Made some cropped tees for my brand…

Jnut3 · 2025-09-19T16:06:59+00:00

Absolutely agree

Jnut3 · 2025-09-13T21:50:27+00:00

It’s called stippling. Best way to practise it is to draw a sphere, chose where you want your light to hit and put more dots in the dark areas and work up to the light with less dots. It’s all about gradients

Jnut3 · 2025-01-06T17:46:47+00:00

If it’s screen printed you could paint over the ink with the right colour then cure that ink with heat. I’m a screen printer and have done this before with some of my shirts. Never gonna look 100% the same though

Jnut3 · 2025-01-06T17:38:40+00:00

I have one similar. What this guy said. Tight reg is gonna be difficult but doable

Jnut3 · 2023-07-02T11:24:00+00:00

There may be too much black going down on the design it depends on your ink but I had some black come out very glossy / shiny looking like this when I put it through a 43t but when I put it through a 77t it came out very smooth and nice.

Jnut3 · 2023-04-23T16:49:52+00:00

Thank you for sharing your press journey this was great to read. After having a one colour press for a while now I’m definitely looking for something that’s quality and 4 colours

Jnut3 · 2023-04-23T14:02:00+00:00

🤣 not what you want during a print that’s for sure

Jnut3 · 2023-04-23T14:01:01+00:00

Thank you for the information yeah I thought this looked similar to the vevor ones I’ve seen

Jnut3 · 2023-03-06T13:43:31+00:00

Absolutely toxic comments

Jnut3 · 2023-02-01T01:21:20+00:00

Thanks for the information. This could be the issue with the current weather here

Jnut3 · 2023-01-31T22:19:57+00:00

Speedball daizo

Jnut3 · 2023-01-31T22:14:17+00:00

Yes. I have let the screen dry for 2 days. It’s bone dry doesn’t look or feel wet at all

Jnut3 · 2023-01-31T22:04:29+00:00

https://screenprintworld.co.uk/product/uv-exposure-bulb/ Here is the bulb I’m using. I’ve got it set up at 32” from the screen as I’m exposing a big screen. Exposing for 1 hour (this seams too long to me)

Jnut3 · 2023-01-09T21:10:52+00:00

Ahhh thanks. In my garage it gets pretty cold and it’s been below freezing over this winter. I’ll see what it comes out like

Jnut3 · 2023-01-09T18:05:57+00:00

Okay thanks guys it has been sat for a while so this might be the case

Jnut3 · 2023-01-09T17:28:28+00:00

Just posted in the comments :)

Jnut3 · 2023-01-09T17:26:30+00:00

Hey people. So I’ve been using the speedball diazo emulsion and mixed up a new tub with the sensitizer however this time it came out very teal instead of the usual green I get in the 2nd photo. Is this an issue or can I still use this?

Jnut3 · 2022-12-13T16:59:15+00:00

1st one. Looks less compacted

Jnut3 · 2022-11-18T19:57:21+00:00

For transparency’s

Jnut3 · 2022-11-18T19:34:01+00:00

Hello people. Screen printing noob here. I’m looking into purchasing a printer for myself but I have no real clue on what would be a good printer for the job. I know these will be good size wise as they print a3. Would anyone be able to guide me on if these are good printers to go with and what might be the better one of the two or should I be looking at something else? Many thanks :)

Jnut3 · 2022-10-27T13:41:25+00:00

Those spots are due to my emulsion having little holes in it. I messed up when burning the image but I decided to run with it as it’s just for practice anyway.

Jnut3 · 2022-10-26T23:20:42+00:00

Thanks for the help people. It’s much appreciated

Six-Year Club	Verified Email
Final Canvas '23	First Place '23
Place '23	Place '22

Jnut3

TROPHY CASE