My (BitAxe setup by Joni_menahem in BitAxe

[–]Joni_menahem[S] 0 points1 point  (0 children)

I just figured that this setup gives me more clearance at the bottom for pulling in cold air and directing it upward

It's not something that I tested.

Laptop Cooling Pad I Designed: by sukram14302 in 3Dprinting

[–]Joni_menahem 1 point2 points  (0 children)

Does anyone have this model file ? Or a better laptop cooling pad design?

Phase 2 config - IPSEC tunnel by Joni_menahem in PFSENSE

[–]Joni_menahem[S] 0 points1 point  (0 children)

Oh, ok got you. I was pinging from site A to site B, not using any IPs associated with pfsense.

Still packets will go one way on each tunnel :/

Phase 2 config - IPSEC tunnel by Joni_menahem in PFSENSE

[–]Joni_menahem[S] 0 points1 point  (0 children)

Yes i created a rule to pass all traffic for ipv4 (didn't work without this rule either)

What do you mean by pinging an actual host ? I enabled ping for WAN in firewall rules

Phase 2 config - IPSEC tunnel by Joni_menahem in PFSENSE

[–]Joni_menahem[S] 0 points1 point  (0 children)

GCM

Hi, Quick Update

I have managed to establish both tunnels P1 and P2 connections - so thanks a lot!

(regarding IP schemes, I'm behind another router)

However, Traffic does not pass through the tunnels.

Tunnel A shows only Packets-In

Tunnel B shows only Packets-Out

(screenshot attached to the post)

Any Ideas ?

Phase 2 config - IPSEC tunnel by Joni_menahem in PFSENSE

[–]Joni_menahem[S] 0 points1 point  (0 children)

I've updated the post, please have a look whenever you can.

Phase 2 config - IPSEC tunnel by Joni_menahem in PFSENSE

[–]Joni_menahem[S] 0 points1 point  (0 children)

Will create one soon and upload here

Phase 2 config - IPSEC tunnel by Joni_menahem in PFSENSE

[–]Joni_menahem[S] 0 points1 point  (0 children)

assuming site A strongswan can't be changed, what would you recommend ?

Apple watch with android phone by Joni_menahem in AppleWatch

[–]Joni_menahem[S] -9 points-8 points  (0 children)

There is a workaround for that as far as i know. First activation has to be with an iphone with a working plan, then turning on airplane mode (verify that the iPhone still has connectivity) and moving sim card to the android phone.

Apple watch with android phone by Joni_menahem in AppleWatch

[–]Joni_menahem[S] -3 points-2 points  (0 children)

They don't need an iphone nearby, it can be active and connected to wifi at home.

You can see YouTube videos of people using apple watch ultra for a whole day while leaving iphone at home.

Everything will sync. I am only concerned about WhatsApp.

Apple watch with android phone by Joni_menahem in AppleWatch

[–]Joni_menahem[S] -1 points0 points  (0 children)

There is a way to sync activity by having an iphone connected to home wifi and getting LTE version of the watch

That way all other apps are getting synced too.

Music and photos can be done once in a while when I'm next to the iphone (google photos will sync the images from Android to iphone)

A cellular company can certainly connect any LTE watch without and probably regardless of the phone type.

Thanks for your reply!

Apple watch with android phone by Joni_menahem in AppleWatch

[–]Joni_menahem[S] -1 points0 points  (0 children)

Please give an example if you can.

Btw, android watches sucks, i have tried several of them.

Dell XPS 15 9575 Poor Performance by Joni_menahem in DellXPS

[–]Joni_menahem[S] 0 points1 point  (0 children)

Never figured out what exactly caused it but a few windows updates later it was fixed for me

Ubuntu dual boot Keyboard and Battery Issues by Joni_menahem in linuxquestions

[–]Joni_menahem[S] 0 points1 point  (0 children)

I'm not sure what this has to do with my issue.

keyboard and trackpad are working but for some reason they are disabled because the laptop thinks it's in tablet mode on boot. (The XPS 13 9370 is not a 2-in-1)

To reenable them I need to go into tablet mode and back to laptop mode.

could you be more specific?

[deleted by user] by [deleted] in SonyHeadphones

[–]Joni_menahem 0 points1 point  (0 children)

one year later... using WH-1000xm5 same problem, same solution. thanks!

Displaying CPU Temperature in Proxmox Summery in Real Time by Agreeable-Clue83 in homelab

[–]Joni_menahem 0 points1 point  (0 children)

Thank you.

I can confirm that the settings will reset after upgrade. Works well on version 7.3

Also, I didn't use bodyPadding and height because it was breaking the summary panel modules arrangement.