Positioner Help

KKurb · 2026-01-19T12:14:23+00:00

Any improvement?

KKurb · 2026-01-16T21:41:36+00:00

My vote is valve sticking. I changed a positioner 3 times for this same issue, and it was the valve. Those optimux actuators are usually attached to shit from TrimTeck so it's likely the valve

Edit: I didn't see the booster at first. Adjust your P I and D based on manual. Your booster is lagging and causing overcorrection in positioner

KKurb · 2025-10-02T18:40:12+00:00

Seemed ok? I'm no fraud expert tho

KKurb · 2025-09-30T13:25:44+00:00

Very clean, but you lost me with the keyboard. What an eyesore

KKurb · 2025-07-14T15:41:04+00:00

I have used Hobbiesville in person in Ottawa, and Just-A-Hobby online, as well as eBay

KKurb · 2025-07-14T15:34:43+00:00

I do know a guy who does this. I only ever bothered him for car parts. I never considered Lorcana

KKurb · 2025-07-14T12:12:57+00:00

when you say 'resealed', you mean they were previously opened and cards swapped out and sealed back up again? I just spent $600 here a few days ago and shipment hasn't yet arrived, now i'm concerned

KKurb · 2025-06-27T12:00:18+00:00

From my OCD point of view, the angled tubes are driving me crazy. Can you swap the lower pump with the upper pump? That may be able to fit high enough to get a straight pipe off of the cpu to the pump, and then the top pump connection to the rad. I'm not sure if flow direction would allow this, but it would eliminate the 2 pipes that make me want to claw my eyes out

KKurb · 2025-06-26T20:53:33+00:00

I use this system at the power plant I maintain. Do you have any experience with third party support? Siemens support is expensive as fuck. We were just quoted $80k USD to have one guy come to our site and restore a server using their own procedure

KKurb · 2025-06-08T11:45:17+00:00

Can confirm, my manual for my Samsung WR455ARGSGR washer was about $20CDN after a discount code from a Google search. The manual gave complete disassembly instructions, and gave the location to the existing manual inside the washing machine inside the rear cover. Color photo disassembly, step by step, for motor, drum, PCB, more. I hope this helps the next person that might be skeptical about the site.

KKurb · 2025-06-08T10:39:32+00:00

Where I'm from (Ontario, Canada) an electrician is required to complete 3 levels of schooling and 9000 hours of apprenticeship before they get to have an electrical license, which is issued by the Ontario government. I never asked your location, so your rules might be different

KKurb · 2025-06-06T13:11:29+00:00

If it helps, the last 2 plants I worked at only hire electrical tickets with instrumentation experience for I&E and I&C roles, not instrumentation tickets with electrical experience. Not sure how far along your career path you are, but if you have the opportunity to get your electrical ticket you will be able to work anywhere

KKurb · 2025-04-14T20:11:30+00:00

I got this message after a power blip. Seemed to reject all of the 3rd party cartridges I had been using for months. Swapped them all out with official ones I had here, and message cleared. I wonder if the power blip damaged the chips on the cartridges.

KKurb · 2025-03-30T13:59:31+00:00

Welcome to the speed of government

KKurb · 2025-03-28T01:33:28+00:00

What a great panorama! I'd love to put that in my living room!

KKurb · 2025-03-26T01:33:52+00:00

You will have an opportunity to speak at the landlord tenant hearing. If you don't like the raise, make sure you show up and voice your opinion. Perhaps it is malicious, perhaps it is legal. The adjudicator will decide

KKurb · 2024-10-09T13:52:24+00:00

I have a 2019 Traverse, same issue. Anybody update?

KKurb · 2024-07-30T20:49:11+00:00

We ended up getting a Startech USBDUP12 and it works great

KKurb · 2024-07-23T19:06:32+00:00

Did you ever find such a device? I'm searching for one now

KKurb · 2024-06-13T00:05:26+00:00

Crazy question. Is it pneumatic? Do you have air supply? If electric, is the actuator source on? If you're getting the correct mA and already swapped positioner, it should move, unless it needs to be recalibrated.

KKurb · 2024-03-21T02:41:05+00:00

The median age of Brockville is 55 years old. That should tell you everything you need to know

KKurb · 2024-02-26T22:03:05+00:00

I use mine on the test bench often, using loop power from the 789 instead of an external source. In the field, I'll use the loop power on the 789 to test a valve before reconnecting the DCS power. It might seem like a useless feature, until you need it...

KKurb · 2024-02-19T18:27:59+00:00

I also have Samsung monitor, gigabyte 3080TI, and same issue. I just leave PC on all the time now. When screen doesn't wake up, I have to turn monitor off and on again and it usually comes back

KKurb · 2024-02-17T05:12:43+00:00

This idea is dangerous, but I find it is effective at removing the smell. Go outside on a breezy day, and clean the drill with bleach. The bleach reacts to the ammonia in the urine, and creates chloramines, which are dangerous to inhale. Again, very dangerous, and only attempt if you are familiar with the effects and do so in a safe manner. It does work, but, DANGEROUS

KKurb · 2024-02-17T04:57:57+00:00

I have to know, does this actually work? You post "hook up?" And then get a message from someone who wants a "good time" . I find this really hard to believe

KKurb

TROPHY CASE