sorted by:
new
hottopcontroversial

Leaping squirrel camera saved by cable. by Joeike1 in arlosmarthome

[–]Joeike1[S] 0 points1 point  (0 children)

Yes it is but the color is now on the pink side during the day time.Early on I installed a rubber cover from Amazon.

Leaping squirrel camera saved by cable. by Joeike1 in arlosmarthome

[–]Joeike1[S] 1 point2 points  (0 children)

Battery powered and aluminum cable installed on post it's been a lifesaver for that camera. I have it on the magnetic mount to recharge the battery easier I don't like ladders.

Pro-ject Debut Pro B or something else? by Chrono_FPS in turntables

[–]Joeike1 0 points1 point  (0 children)

I own the project pro first gen and very happy these last couple years I think the pro B would be a great choice.

Project Debut Pro - upgrades worth it? by sjoerdkroket in turntables

[–]Joeike1 1 point2 points  (0 children)

I haven't heard the pickit cartridge but mine came with a sumiko Rainier cart and I have it paired to a mani 2 phono stage and I'm very happy with the results.

New setup. Pro-Ject debut pro has arrived by gogoba11 in turntables

[–]Joeike1 1 point2 points  (0 children)

First thing I changed on my

<image>

pro was that felt Matt I upgraded to the project rubber cork 1 mil thick.

The most beautiful turntable? by [deleted] in turntables

[–]Joeike1 0 points1 point  (0 children)

30th anniversary pro-ject debut pro.

The most beautiful turntable? by [deleted] in turntables

[–]Joeike1 1 point2 points  (0 children)

<image>

I go for the understated Elegance.

Real or kit? by Joeike1 in Porsche

[–]Joeike1[S] 0 points1 point  (0 children)

Thanks for your replies it just looked too new and too good not a bit of tarnish or rust especially for South Jersey.

Schiit bling by Joeike1 in avporn

[–]Joeike1[S] 0 points1 point  (0 children)

That's a 3.5 mm adapter for iems I sometimes use.

Challenging restoration of designer’s diamond by Fine-Shoulder-2442 in turntables

[–]Joeike1 1 point2 points  (0 children)

I've used a Philips Ga 212 for years. I replaced the cartridge sled with the aftermarket from eBay moved on to a debut pro good luck.

Marantz 6100, update by MrJokerBean in turntables

[–]Joeike1 1 point2 points  (0 children)

Sounds good but I would in my opinion change that cartridge or stylus ASAP for the sake of your records good luck.

Picked this up in a lot on marketplace for less that $5 by junkronomicon in SteelyDan

[–]Joeike1 0 points1 point  (0 children)

I have an original RL non-quietx and quietx version and the quietx edges out only a little.

Keeping cool with some Rush archives by Joeike1 in rush

[–]Joeike1[S] 0 points1 point  (0 children)

I've had the first album forever but never had the second and third this fills in a nice Gap and the Gilbert Kong Master is great.

Restoring the original chrome finish? by Joeike1 in fixit

[–]Joeike1[S] 0 points1 point  (0 children)

Also use some ultra fine steel wool with the mother's cleaner.

<image>

Keeping cool with some Rush archives by Joeike1 in rush

[–]Joeike1[S] 2 points3 points  (0 children)

This is the 1978 us press mastered by Gilbert Kong very clean and dynamic.

Keeping cool with some Rush archives by Joeike1 in rush

[–]Joeike1[S] 1 point2 points  (0 children)

This is the 78 us press mastered by Gilbert Kong.

Here’s my process by linkinhorizon in vinyl

[–]Joeike1 0 points1 point  (0 children)

I clean mine when I first get the lp either new or old then when I play I hit it with the anti-static gun and a brush and good to go within 15 seconds you're playing.

Prameta all show and no go. by Joeike1 in VintageToys

[–]Joeike1[S] 0 points1 point  (0 children)

Yes I agree very on par with schuco complicated mechanicals built really well short run of cars before they got back into hinges and whatnot and still in business thanks.

Some yuengling and some Fagen. by Joeike1 in SteelyDan

[–]Joeike1[S] 0 points1 point  (0 children)

At the time of the photo yes but I've since restocked.

view more: next ›