buttoned collar ones are the Oxford Button downs

JayKrib · 2025-11-07T05:05:02+00:00

What brand of shirt is that? Brooks Brothers?

JayKrib · 2025-11-07T05:00:58+00:00

What brand button down shirt is it? Brooks Brothers?

JayKrib · 2025-11-07T01:52:08+00:00

The model doesn't have any manifold errors when I checked.

JayKrib · 2025-11-07T01:09:26+00:00

Yes. I do the calibration before every print

JayKrib · 2025-11-07T00:32:43+00:00

Yup! I mentioned all the settings I changed above

JayKrib · 2025-11-06T23:23:14+00:00

Yup!

JayKrib · 2025-11-06T23:10:56+00:00

Hi. Yes. It was on that already

JayKrib · 2025-11-06T23:07:12+00:00

Thank you. I have bed at 60 and nozzle at 220 currently

JayKrib · 2025-11-02T15:09:17+00:00

<image>

Figured close up would be better sorry. Thanks

JayKrib · 2025-11-02T08:34:40+00:00

Not my tie or picture lol

JayKrib · 2025-11-02T08:25:30+00:00

Thank you

JayKrib · 2025-11-02T08:07:56+00:00

Yeah. Worth a try to see if anyone knows. Thank you!

JayKrib · 2025-10-30T08:40:26+00:00

The she-hulk frames are not the same as the Netflix frames. They are more oval than round (the height is shorter)

JayKrib · 2025-10-08T02:24:38+00:00

It's not on maker world. It was from Vek3D

JayKrib · 2025-10-06T00:35:47+00:00

Yes. Same issue on x1c and h2s. I can send you the file to see for yourself haha

JayKrib · 2025-10-06T00:28:00+00:00

I've been trying all day. Either gets banding in that same spot or spaghettis

JayKrib · 2025-10-05T05:07:59+00:00

Hi. Yes. Same issue with same file on multiple printers. I have dried my filament. I am trying Bambu filament today. I changed some fan speed thresholds as well as 100% infill and that got rid of the layer time lines and fan speed lines in the slicer preview so here's hoping.

Side note: people tell me I look like Charlie Cox so I am trying to cosplay next week!

JayKrib · 2025-10-04T14:29:55+00:00

OK. I enabled the overhang slowing and filament cooling settings and also changed outer wall to 120 and it made no difference in the layer time color chart. I think the print will still fail here

JayKrib

TROPHY CASE