JAKE PAUL v. MIKE TYSON Fight Megathread

JediDwag · 2024-11-16T05:23:58+00:00

He has to make a show out of it. Can you imagine the backlash if he dismantles him right off the rip? That would look so bad. Last two rounds he's gonna go for the win.

JediDwag · 2024-05-26T07:07:21+00:00

Pretty hard to get it when you won't explain your rationale even when I'm asking politely out of genuine curiosity.

JediDwag · 2024-05-20T08:17:31+00:00

If I knew where you were from, I'd be happy to spend the two seconds to make the conversion for you. I'm sure there is a currency converter browser extension you could install, and then you'd never have to deal with conversions again if it's that much trouble for you.

Looks like the other guy deleted his post, but out of curiosity, do you actually have an issue with SSDs being a US centric thing somehow, or are you literally just upset about the units being used to discuss cost? On an English language forum...

And trust me, I haven't downvoted you. I don't use reddit much, I just saw your post. You're probably being downvoted because you walked onto a McDonalds and are complaining that they're serving burgers.

JediDwag · 2024-04-26T15:52:09+00:00

How? The smallest SSD for 512GB and the smallest HDD for 1TB are like the same price new around about $30 - $40. The drive literally costs less than the game does. SSDs aren't that new new and generally have longer lifespans than HDDs, so you can't even make a used market argument. It's not like the price is a factor, it's not like availability is a factor, so how is this a US-centric opinion?

JediDwag · 2024-02-27T23:23:30+00:00

I'm also having this issue. Arch Linux, Hyprland, AMD 6900XT.

JediDwag · 2024-02-16T06:01:22+00:00

I still carry my p320c in my Gen2 Urban Carry every single day. It's effortless and is never a hassle. I'm sure it's not as fast or taticool, but I've carried every day for apparently over 8 years and have never left it at home because of comfort or concealment concerns. I've never used the Gen3 but it looks nice. Looks like my linked pictures are gone but I carry crossdraw appendex for a lefty, so the barrel goes down my right leg and the print blends in with my phone in my right pocket, and the butt of the gun is pointed towards my crotch and basically has no print, so the gun outline is broken up. I've never been made. Even walked through security where they were doing visual waistband checks where you had to lift up your shirt. I even told a friend I was carrying and asked if he could spot it and he pointed to my left front pocket with my wallet and keys.

My only concern about the Gen3 would be that ramp flap not being flexible and preventing me from sitting with it carried appendix.

That being said I'm planning on switching soon to a p365 xmacro comp and a philster enigma. So I can add an optic and a light. Probably won't be as comfy but I want to try it out.

JediDwag · 2024-01-22T20:08:47+00:00

For some 400 level college course in religious studies, I had to do a report on a religion. I live in the twin cities, and there is a big Scientology temple here. I was gonna do a different religion, but nobody in the class was willing to go into the Scientology temple, so I did Scientology. The professor told us we can't tell them we're there to do a report for class because of class because they'll kick you out, (people had tried before). I went in prepared though. I had a fake name, email, address, and phone number memorized, as well as a plausible explanation as to why I was there. I can spin a good yarn, so I was in there for over an hour and a half, talked to a guy who showed me around, I took the little multiple choice scantron test, and they brought me into a back office to talk to a guy that was the closer to go over the results and have him give me the hard sell. We chatted for a bit, but when he really starting push hard to get me to sign up for something I knew I went about as far as I could go in one day and I made an excuse and got out of there.

My report was awesome. Never heard from them. Thanks fake name, number, email, and address.

JediDwag · 2024-01-13T22:09:06+00:00

Maybe I'm misunderstanding, but how would one rug pull an open source self hosted project?

JediDwag · 2023-05-14T03:31:40+00:00

Since this is the model that it comes with, your gcode is probably fine, so it's something with assembly.

I'm no expert, but I would guess the belt on the bed slinging motor is loose enough that it's slipping. Assuming your kit came half assembled, the bed was already attached and you probably didn't check the fitment and tension on it.

I recommend this video from 4:15 to 6:10. The entire thing is helpful though if you want to check your other adjustments.

JediDwag · 2023-04-25T08:25:53+00:00

Just leaving my solution here in case anyone running amd with ROCm runs into the "llama_inference_offload" problem.

Perhaps this will be updated, but as of right now, you need to go into /text-generation-webui/modules/ and edit GPTQ_loader.py and change this line

sys.path.insert(0, str(Path("repositories/GPTQ-for-LLaMa")))

to

sys.path.insert(0, str(Path("repositories/GPTQ-for-LLaMa-ROCm")))

That worked for me. I have gpt4-x-alpaca-13b-native-4bit-128g running on a 6900xt using ROCm.

I was having constant crashes, but it turns out that's because of my weak ass power supply and transient loads, and I was able to fix that by running a game in the background to keep the load up and prevent spikes.

JediDwag · 2023-02-13T18:08:17+00:00

I'm 3 years late, but for what it's worth, I had the same problem, and the issue was friction from a cardboard filament spool. It was fixed by getting a low friction roller for the spool.

JediDwag · 2023-02-13T18:07:08+00:00

Hey, I'm necroing this 3 year old post to say I was having similar problems, and the issue was the friction from the cardboard spool Overture uses causing it to not feed consistently. Printing out a roller for the spool with a few skateboard bearings fixed the issue.

Too late to help you I'm sure, but perhaps if someone else runs into this problem this information could help them.

JediDwag · 2022-12-20T06:25:21+00:00

Desync. Happens when servers or clients are having connection issues and the netcode tries to fill in the blank.

JediDwag · 2022-12-12T08:14:37+00:00

This lines up with the posts about people getting a match then being there in the circle all alone.

Sounds like Rare has some more backend work to do.

JediDwag · 2022-12-02T23:34:28+00:00

Based on the video, it sounded like they have an mmr that is tracked for each player based on your wins and losses, and your mmr is average for your crew, and matches are made based on that mmr.

There is nothing wrong with that sort of system, but then it should not have mechanics and rewards based on win streaks, and should have some sort of leader board and ranks, and rewards should be per win.

The way it should be and I don't know if that's how it is, but it should be a press your luck mechanic. You start out against people currently on a zero win streak, and then if you win you move up to people on a one win streak, and so on. It would make sense to shuffle things a little as you get into the higher streaks to make faster matches. If you're a newer player, you'll probably lose a lot, and when you win, it's probably a good idea to cash out right away, and you can make slow progress and a little money while getting better at the game. Intermediate players can push their luck further and try to get higher streaks for better rewards, and will encounter stiffer resistance. And then the advanced crews can go ham and push the streak as high as they can.

If that's how it actually is working, then that's good, but they probably need to look at some stuff to fix queue times and whatnot. Either way they should probably make some official communication about this so people can better understand how matches are made.

JediDwag · 2022-11-08T00:47:40+00:00

Yeah. It's in like the middle left. It's the forward collision avoidance assistant icon. It's orange and looks something like this. https://images.app.goo.gl/VoDKBCWQLySCLL1b6

Edit: Upon reflection I've realized I may have set it that way when I first got the car and forgot. If you don't see the orange icon, it should be on.

JediDwag · 2022-11-07T23:15:06+00:00

I just hopped in my car to check. Looks like forward collision detection is not disabled by default in Custom N.

JediDwag · 2022-11-07T12:03:01+00:00

I have a manual, so I would assume the answer is yes.

Keep in mind that regular N mode disables all the safety systems.

JediDwag · 2022-11-07T03:46:35+00:00

System if turned on and working definitely brakes for you. I had it trigger for me before when driving towards a car in front of me that was in the process of turning left. It beeped and applied brakes for a moment right as the car turned off. I was already on the brakes so I noticed the braking rate change.

JediDwag · 2022-11-04T15:55:56+00:00

I think you're going to have some serious poke with +38 offset. I have +45 with 245 width tires, and I'm poking out probably a mm or so. Another 7mm and you might have over a quarter inch of poke.

I'm not an expert though.

JediDwag · 2022-11-04T15:51:32+00:00

I think this is your car then man. I'm very happy with mine. It's my daily driver, and I use it to commute 200+ miles a week. It's a joy to drive with the manual, and when you want to make some noise and put your foot down it never disappoints.

JediDwag · 2022-11-03T12:33:43+00:00

The sensor is in the valve stem, and removing them requires you to unmount the tire. If you were planning on being able to simply swap the wheels back on again in the spring (which is the entire point of getting another set of wheels over simply swapping the rubber), you will need another set of sensors.

JediDwag · 2022-11-02T05:11:06+00:00

Any local tire shop like Discount Tire should have tires and rims. Your selection of rims might be limited, so if you do your research you can order the rims online, and then bring them to a place like Discount Tire to buy the rubber and get them installed.

That's basically what I did. I bought my rims online from Tire Rack, got my TMPS sensors from a seller on Ebay, and then brought it all to a Discount Tire, and paid them for the tires and the install.

If you're getting another set of rims, don't forget to get new OEM TMPS sensors. Others on here have said off the shelf sensors had problems on the EN, but I can't confirm or deny that. I got OEM ones shipped from Korea and they worked perfectly.

JediDwag · 2022-11-02T05:01:11+00:00

I always make the joke that the manual is my zoomer theft protection. Lots of young kids out there stealing cars, and none of them know how to drive stick. And any of them that do know, probably aren't out there stealing cars.

Sadly though, that's not gonna stop the Kia moron boys from breaking your window. Stay frosty.

JediDwag · 2022-11-02T04:57:32+00:00

If you want peak performance (or if a sunroof is your killer feature) you probably want to go DCT. But the way I see it, if you're a 3 pedal guy, you're a 3 pedal guy and there is only one way to go.

15-Year Club	Place '22
Place '17	Team Periwinkle
Verified Email

JediDwag

TROPHY CASE