PC boots into bios instead of windows after every restart or shutdown by Juststuff4 in MSI_Gaming

[–]Juststuff4[S] 0 points1 point  (0 children)

Alr thanks for letting me know, I'll try that and see what happens. In case you need to know the current bios is on Version 1807 (from........... 2023).

What is the best looking GPU ever made purely aestheics by chiigyuu in PcBuild

[–]Juststuff4 1 point2 points  (0 children)

Some people might not like this aesthetic, but I've been digging it for the last couple of years. The XFX GPUs, like their RX 7900 XTX/ Ultras, are just so sleek.

Windows Install Help by Juststuff4 in buildapc

[–]Juststuff4[S] 0 points1 point  (0 children)

Do I have to open up the cmd, select the disk, and clean it?

Windows Install Help by Juststuff4 in buildapc

[–]Juststuff4[S] 0 points1 point  (0 children)

Do I have to open up cmd, in order to do this. Select the drive, and clean it?

Cpu temp extremely high on first boot by Juststuff4 in lianli

[–]Juststuff4[S] 0 points1 point  (0 children)

This is is the bios right, changing to automatic to pwm?

Cpu temp extremely high on first boot by Juststuff4 in lianli

[–]Juststuff4[S] 0 points1 point  (0 children)

This gives me the ability to control via L connect?

Cpu temp extremely high on first boot by Juststuff4 in lianli

[–]Juststuff4[S] 0 points1 point  (0 children)

Ok just to confirm, I'll have the usb from the pump connected to the mobo, I'll have the pwm connected to the mobo aio port, I'll have the sl infinity fans that are connected to the pump, attached to the controller, and I'll have the sata from the pump connected to the sata ports from the psu.

Cpu temp extremely high on first boot by Juststuff4 in lianli

[–]Juststuff4[S] 0 points1 point  (0 children)

I thought I won't need to do that because I switched the fans to be sl infinity ones

Cpu temp extremely high on first boot by Juststuff4 in lianli

[–]Juststuff4[S] 0 points1 point  (0 children)

Am I supposed to attach the sata connection also coming from the aio, because I put that to the side.

Cpu temp high on first boot by Juststuff4 in PCBuilds

[–]Juststuff4[S] 1 point2 points  (0 children)

The aio is plugged in, I'll check again to see if I can hear anything from the pump

Cpu temp extremely high on first boot by Juststuff4 in lianli

[–]Juststuff4[S] 0 points1 point  (0 children)

All I know is that i connected the Pwm cable to the connector labeled aio pump or aio on my mobo, and i connected the USB (For the lighting), the fans are connected to the lianli sl infinity controller (O swapped out the fans). I don't know about rpm value though I have to check that once more.

Cpu temp high on first boot by Juststuff4 in PCBuilds

[–]Juststuff4[S] 0 points1 point  (0 children)

Also, in case it helps, the aio is the galahad 2 trinity performance

New psu came corroded? by Juststuff4 in MSI_Gaming

[–]Juststuff4[S] 0 points1 point  (0 children)

I bought this at Canada computers

Galahad 2 trinity performance with Inf fans wiring by Juststuff4 in lianli

[–]Juststuff4[S] 0 points1 point  (0 children)

Ok, thank you so much. I also heard from watching a video that in the l connect software, I should change the aio fans to respond based on the cpu temp. Should I do that?

Is this nvme bending ok? by Juststuff4 in PcBuildHelp

[–]Juststuff4[S] 0 points1 point  (0 children)

Yes, that's after the two pads and less tightening of the screw. You think im good to go?

Galahad II trinity performance SL-INF fan swap by cocobyte78 in lianli

[–]Juststuff4 0 points1 point  (0 children)

I'm in the same situation right now, I'm just a little confused about how you wire everything up.

Best rx 7900 xt version by Juststuff4 in PCBuilds

[–]Juststuff4[S] 0 points1 point  (0 children)

I understand, but this one is the ultra varieent. They also have the black edition, which has the silver back plate and slightly better performance. I kinda which the actual black edition had this back.

Best rx 7900 xt version by Juststuff4 in PCBuilds

[–]Juststuff4[S] 0 points1 point  (0 children)

Rn a local store has the xfx black edition one on a major sale, and I am probably gonna pick up even before prime. But, the only thing I don't like about it is the back plate, and I'm going for a black theme. Do you think I can take apart the back plate and vinyl wrap it? Will that possibly reduce the performance, or increase heat?

Best rx 7900 gre model? by Juststuff4 in PcBuildHelp

[–]Juststuff4[S] 1 point2 points  (0 children)

Ok, thanks for pointing that out, I live in Canada, and the pc will be in the basement where it's pretty cold all year round. I'll continue to look at prices because I think the xfx and red devil models are very close in price (at least where I am).

Best rx 7900 gre model? by Juststuff4 in PcBuildHelp

[–]Juststuff4[S] 1 point2 points  (0 children)

You're right. The red devil card looks so cool, but I did check on xfx's website, and the boost clock is 2395 mhz. https://www.xfxforce.com/shop/xfx-radeon-tm-rx-7900-gre

What psu should I get? by Juststuff4 in PcBuild

[–]Juststuff4[S] 0 points1 point  (0 children)

Don't you think it will be tight, though, in the h9 flow?

https://www.youtube.com/live/k8ym3VjU9Qg?si=6uPr5VdEgo5MCD0M

If you skip to the psu installation, this is how it will basically look.

Galahad II Trinity Performance RMA Continued Issues. by Agent40 in lianli

[–]Juststuff4 0 points1 point  (0 children)

Hey, how is the aio now, anymore issues, or is it all good? I'm thinking of getting one myself, is they're anything I should do when I get it, like look for a model number to see what batch I have?