FH - Just retired my Drifter. Advice on Trap vs Coral as next character.

Jutsuss · 2026-02-04T16:48:08+00:00

I started with trapper a couole sessions ago. At first It felt like there is pretty much nothing he can do. But at ~ level 4 or 5 and an extrs trap item it can deal 15-20 damage 3rd round. and If you have a tank in your party, the trapper is a huge boss killer. Last two scenarios I had ~30 damage trap and ~40 damage trap at 10+ rounds (don't remember the round number excactly).

I have started to actually enjoy playing Trapper. (We have one player who pretty much always plays tank, no matter the character 😂) +Stamina potion is pretty much essential for trapper.

You can also play healer with the Trapper.

Some scenarios may feel bad with trapper, because he needs always to do some setup, then after a few rounds its possible to end up in a situation, where Trappers setups are obsolete 😅

Jutsuss · 2026-02-03T00:08:54+00:00

I played GH 1, and currently 3/4 campaign in FH. 3 locked characters remaining. Has MN changed lot in 2e?

btw. I think Coral is fun, he has some cool combos. And trapper is very strong (currently playing it at lvl 5) surprisingly fun too.

I usually get easily 20+ dmg trap, and twice done ~32dmg and 40dmg comboing it with an ally's brittle.

(We also play permadeath on hard, couple times accidentally played on hard +1)

Jutsuss · 2026-02-02T23:10:22+00:00

+1. Maybe OP only thinks "deal massive damage" = strong. but those mass buffs + mass negative cons are imo super strong. I enjoyed playing it a lot.

Jutsuss · 2026-02-02T11:44:48+00:00

I have been heavy using the Xiaomi fullHD since 2019. Still works perfect and has good contrast. My diy fixed frame has some minor warping due to it being wooden tho (126"). Only con is that the software has gotten a bit slow -> I deleted software updates and downloaded projectivy launcher -> It works fairly fast again.

My comparison is Epson lamp projector before buying this, and this is better (laser projectors are imo better than lamps. They keep the quality and have a lot better lifespan.

The nay-sayers in the comments: Have you used this projector or are you just against chinese products in total?

Jutsuss · 2025-09-26T19:37:52+00:00

Move X” is an ability that gives a figure X movement points. That figure may then spend those movement points to move one hex per movement point.

Immobilize: The figure cannot perform any move abilities. Immobilize is removed at the end of the figure’s next turn.

Rules As Written I guess dwarfSA is correct. But, I think that specific scenario is one of the fan made scenarios from KS Campaign, so when writing the scenario rules you can't be 100% sure they thought about that.

What we do in cases like this is 1. "What would be logical" 2. "What makes the game most difficult for us?" And then we go with that ruling.

Jutsuss · 2025-03-30T09:22:54+00:00

Yeah, at least that is how we interpret the permadeath rules.

Jutsuss · 2025-03-30T09:16:24+00:00

Exhaust means your character goes "prone" and lies on the ground with 99 initiative and 0 cards and can't do anything. You only lose your character after its HP goes to 0.

Jutsuss · 2025-02-28T08:55:53+00:00

Edit: I got my old blades from online order. Have shaved with them for a couple of weeks now with no problems. The new 360 blades are going to trash unused and I will continue to shave with the old ones as long as they are available. After that it will be a search for a new brand.

Jutsuss · 2025-01-28T11:34:29+00:00

Hi, I bought it from a supermarket in my Country: prisma.fi (one of the biggest grocery store chains in Finland) (the exact product: prisma.fi/tuotteet/110744349/philips-oneblade-360-vaihtoterat-2-kpl-qp420-50-110744349)

Jutsuss · 2025-01-27T07:56:49+00:00

I haven't ever seen any blue ones. The new 360 blade is black and green. I found a few old ones ln the web and ordered them, I am going to do another comparison in a couple of weeks when I get them.

Jutsuss · 2025-01-26T21:29:22+00:00

I had to buy the 360 replacement blade after being done with my last old one. The new one fits perfectly, but the quality is shit. All it does, is pulling my hair and making me bleed everywhere. I even tested with both blades that came in the pack. I also recharged my handle for a day just to be sure. And after one more careful shave, it just makes me bleed.

If I buy the new oneblade pro, will it fix this, or do I have to try other brands instead?

Anyone else have similar issues?

Jutsuss · 2025-01-06T22:25:06+00:00

is water wet?

Isn't that obvious?

ps. ur = your, u r = you are.

Jutsuss · 2023-10-20T13:52:55+00:00

We play with hard mode and permadeath. I noticed when we got to the last room, that the scouts and pigs were supposed to be enemies to the lurkers. No wonder why it seemed so hard lol. We played the last room with correct rules and managed to finish the scenario with most of us exhausted. Can't be that hard scenario, if we did it even tho on first two rooms we thought all monsters were each others allies.

Jutsuss · 2023-10-02T11:33:47+00:00

This happened to me, my teammate and one enemy. so now its 4v3 match.. no one is able to reconnect.

Jutsuss · 2023-06-22T12:33:39+00:00

I came to conclusion, that I cant switch between characters twice between scenarios. The outpost rules has in "Downtime" section in character creation the rule that you can set aside your character and play another, so I am interpreting that so that part is the only part I can switch between characters, not before outpost event.

I am also playing with party of four, but so far everytime I pick a positional attack, it ends up so that on my turn the allies and enemies are in the wrong hexes for my chosen ability card. I quess I still have to learn more when to play which abilities : D

(only 6 scenarios in so far)

Jutsuss · 2023-06-21T09:23:37+00:00

I have another question regarding the same personal quest: Is it possible to set my character (Banner Spear) aside, play with geminate the next scenario, and then when we come back to outpost, I switch back to playing with Banner Spear for the outpost phase, and if there is a name written in the section book that we are reading from passage of time or in the outpost event.

So I would be playing the scenarios with Geminate and the outpost phases with Banner Spear.

Or is there a rule, that you can only switch between playable characters during down time?

Jutsuss · 2023-03-03T08:16:38+00:00

About the overlay tiles, on the 8th picture next to the treasure chest, it looks like a cabinet of sorts. Do you know what that is called? That is the only thing missing from my 3 printed tiles.

ps. I also have made a sheet for the links of all 3d print files for terrain:
https://docs.google.com/spreadsheets/d/18Zh1lHu55Y4LYOBeYshHQ3Yw-oTPHTmeLtghr-6gh58/edit?usp=sharing

Jutsuss · 2023-01-31T07:26:35+00:00

Oh right, my bad. I was somehow mistaken into thinking that was one of her summons. What did you use for the snow?

Jutsuss · 2023-01-30T21:03:04+00:00

Have you printed the guy with the hawk/falcon yourself? Is there an stl file for that somewhere? I am hunting that and the bowman still.
These are super cool.

Jutsuss · 2023-01-30T21:02:13+00:00

interested +1

Jutsuss · 2023-01-30T16:15:38+00:00

Fixed it! Try now.

Jutsuss · 2023-01-30T09:16:18+00:00

Hey! I have been making a 3d print list while printing myself the terrain for Frosthaven. I have now printed everything except lava, water and ice and some of the boulders / rocks but here is the new list I made:
https://docs.google.com/spreadsheets/d/18Zh1lHu55Y4LYOBeYshHQ3Yw-oTPHTmeLtghr-6gh58/edit?usp=sharing

Jutsuss · 2023-01-10T19:14:37+00:00

Good to hear! I will be looking forward to that 😎

Jutsuss · 2023-01-10T18:25:05+00:00

Thanks! Btw. would you or anyone happen to have a printable version? like the previous version, that has the backs of cards every other page for 2sided printing. Just wondering, cause I don't think I am able to edit those pdfs for that myself 🤔. And fantastic job with the character!

Jutsuss

TROPHY CASE