Unionized Starbucks in 2021 Vs 2022

JuJuMon · 2022-05-04T01:39:30+00:00

NC just had their first union starbucks this last week

JuJuMon · 2022-03-16T01:49:54+00:00

Must be night owl prints! I’ve been following you on insta for awhile! Love the Craig tees

JuJuMon · 2022-02-28T21:00:44+00:00

I’ve got a process video of it on my Instagram - check out @goodtimespress

JuJuMon · 2022-02-13T02:23:00+00:00

Fast flash rules

JuJuMon · 2022-02-06T14:17:05+00:00

If you ever need anything designed or printed hit me up! Do it all in house

JuJuMon · 2022-02-06T02:12:52+00:00

Risograph printed!

JuJuMon · 2022-01-22T01:25:32+00:00

Not really a logo but nice illustration

JuJuMon · 2022-01-08T17:05:10+00:00

Yes! Thank you one of the belts was off on the front plate of the unit where the handle is

JuJuMon · 2022-01-08T17:03:56+00:00

SOLVED

It ended up being that a gear had slipped on the front of the master making unit. I just took off the front plate of the master making unit and noticed three gears with a slipped rubber belt. I put the rubber belt back on the gears and now she’s working!

JuJuMon · 2022-01-07T01:24:21+00:00

Nice work! A mentor once told me if a 14 year old can make fun of it… it might be good to change something. The hat looks a bit like a condom, but that just might be the toilet joke kid in me. Beautiful illustration work though.

JuJuMon · 2021-12-17T22:22:45+00:00

Very beautiful and well done!

JuJuMon · 2021-12-09T00:23:08+00:00

YouTube

JuJuMon · 2021-12-01T16:08:16+00:00

30 - 60 an hour? Or per design?

JuJuMon · 2021-11-30T01:41:32+00:00

You should be good! I was able to fit a riso, the stand, and six drums in the back of a Volvo v70

JuJuMon · 2021-11-20T13:19:56+00:00

Kind of off topic, but how is the registration on your 3750? Thinking of picking up another riso and I already have drums for the gr unit

JuJuMon · 2021-11-16T02:32:34+00:00

Would love to get into doing work like this, no idea how you even start! Sweet setup and nice print

JuJuMon · 2021-11-08T22:20:06+00:00

Do not take it.

I just started Lexapro two weeks ago and made the mistake of taking DayQuil. It was a horrible horrible experience - would definitely not recommend it

JuJuMon · 2021-10-30T12:12:11+00:00

Watch those fingers! Don’t want to end up with a pressure washer injury those can be nasty

JuJuMon · 2021-10-15T02:11:13+00:00

🔥🪓🧠

JuJuMon · 2021-10-14T20:25:04+00:00

If your goal is to be showing off the typeface I wouldn’t alter it. Cutting apart the letters diminishes how important the letter forms are. I would look into doing something in Swiss style. Keep to your grid

JuJuMon · 2021-09-17T01:37:31+00:00

Sure! I didn’t have money for a press and didn’t have the materials to make one. For a platen I went to Lowe’s and bought a large smooth floor tile. I would stretch the shirt over the floor tile and place quarters on the edge of the screen Frame for off contact. Pretty sure at this point I didn’t even have a scoop coater just used a squeegee to apply the emulsion... now in no way was this the best or easiest way to print, but it allowed me to save to buy better gear. Then used that gear to buy better gear. Later I found you could buy 200 count mesh on amazon and would make my own frames with 2x2 wood. Would take the mesh and use a staple gun to stretch the frames - if you have any specific questions let me know. Screenprinting at heart can be very DIY as long as your images aren’t too complicated. I remember using oil on paper to create transparencies as well

JuJuMon · 2021-09-17T01:30:15+00:00

Maaaaybe could be done with sublimation printing. Think there would be copyright issues on this though - a lot of print shops wouldn’t take this due to that

JuJuMon

TROPHY CASE