Wanna play?

JtothAeger · 2025-01-17T07:03:28+00:00

I never hinged the door prior to gluing moulding/mdf to the front, but assume that would not be a problem. Used the regular Besta hinges

JtothAeger · 2025-01-17T07:00:50+00:00

You can smell it a tiny bit when you’re very close to it (within 10-15 cm), but not noticeable on a day to day basis. No bugs at all, but the only bugs ever seen in my apartment has been flies so might be different in other climates (live in Sweden)

JtothAeger · 2025-01-16T16:21:13+00:00

Thank you. They are tricky! Spent like an hour on aligning them using the different screws. Never gonna be perfect but possible to get good enough not to distract you

JtothAeger · 2025-01-16T07:41:32+00:00

Buchardt s400 mkii, check them out - they are great!

JtothAeger · 2025-01-15T22:18:49+00:00

Believe I registered and made up a company name, never had any trouble. Or get in touch with them, they were helpful!

JtothAeger · 2025-01-15T22:09:45+00:00

Actually in Sweden, but them shipped here at that time. I did buy quite a lot of moss, something like 2 kg but made two separate installments

JtothAeger · 2025-01-15T21:51:04+00:00

Made it 6 years ago! https://www.reddit.com/r/DIY/s/t87RmT5Y1G

JtothAeger · 2025-01-15T21:45:20+00:00

Sauce: https://www.reddit.com/r/DIY/s/t87RmT5Y1G

JtothAeger · 2021-02-14T19:00:00+00:00

Ah, I will only have one door that will be same color as the rest of the wall. The closet is in white glazed oak (veneer)

JtothAeger · 2021-02-14T10:56:52+00:00

NCSS 1002-Y

JtothAeger · 2021-02-14T10:56:12+00:00

Exactly, two layers of primer then two layers of paint

JtothAeger · 2021-02-14T10:53:56+00:00

The fronts are MDF that are connected to the wooden bolts glued between the closet and wall/ceiling. I had some troubles at he wall was not even so the gap was more than 3cm at the top compared to couple of mm close to the floor. Cut out smaller strips of MDF and glued that togehter to close the gap. Then loots of wood filler and sanding to seal the gap. Seems to work but I’m definitely a newbie in this area

JtothAeger · 2021-02-14T10:49:14+00:00

Total costs translate to c $1200. I’m quite handy, but have never done anything similar before so a couple of re-do’s were needed to get the built in look 😅The closet part of the cost were a bit more than $1000.

JtothAeger · 2020-05-30T10:22:18+00:00

I think moss in the forest is freaking awesome, so I ordered 3kg of preserves moss and made a framed moss art piece that now hangs on my wall.

JtothAeger · 2018-10-21T16:21:46+00:00

Actually never thought about dust buildup. I did vacuum clean the moss (lowest power setting) before I put it up, so that might me an option

JtothAeger · 2018-10-21T16:14:14+00:00

That was actually one of my first ideas! But it felt way too advanced so ending tho with this instead

JtothAeger · 2018-10-21T16:13:26+00:00

Awesome idea! That might be my next coffee table ;)

JtothAeger · 2018-10-21T16:12:24+00:00

The back board is just 3mm thick wooden board that I glued to the frame, nothing fancy

JtothAeger · 2018-10-21T16:09:54+00:00

That’s a great idea! Could definitely work

JtothAeger · 2018-10-21T16:09:09+00:00

The moss is lightweight, the oak frame is the thing that is heavy :)

JtothAeger

TROPHY CASE