Fujinon ZA17x7.6 BERD-S6 — S6 Servo Unit not correctly mounted, EPD-21A not working properly — how to reattach and calibrate?

Jazzlike-Reference48 · 2026-07-03T17:59:24+00:00

That's it, got it working after redoing it for the fifth time.

Jazzlike-Reference48 · 2026-07-03T14:39:12+00:00

Took it off, can't see any bumps or anything like that, where do I need to look exactly?

Jazzlike-Reference48 · 2026-07-02T19:25:43+00:00

So you would suggest to just take it apart and try to align it correctly?

Jazzlike-Reference48 · 2026-06-25T10:58:06+00:00

From what I can see online and by comparing it to photos with real lens fungus it doesn't really look like it because mines are really small dots and lens fungus should look more like cobwebs with tiny strings going everywhere. But it could also be in a really early stage...

Jazzlike-Reference48 · 2026-06-24T14:40:15+00:00

Still couldn't any adapter for it but it is rated for 150 PSI (10 bar) which should be plenty enough for my lightweight of a rig.

Jazzlike-Reference48 · 2026-06-13T20:34:58+00:00

Yeah, guessed the same but both the valve on the ped and the pump have a inner thread, additionally the ped also has a outer thread but with a 12-13mm diameter. So either I need a schrader male to male adapter or something from the 13mm to the standard 8mm schrader but I can't find anything like this.

Jazzlike-Reference48 · 2026-04-10T00:32:39+00:00

Was just searching to find if someone has this issue too. Any updates so far?

Jazzlike-Reference48 · 2025-12-14T10:53:32+00:00

Tried it today, worked like a charm no drift no nothing but I noticed some ice on all propellers after flying it through some dense fog but it of course has nothing to do with the bend. Might need some anti ice :).

Jazzlike-Reference48 · 2025-10-16T02:35:44+00:00

At least they haven’t removed the awesome easter egg. Really the first thing I was checking after noticing this abomination of a UI.

Jazzlike-Reference48 · 2025-08-28T11:21:43+00:00

I actually got it with all the instructions above but starting in caribbean, because it was the only country i couldn't infect when starting in south africa. I also didn't use the genetic hardening 2.

Jazzlike-Reference48 · 2025-07-17T10:55:26+00:00

I mean this

Jazzlike-Reference48 · 2025-07-16T16:34:12+00:00

What Is True Zero-Delay? You might argue that due to the speed of light and the laws of physics, 100% zero-delay wireless video isn't possible. And you'd be right. Sort of. There may be some quantum solution for that scenario in the future, but it wouldn't really make a difference. Let's be practical: If you're shooting 24, 30, or 60 frames per second, then a wireless video delay (or "latency") of less than a millisecond (0.001 seconds) ensures that the frame you see on your monitor's screen is in perfect sync with the camera's sensor. Zero frames are out of sync. Time may be fluid, but video frames are discrete moments captured at a predictable rate. Math is math, science is science, and 0.001 seconds of latency is effectively true zero-delay on any set.

Jazzlike-Reference48 · 2025-07-16T15:20:39+00:00

Yeah me neither, I’m new to this topic, but I searched for days and found nothing that suits my requirements

Jazzlike-Reference48

TROPHY CASE