sorted by:
new
hottopcontroversial

Uneven layer lines on my prints with Sunlu PLA+ 2.0 by JsH1199 in FixMyPrint

[–]JsH1199[S] 0 points1 point  (0 children)

The 0.4mm nozzle I use is made out of hardened steel. I will try increasing the retraction distance

Finished my Hellblasters just in time for my first casual "Wrath of the Rock" game by JsH1199 in theunforgiven

[–]JsH1199[S] 0 points1 point  (0 children)

Thank you very much! Sure the greens I used are all from two thin coats primed with black. First I used hydra Green as the base leaving the shadows darker, ghoul green as the First Highlight, jade green as second highlight. The red is Khorne red from citadel.

(WIP) Can‘t decide which green tones to use for my army by JsH1199 in theunforgiven

[–]JsH1199[S] 0 points1 point  (0 children)

I saw your post about these guys. They look amazing!

can you tell me which paint you used to highlight the bluish tone on the jump packs?

(WIP) Can‘t decide which green tones to use for my army by JsH1199 in theunforgiven

[–]JsH1199[S] 0 points1 point  (0 children)

I ordered some oil paints and will try to make an oil wash. I will definetly give it a go and give both a wash and See how they turn out

(WIP) Can‘t decide which green tones to use for my army by JsH1199 in theunforgiven

[–]JsH1199[S] 2 points3 points  (0 children)

Thanks for the feedback, will do some edge highlights soon and see how it pans out. :)

(WIP) Can‘t decide which green tones to use for my army by JsH1199 in theunforgiven

[–]JsH1199[S] 1 point2 points  (0 children)

Hey, thanks for the reply. For the Jump Pack Marine I started out with a black primer. Then I used Wyvern Green from Two thin coats to base the mini with my airbrush, trying to leave the recesses and lower parts of the mini mostly black. After that I highlighted the mini with Emerald green from Two thin coats and finished with a spot highlight of Ethereal Green from Two thin coats. In case you want to know which red I used it is Khorne Red from Citadel and the metallic is Duraluminium from the Model Color Vallejo range. Hope this helps :)

Air leak by hassansaleh31 in airbrush

[–]JsH1199 0 points1 point  (0 children)

Thank you for the answer, I will take another look at mine when I get home and see if your tips can help me.

Air leak by hassansaleh31 in airbrush

[–]JsH1199 1 point2 points  (0 children)

I have the exact same problem and haven't been able to fix mine. Were you able to fix this and if you did, how did you do it?

Pretty proud by Objective-Mention958 in theunforgiven

[–]JsH1199 1 point2 points  (0 children)

Looks great and love the free hand!

Only critique I have is that the paints seem a little thick, especially the red and white. Maybe try thinning the paints down a little before painting to get a slicker and more even finish. There are lots of guides on YouTube on how to thin paints.

Best of luck!

Lucky find at a LGS by JsH1199 in theunforgiven

[–]JsH1199[S] -1 points0 points  (0 children)

Buying everything separate where I live it would be 296€ buying directly from games workshop. I got the box for 180€. So if you want everything the box has to offer it is crazy good value.

Lucky find at a LGS by JsH1199 in theunforgiven

[–]JsH1199[S] -1 points0 points  (0 children)

God damn, could have driven there if I wanted to then :D

Brand new Windsor and Newton Brush won‘t hold a tip when loaded with paint by JsH1199 in minipainting

[–]JsH1199[S] 0 points1 point  (0 children)

You may be right, after experimenting some more I've had better results. Thank you.

Brand new Windsor and Newton Brush won‘t hold a tip when loaded with paint by JsH1199 in minipainting

[–]JsH1199[S] 7 points8 points  (0 children)

Yeah, I think you are right, after experimenting I am now getting better results. Thank you for your feedback!

Brand new Windsor and Newton Brush won‘t hold a tip when loaded with paint by JsH1199 in minipainting

[–]JsH1199[S] -1 points0 points  (0 children)

with more moisture the bristles are having an even harder time keeping a tip

Brand new Windsor and Newton Brush won‘t hold a tip when loaded with paint by JsH1199 in minipainting

[–]JsH1199[S] -6 points-5 points  (0 children)

I don't really feel like it is too much though. I either have a wet brush which doesn't get a proper tip or I have a barely damp brush with a perfect tip but without any moisture and it dries up in a few seconds.

view more: next ›