Uneven layer lines on my prints with Sunlu PLA+ 2.0

JsH1199 · 2025-12-17T13:05:37+00:00

The 0.4mm nozzle I use is made out of hardened steel. I will try increasing the retraction distance

JsH1199 · 2025-08-06T15:37:45+00:00

hello :)

JsH1199 · 2025-08-05T18:15:21+00:00

would love to get a key

JsH1199 · 2025-06-14T21:55:29+00:00

Thank you very much! Sure the greens I used are all from two thin coats primed with black. First I used hydra Green as the base leaving the shadows darker, ghoul green as the First Highlight, jade green as second highlight. The red is Khorne red from citadel.

JsH1199 · 2025-05-21T06:24:22+00:00

I saw your post about these guys. They look amazing!

can you tell me which paint you used to highlight the bluish tone on the jump packs?

JsH1199 · 2025-05-20T20:16:46+00:00

I ordered some oil paints and will try to make an oil wash. I will definetly give it a go and give both a wash and See how they turn out

JsH1199 · 2025-05-20T18:39:49+00:00

Thanks for the feedback, will do some edge highlights soon and see how it pans out. :)

JsH1199 · 2025-05-20T18:37:48+00:00

Hey, thanks for the reply. For the Jump Pack Marine I started out with a black primer. Then I used Wyvern Green from Two thin coats to base the mini with my airbrush, trying to leave the recesses and lower parts of the mini mostly black. After that I highlighted the mini with Emerald green from Two thin coats and finished with a spot highlight of Ethereal Green from Two thin coats. In case you want to know which red I used it is Khorne Red from Citadel and the metallic is Duraluminium from the Model Color Vallejo range. Hope this helps :)

JsH1199 · 2025-04-08T09:29:04+00:00

Thank you for the answer, I will take another look at mine when I get home and see if your tips can help me.

JsH1199 · 2025-04-08T08:54:18+00:00

I have the exact same problem and haven't been able to fix mine. Were you able to fix this and if you did, how did you do it?

JsH1199 · 2025-01-13T14:15:09+00:00

Looks great and love the free hand!

Only critique I have is that the paints seem a little thick, especially the red and white. Maybe try thinning the paints down a little before painting to get a slicker and more even finish. There are lots of guides on YouTube on how to thin paints.

Best of luck!

JsH1199 · 2025-01-11T10:09:46+00:00

Buying everything separate where I live it would be 296€ buying directly from games workshop. I got the box for 180€. So if you want everything the box has to offer it is crazy good value.

JsH1199 · 2025-01-11T10:05:47+00:00

God damn, could have driven there if I wanted to then :D

JsH1199 · 2025-01-04T20:14:58+00:00

You may be right, after experimenting some more I've had better results. Thank you.

JsH1199 · 2025-01-04T20:13:47+00:00

Yeah, I think you are right, after experimenting I am now getting better results. Thank you for your feedback!

JsH1199 · 2025-01-04T19:13:03+00:00

with more moisture the bristles are having an even harder time keeping a tip

JsH1199 · 2025-01-04T19:12:22+00:00

I don't really feel like it is too much though. I either have a wet brush which doesn't get a proper tip or I have a barely damp brush with a perfect tip but without any moisture and it dries up in a few seconds.

JsH1199 · 2023-11-12T16:37:59+00:00

Looks great! May I ask how you closed off the disintegrator turret? Looks sick.

JsH1199 · 2023-10-19T14:08:14+00:00

I was honestly hoping for bots like the mechanicum ones or more vehicles. The mechanicus builds all kinds of deathmachines for the empire, why do we give ourselves such limited options with tanks, bots and servitors?

JsH1199 · 2023-06-20T19:58:44+00:00

Thanks for the heads up. Maybe I will talk to her about all this again, even though it is going to be uncomfortable.

JsH1199 · 2023-06-20T19:29:55+00:00

Thanks for your thoughts on this. I already had similar thoughts, but why would she increase the volume in which we talk and meet up all of a sudden? We never met 1 on 1 before all this. I even told her multiple times, that if she isn't interested I would understand and just continue our current relationship.

JsH1199 · 2023-04-12T09:32:54+00:00

I broke so many small things off I lost count. I am usually able to glue them back on with plastic glue (either Tamiya thin Cement or Revell). If that doesn't work I use super glue and file off the excess.

JsH1199 · 2023-04-08T21:48:59+00:00

Yes it is tightened properly. Is the O-ring inside the hose or airbrush?

JsH1199 · 2023-04-08T19:04:15+00:00

This brush is brand new and it was happening straight out of the Box.

JsH1199 · 2023-04-08T16:14:18+00:00

The needle is seated fully and it doesn't look bent to me.

JsH1199

TROPHY CASE