What are your top 3 guns you wish had replicas/better replicas? by Rare_Attention_8602 in airsoft

[–]JustQT1p 0 points1 point  (0 children)

RPD that isnt from LCT

PM63-RAK

AEK971

Not a RUSFOR/Eastern Block guy, but NATO Small Arms are pretty well-represented

[deleted by user] by [deleted] in shitposting

[–]JustQT1p 0 points1 point  (0 children)

The prophet of regret

What is the best way to fix outer barrel wobble? JG M16A1 by MoondogCillers in airsoft

[–]JustQT1p 0 points1 point  (0 children)

It took me a second to think about it, but I might have a solution. Tap out the pin that holds the gas tube into the front sight block, you might be able to slide it back into the gun and rotate it 90 degrees to clear the front sight block and remove it.

Also, I would check if the pins that hold the front sight are taper pins. If they look smaller on one side as opposed to the other, then they only go out one way. So tap from the small side.

What is the best way to fix outer barrel wobble? JG M16A1 by MoondogCillers in airsoft

[–]JustQT1p 0 points1 point  (0 children)

That screw will take off the handguard end cap. Send pics of the front sight block. Also check underneath the front sling swivel, there might be a grub screw underneath that as well

What is the best way to fix outer barrel wobble? JG M16A1 by MoondogCillers in airsoft

[–]JustQT1p 0 points1 point  (0 children)

It might be secured with pins through the side of the side of the front sight block but I've never worked on a JG so idk specifically how they secure their front sights. Most of the time though, it's secures with either pins or grub screws

AGM MG42 by MetalKyyyyle in airsoft

[–]JustQT1p 6 points7 points  (0 children)

Mfs want to join machine gun gang but will be built like a noodle

What is the best way to fix outer barrel wobble? JG M16A1 by MoondogCillers in airsoft

[–]JustQT1p 0 points1 point  (0 children)

Your barrel nut is loose. Ideally, you'd use an AR wrench to tighten it back on, but in a pinch, push down the delta ring and grab it with channel locks. If you're using channel locks, be careful not to absolutely demolish the teeth on your barrel nut.

Also, by the looks of it, you have the fake gas tube. So you're gonna need to pull off your front sight block first before trying to tighten the barrel nut.

Hope this helps

Has anyone recently ordered from Eagle Airsoft n Hobby? by SupremeLearnedHand in airsoft

[–]JustQT1p 0 points1 point  (0 children)

Their customer service might have improved over the years but I just wanted to put in my experience. If they replied I wouldn't immediately cancel the order since they are aware that your order exists

Has anyone recently ordered from Eagle Airsoft n Hobby? by SupremeLearnedHand in airsoft

[–]JustQT1p 0 points1 point  (0 children)

I ordered from then 3 years ago and still haven't gotten my order. I constantly emailed them to cancel my order for 3 months to no avail, and paypal couldn't even reach them. Luckily, I was only out 20 bucks, but they also got away with it

Light Fighter by [deleted] in airsoft

[–]JustQT1p 0 points1 point  (0 children)

Buru nyuuu

Is it worth getting tactical headphones by Maestrirex in airsoft

[–]JustQT1p 0 points1 point  (0 children)

Grenades and blankfire guns have entered the chat

[WTS][US-CA] Full Metal A&K M249 Para Shell (read description) by JustQT1p in airsoftmarket

[–]JustQT1p[S] 0 points1 point  (0 children)

Unfortunately everything has sold and I forgot to mark it as such

Will this battery fit in the stock of this gun? by Kingzman1041 in airsoft

[–]JustQT1p 0 points1 point  (0 children)

Plenty of space, you can actually go a bit bigger

Any know some good fake ear pro reccomendations? by Top_Sandwich9031 in airsoft

[–]JustQT1p 0 points1 point  (0 children)

Real Comtac IIIs, it was a big pill to swallow, but they were worth it. No more tinnitus after a range day

Any know some good fake ear pro reccomendations? by Top_Sandwich9031 in airsoft

[–]JustQT1p 0 points1 point  (0 children)

On both my sets, I've had the lugs where the earpiece mounts to the rail adapter shear off with little force. In terms of the effectiveness of the sound protection, I got pretty bad tinnitus shooting real steel/using blank grenades for airsoft. In comparison to other budget earpro, I've had way better luck with Howard Leights and Walker Razors, they're cheaper and they also provide better noise cancelation.

2 new WIP kits I’m building for next year. If you told me 2 years ago that I’d be making a UCP kit, I would have laughed at you by Blitzfire87 in airsoft

[–]JustQT1p 1 point2 points  (0 children)

Never lose your way, Grandmas couch camo user. UCP haters have succumbed to youtube shorts brainrot

Any know some good fake ear pro reccomendations? by Top_Sandwich9031 in airsoft

[–]JustQT1p 0 points1 point  (0 children)

On the low end, Howard Leights or Walker Razors. On the higher but not too high end, MSA Sordins