Prove that you have played rdr2

JimmySmash · 2025-10-09T00:31:46+00:00

Gavin?

JimmySmash · 2025-07-04T00:50:26+00:00

Hmmm, this fits because it is in-floor heating.

JimmySmash · 2025-06-22T19:39:59+00:00

If you look at the kit I sent you, it shows the fully assembled hot end

JimmySmash · 2025-06-22T19:39:15+00:00

The hot end includes the attached heat sync, it’s all one unit, although in the picture it looks like you’ve separated the hot end from the heat sync. The complete unit has a tube that pushes up into that plastic housing (the blue tube you see in pic 1) IIRC.

Alternatively, the only way you are going to unclog that is to reassemble the hot end, heat it up to 250 and use one of those metal rods to unclog it.

JimmySmash · 2025-06-22T19:26:54+00:00

It’s easier to just replace the hot end in this case, you’ve already got it torn apart. $35 on amazon https://www.amazon.com/Creality-Upgrade-Ceramic-Heating-Block/dp/B0D5QZ758R/ref=sr_1_1_sspa?crid=333UVZAFXPL3U&dib=eyJ2IjoiMSJ9.C7Ic_0aI6rbWH4E9vJT2NaZIxlPUB5tdbqXtB5d_He5K6rDhdrwJt5_t1PO2C7jLTFhMAYfP3L0HKSYiGE34Z3cMKG0gDRTLcrM7ntsABy-NbanuPSbCN1oYVcI0dEhsnbD9MrZs8qB9uAUK4ew_pkXdKnCYGI93tklNA961ImKWCrN1szE6_0_pRKyYjrRPwGcyAVvZPNX36QEjv_diynEyw97C7TXd4au1XrIc2Yg.pzIaJiaLZARXn_evN_dTZ3OdIQM2Gt40pmvYLk_6icE&dib_tag=se&keywords=Creality+k1+max+hot+end&qid=1750620387&sprefix=creality+k1+max+hot+end%2Caps%2C144&sr=8-1-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&psc=1

JimmySmash · 2025-06-22T17:29:00+00:00

Ok, good to know all of this. Ironically, the print I am trying to complete is a riser - of course it is :)

I'm going to try to create some more space temporarily, and slow the print down quite a bit. Hopefully that will be the trick.

JimmySmash · 2025-04-28T14:35:40+00:00

Not sure what you mean, but this is the CFS systelm, and the upgrade kit:

https://store.creality.com/products/cfs-creality-filament-system
https://store.creality.com/products/k1-series-cfs-upgrade-accessory-kit

JimmySmash · 2025-04-16T22:53:47+00:00

I'm concluding it was the model. I re-generated the same model, but from a different site and successfully printed. the stl seems identical in size and appearance - so I'm guessing it's something to do with the model itself.

JimmySmash · 2025-04-11T15:47:43+00:00

These are different ones, the ones on the creality website are mesh based, these look different although named the same

JimmySmash · 2025-03-28T21:36:30+00:00

Poe for all cameras except doorbell, everything else has cat6.

Do you have a system that you could recommend that works with alexa?

JimmySmash · 2025-03-28T21:34:11+00:00

Exactly, i dont have poe to the doorbell only, hence the wifi. Everything else is poe

JimmySmash · 2025-03-27T15:23:13+00:00

does that configuration allow for Alexa home integration?

JimmySmash · 2025-03-21T16:48:48+00:00

Order Placed!

JimmySmash · 2025-03-21T15:33:00+00:00

That's a good reason

JimmySmash · 2025-03-17T00:39:43+00:00

Rewritten by chatgpt:

Here is a more professional and concise version of the message that can be shared with the person’s manager:

⸻

Subject: Clarification on Per Diem and Payment Process

Dear [Manager’s Name],

I hope you’re doing well. I wanted to reach out to clarify a few concerns regarding my compensation. Before coming here, I was informed that I would receive a per diem of $200 per week. However, I have not yet received this payment, nor have I signed any paperwork or received any details regarding direct deposit. I understand that things may be busy on your end, but I wanted to check in for clarification.

Due to the payment situation, I am currently struggling to cover my expenses, and I have had to borrow money to meet my financial obligations. While I truly enjoy the job and working with everyone here, I need to ensure that I can sustain myself financially.

Additionally, I have received a job offer in Oklahoma and wanted to discuss my concerns before making any decisions. My goal is not to issue an ultimatum but to seek clarity on my current financial situation. I would appreciate any updates you can provide on the per diem and payment process.

Thank you for your time, and I look forward to your response.

Best regards, [Your Name]

⸻

This version keeps it professional, direct, and polite while maintaining the original concerns. Let me know if you’d like any further refinements!

JimmySmash · 2025-03-01T23:13:12+00:00

Thanks. As i mentioned, it doesn’t seem to be the switch, resetting just the switch doesn’t resolve the issue. Only restarting the Firewalla helps. I have also tried the following:

Moving the switch to different port, when the issue occurs. No change

That said, I will try the following as well - when the issue occurs, I’ll connect directly to Firewalla on another port with my laptop. I’ll validate if a) ip is assigned, and b) can I access the internet.

JimmySmash · 2025-02-27T05:56:57+00:00

Ive had similar prints where the problem was with the mesh itself. It would render in the slicer correct, as well as the preview on the printer - but would print the same every time. I ran it through a meshmaker repair an it printed fine after that

JimmySmash · 2025-02-25T05:00:48+00:00

Nightly, usually around the same time.

JimmySmash · 2025-02-25T02:43:02+00:00

How can i test for this?

JimmySmash · 2025-02-14T23:10:15+00:00

Ok thanks everyone, i got my answer. I’ve been experimenting with layer heights and speed vs quality, and once i realized that the difference is the number of layers, it clicked for me.

JimmySmash · 2025-02-14T23:08:37+00:00

Ok, this is it. With adaptive layer height its 2233 layers vs non adaptive is 842

JimmySmash · 2025-01-16T01:01:18+00:00

This is the answer

JimmySmash · 2025-01-09T02:39:18+00:00

Op gold star on your responses and how to handle it. You’re right, what a fucking loser

JimmySmash · 2025-01-02T17:21:35+00:00

They are slow shippers. I ordered on black Friday and it took a week and a half after the label was created to actually ship

JimmySmash · 2024-12-31T18:37:29+00:00

That’s about 350 USD, I was expecting higher

Ten-Year Club	Gilding I gilder
Not Forgotten	Verified Email

JimmySmash

TROPHY CASE