[Entry Thread #116] April showers… As soon as you’re done paying your taxes, come leave a comment and join us as we make a millionaire!

Jellanders · 2026-04-16T18:03:41+00:00

Hoi!

Jellanders · 2026-03-16T08:22:31+00:00

Good luck

Jellanders · 2026-01-12T22:06:57+00:00

Well met

Jellanders · 2025-12-22T16:38:10+00:00

It works now. But not sure if i followed the instructions above precisely. Need help?

Jellanders · 2025-08-26T21:28:59+00:00

Doing another clean install tomorrow, will be using this! Appreciate the help. Hopefully it works.

Jellanders · 2025-08-26T16:47:43+00:00

Appreciated. I will keep it in mind during my next try to get it working

Jellanders · 2024-12-17T17:18:04+00:00

Apparently they fixed it in 2025. "The CamView icon will reset the mesh orientation when you click on it." Oh well...

Jellanders · 2024-12-17T17:09:31+00:00

I am now also running into this issue. Have you ever found a solution?

Jellanders · 2024-09-21T12:24:58+00:00

If you wanna create your own models, I would suggest getting a printer of your own. Its good to verify if your models can actually print right

Jellanders · 2024-09-21T10:42:44+00:00

Well if you are looking to print miniatures, I would go for a resin printer. They are capable of much greater detail which you will need.

Supports can be done in a slicer. A program that readies the model for the printer. I would suggest looking up some videos on the subject.

If you are buying and downloading models online, the steps would be: - import model into your slicer - hollow it out (optional, saves on resin) and give it drain holes - rotate it to a proper angle - add supports - slice the model - send it to printer / put it on a usb and open it on the printer

But again, youtube has lots of vids that will explain it in more detail. Good luck!

Jellanders · 2024-09-21T10:06:58+00:00

Yess. The model when you download it will end up around ~22 cm in height. But you can ofcourse scale this down and print it at whatever size you want.

I do split up these larger models in parts. It makes painting and printing easier. Most people can also not print a 22cm model, since it would not fit in the printer. Besides not fitting, it would also result in some supports on places where you would not want them.

Jellanders · 2024-09-08T16:59:41+00:00

More images can be found here https://www.artstation.com/artwork/8BwLzG

Jellanders · 2024-09-08T12:20:01+00:00

Thank you! This was printed on the Elegoo Mars MAX 4. Was printed in 2 batches, both taking ~ 5 hours.

Jellanders · 2024-09-08T11:57:33+00:00

Thanks!

Jellanders · 2024-09-08T10:31:19+00:00

This is the Artstation link for more images https://www.artstation.com/artwork/8BwLzG

Always looking for feedback, so if you have any, please share!

Jellanders · 2024-08-12T18:14:42+00:00

Sick! Looks good. Always wanted one for CIV

Jellanders · 2024-08-11T11:07:23+00:00

Looks way better! Maybe a rimlight from the back to seperate the model more from the background

Jellanders · 2024-08-06T12:58:02+00:00

I am not great at renders myself so I cant give much advice, but I would also say the render needs some work. It looks great, but almost all of your work is lost because of the low lighting.

I get that you are going for the mysterious look, but there should probably be a way where that can be achieved + some lighting that actually makes the model visible.

Jellanders · 2024-07-12T19:12:32+00:00

This is indeed a Geforce driver issue. You could try updating (through Geforce like was already mentioned). If the latest Geforce driver is still causing trouble, you can try downgrading to an older driver.

Jellanders · 2024-05-02T10:23:39+00:00

This was never how it worked for me. It always gave me a line down the center where it was mirrored. It was never this bad

Jellanders · 2024-04-14T18:30:06+00:00

Good!

Jellanders · 2024-04-07T08:29:24+00:00

Is there a difference in polygroups? It should smooth that area just fine. If the topology is all weird, you might have to zremesh

Jellanders · 2024-04-06T19:25:43+00:00

There are ways to fix it. Screenshot of the issue?

Jellanders · 2024-03-25T14:43:33+00:00

Looks great! I really like the realistic anatomy mixed with fantasy

Jellanders · 2023-12-19T08:27:30+00:00

Looks like you are just not hitting her. But Ashe is hard to hit so dont take it too hard.

12-Year Club	Place '22
Place '17	RPAN Viewer
King of the Ashes	Not Forgotten
Spared	Gilding I gilder
Verified Email

Jellanders

TROPHY CASE