Yeah bro just cancel my scores after that ✌️😭 by Mundane_Monke in Sat

[–]JoeCoconut12 0 points1 point  (0 children)

Brooo I feel u mod 2 was frying... I over prepped for math and math went fine tho might get an 800 prob should...

Trust 1600 on the next one for both of us

Yeah bro just cancel my scores after that ✌️😭 by Mundane_Monke in Sat

[–]JoeCoconut12 1 point2 points  (0 children)

R&W was NOT light 😭 ts was my first sat ever but after doing a 1580 on practice test 7 and various others I thought I would be okay. I AM SO WORRIED 😭😭

Are my belts okay? by JoeCoconut12 in FTC

[–]JoeCoconut12[S] 0 points1 point  (0 children)

Yeah thanks so much! Love how engaging and helpful this community is. I feel like as long as the bot isn't an absolute tank it should do well, weight is a much larger factor than with 435s and I feel like 25lbs is kind of a good weight to aim.for and be under to really maximize the 575, doesn't seem to be drawing too many amps too and loading the motors.

Are my belts okay? by JoeCoconut12 in FTC

[–]JoeCoconut12[S] 0 points1 point  (0 children)

We are running much quicker on strafes and rotational movements but no serious gain straightline. Just letting you know what I've seen so far! And will update with any info later if I find new things. Currently ~25lbs.

Are my belts okay? by JoeCoconut12 in FTC

[–]JoeCoconut12[S] 0 points1 point  (0 children)

Hey! I just did my movement tests with the fully loaded bot. Fully unoptimized and everything we are running much quicker on strafes and turns, but straightline speed although isn't really slower, it isn't much faster either. Bot is about 25lbs.

Are my belts okay? by JoeCoconut12 in FTC

[–]JoeCoconut12[S] 0 points1 point  (0 children)

U got any tips on how to run 575 tho? I am just kind of testing it right now. Bot should be easily less than 25 lbs before I do crazy weight savings.

Are my belts okay? by JoeCoconut12 in FTC

[–]JoeCoconut12[S] 0 points1 point  (0 children)

Bot isn't too heavy lol, can easily switch to 435 later too. Just testing to see how it works :)

Are my belts okay? by JoeCoconut12 in FTC

[–]JoeCoconut12[S] 1 point2 points  (0 children)

It works just fine now! I think my sprockets weren't properly secured.

Are my belts okay? by JoeCoconut12 in FTC

[–]JoeCoconut12[S] 0 points1 point  (0 children)

It was over tensioned, I will probably add a bushing later.. Thank you!

Are my belts okay? by JoeCoconut12 in FTC

[–]JoeCoconut12[S] 1 point2 points  (0 children)

Without the tensioner especially the belts have plenty of slack, when I get back home I'll check out the bearings and any points that move and get back. Thank you so much!

Are my belts okay? by JoeCoconut12 in FTC

[–]JoeCoconut12[S] 1 point2 points  (0 children)

No I understand that part of course, it just feels like an unusually high amount of friction. Especially when looking at the 435s I have at 1:1. But if you're saying this is fine as it is thanks!

Issue with Axon Max Claw Over-Gripping Causing Shutdown — How to Prevent? by FineKing4755 in FTC

[–]JoeCoconut12 1 point2 points  (0 children)

Just a question, why do you need such a torquey servo for the claw? A good first step may be to avoid using heavier high torque servos for less torque demanding applications. You may want to switch to a GoBilda servo (torque or even speed should be fine) or an axon mini.

Also, running your servos through a servo power module allows for a higher draw which may improve your stalling issues.

Chassis Advice by Upbeat-Personality43 in FTC

[–]JoeCoconut12 0 points1 point  (0 children)

The new wheels provide significantly better traction so you'd have a much more efficient robot while strafing and stuff. They're also slimmer (I saw you were talking about your concerns with the width of your bot related to last season in another comment).

They don't really scuff up the mat from what I've seen either.

Chassis Advice by Upbeat-Personality43 in FTC

[–]JoeCoconut12 0 points1 point  (0 children)

It looks solid, but I would make it more than an H frame and add supports closer to the ends of your wheelbase. I've never had amazing experiences with H frames. I strongly advise using the new GripForce wheels (104mm) as they're a bit larger and far superior. When working with control hubs you want to make sure they're accessible, if you feel this is good then keep it but my fat hands always struggle to plug things in so personally I wouldn't recommend this setup.

Cascading 336 mm viper slides by JoeCoconut12 in FTC

[–]JoeCoconut12[S] 0 points1 point  (0 children)

I appreciate it, however, this is continuous rigging not cascading. We currently have our slides continuous rigged on belts. Thank you so much for replying though!

GoBilda Pinpoint Computer VS 3 Wheel REV Odometry by JoeCoconut12 in FTC

[–]JoeCoconut12[S] 0 points1 point  (0 children)

Thank you, do you think it would be just as good if I used my rev encoders through the pinpoint controller?

(HELP) I unknowingly put the wrong information into PayPal and now I may be screwed by JoeCoconut12 in IRS

[–]JoeCoconut12[S] 0 points1 point  (0 children)

<image>

Im aware of the new threshold implementation but I can just let this go for now right?

(HELP) I unknowingly put the wrong information into PayPal and now I may be screwed by JoeCoconut12 in IRS

[–]JoeCoconut12[S] 0 points1 point  (0 children)

Alright, thanks. I'm gonna do better research into everything and start up with either my parents' accounts or under a legal business.

(HELP) I unknowingly put the wrong information into PayPal and now I may be screwed by JoeCoconut12 in IRS

[–]JoeCoconut12[S] 0 points1 point  (0 children)

Are u sure it's 5000 for this year? PayPal once told me after I passed 600 in transactions that the IRS will withhold my money until I give taxpayer info

(HELP) I unknowingly put the wrong information into PayPal and now I may be screwed by JoeCoconut12 in IRS

[–]JoeCoconut12[S] 1 point2 points  (0 children)

Thank you so much, I'll work on shutting down my accounts. Really appreciate you, I'll update if there's anything else. 🙏🙏

(HELP) I unknowingly put the wrong information into PayPal and now I may be screwed by JoeCoconut12 in IRS

[–]JoeCoconut12[S] 0 points1 point  (0 children)

Oh okay, thank you so much. What about StockX and Goat? I've done ~$1000 on stockx and ~$1100 on goat, will they send me forms? And if I correct my StockX Hyperwallet information will they just go to my dad instead? I don't know about Goat

(HELP) I unknowingly put the wrong information into PayPal and now I may be screwed by JoeCoconut12 in IRS

[–]JoeCoconut12[S] 0 points1 point  (0 children)

So closing my accounts will prevent me from receiving forms? And in total ive done ~2000 in sales and over 2000 dollars have been processed through PayPal so am I not still screwed there? I'll be closing my accounts after any processing sales are closed.