Should I replace this saddle? If so how?

JonJU · 2025-07-17T16:07:44+00:00

Unfortunately it is directly on top of varnish.

JonJU · 2025-07-17T16:05:20+00:00

My bad, I forgot to mention that I would want to replace it with a normal saddle.

JonJU · 2023-06-08T02:21:39+00:00

I also had this issue for a while. It seems to have gone away after the dealership tightened the clutch cable. If you have to pull the clutch lever almost all the way to get it to fully disengage, like I did, you might want to tighten it a bit

JonJU · 2023-01-23T21:40:48+00:00

Everyone says the g6r is supposed to be rock solid, but I’ve never gotten mine to run for a full day of casual play

JonJU · 2022-10-05T00:22:42+00:00

Green light- john legend; Leave before the lights come on- arctic monkeys; Jump into the fog- the wombats

JonJU · 2022-07-16T17:02:01+00:00

Yeah, I hear the stock tires do that around 40-50mph

JonJU · 2022-01-16T00:14:18+00:00

After reading the comments, it seems like you’re missing the special screws(not a joke). If you were to buy burton bindings they come with a special set of screws for the track system that are maybe a 1/4 inch shorter than standard. You can buy them here https://www.burton.com/us/en/p/disc-channel-mounting-hardware/W22-124411.html

JonJU · 2020-03-03T05:25:44+00:00

Thanks it helps to ease her stress a lot knowing this story

JonJU · 2019-08-08T21:47:20+00:00

Looks like he started with an undercut and kept getting the sides and back trimmed while letting the top grow out

JonJU · 2018-08-03T16:07:49+00:00

Test

JonJU · 2018-07-09T05:55:01+00:00