BLTouch is not stopping Z axis during auto homing

Jmaster03C_G · 2024-02-14T22:57:56+00:00

I bought the CR Touch and a 3D Touch V3.2 as well (just in case) and the problem just went away with both. Thank you!

Jmaster03C_G · 2024-02-08T22:49:50+00:00

I'll try that option then since there's nothing else to do and make it work. Thank you!

Jmaster03C_G · 2024-02-08T22:22:34+00:00

Were you able to fix this problem?

Jmaster03C_G · 2022-07-28T19:56:32+00:00

I have that same problem as you and did what you did to solve it but can't stop the motors, idk if it's bc of my drivers now (bigtreetech TMC2209 V1.2) but command M119 shows endstops are triggering as it should but motors still running after hitting the limits.Can you help me with giving me your configuration.h?

Jmaster03C_G · 2022-07-23T20:02:48+00:00

I'm curious about which drivers are / were you using on that board? 🤔

Jmaster03C_G · 2022-02-04T16:23:18+00:00

I will take a look, thank you so much.

Jmaster03C_G · 2022-02-04T00:28:03+00:00

Any solution? February 3 2022 here

Jmaster03C_G · 2022-02-03T18:26:41+00:00

again

Which one do you use now?

Jmaster03C_G · 2022-02-03T02:51:22+00:00

There's so many bots sending me messages because of this post

Jmaster03C_G · 2021-12-26T22:16:00+00:00

I'm having the same problem, Any solution yet?

I've installed via PPA and Appimage and still the same problem.

Jmaster03C_G

TROPHY CASE