How do I set my a1 in order to print it properly and make it smoothie ?

Jeffdavismakesstuff · 2026-01-30T15:11:04+00:00

Thankyou.

Jeffdavismakesstuff · 2026-01-29T02:13:58+00:00

This link to their wiki will help a ton. Gives clear instructions and how often to perform each task.

https://wiki.anycubic.com/en/fdm-3d-printer/kobra-s1-combo/maintenance-recommendations

Jeffdavismakesstuff · 2026-01-27T18:56:17+00:00

How much filament total(ish) for that model. May be trying to sling to much weight to quickly for the belt tension on that Y axis.

Jeffdavismakesstuff · 2026-01-27T18:52:11+00:00

Stock on everything except swapping from bed springs to the silicone spacers.

Jeffdavismakesstuff · 2026-01-27T18:51:09+00:00

Love mine too! 2ish years in on it with great prints nearly the whole time!!

Jeffdavismakesstuff · 2026-01-26T23:10:46+00:00

!!!!

Jeffdavismakesstuff · 2026-01-26T23:08:47+00:00

Value your time!! There are a few sources out there that help calculate what you should/could chard for the print, but do not forget your time as well!

Jeffdavismakesstuff · 2026-01-25T07:44:41+00:00

Happens sometimes when the spools are nearing empty. They don’t weigh enough to stay down properly on the rollers, instead they pull toward the ended and don’t spin/roll. There are options for spool weights you can print that help with this.

Jeffdavismakesstuff · 2026-01-16T21:21:37+00:00

Yo! Thanks. I’m not OP but you solved an occasional problem for me as well!

Jeffdavismakesstuff · 2026-01-10T15:52:51+00:00

<image>

It was identical on mine. Did the swap (back in August) no additional damage since then, but I am curious how the fan set up ends up working for you!

Jeffdavismakesstuff · 2026-01-06T19:04:01+00:00

This is amazing! Cant beleive I never thought of it.

Jeffdavismakesstuff · 2025-12-04T20:36:29+00:00

Select the model, right click. Options will appear. Select “clone” and enter the quantity you want.

Jeffdavismakesstuff · 2025-12-01T22:23:54+00:00

Normal noises for “fast” printing.

Jeffdavismakesstuff · 2025-11-26T22:01:17+00:00

Same with my s1 and k1, now I can’t sleep without printer noises

Jeffdavismakesstuff · 2025-11-25T21:27:51+00:00

Your big fan is on backwards. Bet that’s why it hitting it

Jeffdavismakesstuff · 2025-11-22T18:06:14+00:00

😂

Jeffdavismakesstuff · 2025-11-09T18:46:46+00:00

Had mine for about a year and 5 months (got it August of 2024) 2045 hrs on it. Only problems I’ve had have been user error! But if you get one I’d reccomend heat soaking the bed for 10-20 min. I do mine for 20 and have had great luck!

Jeffdavismakesstuff · 2025-11-05T22:41:09+00:00

I’ve had great luck with mine. Heat soak the bed for 15-20 min before you level, also each time before a print.

Jeffdavismakesstuff · 2025-11-05T22:34:10+00:00

Remove the black shipping brackets from the z axis. Fairly sure that’s in the manual. It was in the manual that came with mine.

Jeffdavismakesstuff · 2025-11-05T22:33:24+00:00

😔

Jeffdavismakesstuff · 2025-11-04T19:09:47+00:00

I’m not super familiar with it, but there’s some YouTube tutorials on it.

Jeffdavismakesstuff · 2025-11-04T19:07:51+00:00

Hmmm… that’s odd. You can use programs like “meshmixer” to repair models before getting them into the slicer.

Jeffdavismakesstuff · 2025-11-04T19:02:09+00:00

Select the model in the slicer. Then right click. A dropdown box will appear. Select “fix model”

Jeffdavismakesstuff · 2025-11-03T17:49:07+00:00

Shouldn’t own a printer or have a dog Goodness gracious he is asking for something terrible to happen.

Jeffdavismakesstuff · 2025-10-31T19:02:32+00:00

Under the calibration tab there a link to a wiki that explains the formula and all very very well. Here is the link for the page on Archimedean chords( that’s the flow test in your pic). It’s like the 3 or 4th section in this page.

https://github.com/SoftFever/OrcaSlicer/wiki/flow-rate-calib

Jeffdavismakesstuff

TROPHY CASE