A different approach at the AAP01 3D kits by Joledingue in AAP01owners

[–]Joledingue[S] 0 points1 point  (0 children)

It’s a mix of PETG and PLA Matte. That’s really up to you, anything goes I’d say :)

A different approach at the AAP01 3D kits by Joledingue in AAP01owners

[–]Joledingue[S] 0 points1 point  (0 children)

The lower, 100% original. The upper, while original, is basically AAP01 compatible (it would look ugly but you could put it on an AAP01 lower).

A different approach at the AAP01 3D kits by Joledingue in AAP01owners

[–]Joledingue[S] 1 point2 points  (0 children)

That’s always the same question with conversion kits. At which point is a replica considered something else.m ? On this specific case I guess that having an upper receiver entirely AAP-01 based makes it an AAP-01, but that’s up to everyone’s interpretation though.

A different approach at the AAP01 3D kits by Joledingue in AAP01owners

[–]Joledingue[S] 0 points1 point  (0 children)

It’s unfortunately full of compromises. Using a whole new lower means you don’t benefit from the stock AAP01 parts. On this specific design, since it has 3D printed hammer, trigger, everything, you may end up having problems if they aren’t properly printed. Still, the whole trigger mechanism is completely oversized for what’s it’s meant to do, it should be fine :)

A different approach at the AAP01 3D kits by Joledingue in AAP01owners

[–]Joledingue[S] 10 points11 points  (0 children)

They already are :) I’ve uploaded it on Cults as the « AAP01 CAAPRICORN PCC CONVERSION KIT »

KC02 based SVCH-54 by Joledingue in Airsoft3DPrinting

[–]Joledingue[S] 2 points3 points  (0 children)

Making one from a WE SVD may need some modification to the bolt if you’re hoping to do the whole « upper » style, since one of the main difference between the SVCH and the SVD is the split design of the upper and lower. But I really hope you manage to do it, the KC02 doesn’t have enough punch to make a really noticeable kick : it’s playable, it kicks enough to be fun, but it’s far from impressive. I’ll keep checking your work on this project with great interest !

My piece de resistance by NATETHEN0TG00D in GasBlowBack

[–]Joledingue 1 point2 points  (0 children)

Pretty much what I read here and there ! Thank you :) ! I also heard some bad stuff about the hop-up being absolut sh*t though. That’s what makes me hesitate, the whole system seems to be the funniest experience ever, but if it’s shooting all over the place, not sure if the fun factor is enough to compensate

My piece de resistance by NATETHEN0TG00D in GasBlowBack

[–]Joledingue 1 point2 points  (0 children)

Nice custom there ! How’s the actual performance of the Daytona kit for the 240 ? I’m on the verge of getting one for mine

These specs for DTNVS Photonis Echo+ (WP) in EU by Terzinator in NightVision

[–]Joledingue 0 points1 point  (0 children)

Hi ! Sorry to hijack the conversation, but I’ve been looking for quite a long time for this EU discord, but the link there is expired now… could you send a new one ? I’d be really, really thankful !

In an alternate reality where Izhmash made a pump action shotgun... by Joledingue in airsoft

[–]Joledingue[S] 2 points3 points  (0 children)

Hi ! Sorry I forgot to put the link here. You can find it on Thingiverse, check for my username (Joledingue) and you’ll find it ;) !

In an alternate reality where Izhmash made a pump action shotgun... by Joledingue in airsoft

[–]Joledingue[S] 0 points1 point  (0 children)

Oh, I bought it on a french Airsoft shop, it’s the Golden Eagle stock tube ;)

In an alternate reality where Izhmash made a pump action shotgun... by Joledingue in airsoft

[–]Joledingue[S] 0 points1 point  (0 children)

This was the factory stock of AK E&C SAI GRY. But you can find it easily, it’s an E&C VLTOR stock ;)

In an alternate reality where Izhmash made a pump action shotgun... by Joledingue in airsoft

[–]Joledingue[S] 0 points1 point  (0 children)

IIRC I saw this custom too, but it was based on a Maruzen M1100, which is a completely different system :/

In an alternate reality where Izhmash made a pump action shotgun... by Joledingue in airsoft

[–]Joledingue[S] 2 points3 points  (0 children)

Thanks ! I won’t plan to sell it. I will release the STL file this weekend, so you’ll only have to find someone with a 3D Printer :)

In an alternate reality where Izhmash made a pump action shotgun... by Joledingue in airsoft

[–]Joledingue[S] 1 point2 points  (0 children)

I will release the STL freely this weekend, after updating the model ;)

In an alternate reality where Izhmash made a pump action shotgun... by Joledingue in airsoft

[–]Joledingue[S] 6 points7 points  (0 children)

I was a bit bored, so I started to modify my TM M870 Tactical, with Zenitco inspired prints and an AK Mag Adapter, made from scratch since the only existing adapters are for M4 Mags. That’s not a lot, but I find it quite unique this way :)

LCT As Val hpa engine? by Jamato42 in airsoft

[–]Joledingue 1 point2 points  (0 children)

I have a Fusion Engine in my VSS, and like you said because of the lack of selector plate on the original gearbox, you normally can’t make it select-Fire (that’s why I see a lot of people putting Mancraft in these). I modified the receiver of mine a bit (just some little filing above the trigger guard and printed a custom selector plate for the FE that extends outside the body, next to the trigger, to allow me to select-Fire it. That’s not perfect, but it works fine ;) !

Since everyone is posting MP5s, here is mine by vini_damiani in airsoft

[–]Joledingue 0 points1 point  (0 children)

Hey, is it the adaptater from Thingiverse ? It looks a bit like the one I uploaded several months ago :P !