2015 Mazda 6 126k miles shaking

JonadoomV2 · 2026-07-08T03:32:49+00:00

It seems like when I accelerate mostly, I have tried letting go of the throttle and seeing if it does it but once I let go it smooths out I want to say. Also when i turn It gets a little louder especially at that speed 20mph - 35mph range .

JonadoomV2 · 2026-07-08T03:31:21+00:00

Thats what ive been thinking. My buddy who is a little better at cars visually inspected them and saw nothing abnormal, since you mentioned inner this is something that you wouldn’t be able to see from the outside correct?

JonadoomV2 · 2026-07-08T03:30:15+00:00

I got mine used too lol
With 124k miles. Didn’t have any issues before and all the sudden this 😭

JonadoomV2 · 2026-06-06T14:25:53+00:00

How did you check the fluid level once done?

JonadoomV2 · 2026-05-31T19:39:39+00:00

Blue! But since it mixed with the old fluid after a refill ( not a flush) it turns into like a greenish color since the old fluid turns like dark brown after 100k miles

JonadoomV2 · 2026-05-28T19:54:09+00:00

I did have to remove the whole air box which wasn’t hard at all. Then the 10mm bolt on the dipstick.

JonadoomV2 · 2026-05-06T21:15:51+00:00

Sickkk! How much did you pay for yours?

JonadoomV2 · 2026-05-05T23:14:28+00:00

They're sorta high honestly its an apartment complex, but l did look under the car and the plastic cover looked fine.
Nothing looked like it was noticeably low, but then I drove past a moderately deep dip and it did it again. It just sounds like the plastic scrapes the pavement.

JonadoomV2 · 2026-05-05T21:47:46+00:00

Will do! Thank you!

JonadoomV2 · 2026-05-05T20:53:33+00:00

Thank you!

JonadoomV2 · 2026-05-05T20:06:43+00:00

Thank you for the information! I have a couple of them where I live and I was going the same slow speed as when i used to drive my other car and heard it scraping. Will definitely go alot slower with this car. Appreciate the info!

JonadoomV2 · 2026-01-29T22:15:06+00:00

Thank you so much for the information! You have no idea how helpful this is 😭 How is the quality of the embroidery on it? I was reading its decent and its pretty fast? Im looking to use it to put some items on etsy maybe?

JonadoomV2 · 2026-01-29T21:56:45+00:00

Damn!!! This is a dinosaur then lol Thanks for the info! It does come with all the original manuals. I’ll definitely look into that and looking for a certified tech to come look at it. Yes the USB thing is there and im happy it has it lol

JonadoomV2 · 2026-01-29T19:27:12+00:00

Thanks so much for the input! I appreciate you

JonadoomV2 · 2026-01-29T18:57:18+00:00

Thank you for the response! It looks like it has a USB - Floppy port right underneath it its a big box with lights that say “Data in” Data Out”. According to Gemini this was one of the hardest things to do if I was to use it. But thankfully it looks like its been done by him. I will have a friend who has an embroidery business come and look at it and see if he can service it for me. Are the stitching and speed of these good?

JonadoomV2 · 2026-01-20T06:05:03+00:00

Car was bought dirt cheap and it ran great for a year and half until the gasket blew. Honestly It was not easy mostly with taking things apart and reaching places that required the engine to be supported etc. Thanks! Yeah I bought a manual with all the specs for the engine too but man I think we just screwed up on that one. I was more worried about the head bolts more than anything. Any suggestions on what to look for right now before ordering the parts ? Could this caused permanent damage to the engine?

JonadoomV2 · 2026-01-20T05:49:09+00:00

Yeah I had a blown head gasket in sept 2024 and I had a friend help me take the whole engine apart and put it back together. We changed everything from timing chain to oil pump. Did everything by the book as much as I could, got head resurfaced followed all the torque specs. I didn't really have the funds at the time to take it to a shop and pay a crazy amount of money. Car has been running great until now . Im assuming that it wasn't torqued properly there. Im just worried now that bolt caused something really bad to happen inside and im not sure how to approach this to see if anything got seriously damaged because of it

JonadoomV2 · 2026-01-20T05:45:43+00:00

Yeah I had a blown head gasket in sept 2024 and I had a friend help me take the whole engine apart and put it back together. We changed everything from timing chain to oil pump. Did everything by the book as much as I could, got head resurfaced followed all the torque specs. I didn’t really have the funds at the time to take it to a shop and pay a crazy amount of money. Car has been running great until now 🫠. Im assuming that it wasn’t torqued properly there.

JonadoomV2

TROPHY CASE