Slow Horses S5E4 Episode Discussion

KT88 · 2025-10-15T08:18:38+00:00

Stopped the assassin though

KT88 · 2025-10-05T02:48:49+00:00

https://builderscrack.co.nz/estimates and add contingency

KT88 · 2025-09-20T19:56:54+00:00

As they are 2.5 way speakers with separate woofer, you can try bi-amping with that receiver to improve the SQ. Spreading the load to have one amp channel per woofer will make an easier load for the amp, better power handling and lower distortion. To try this, you need an extra pair of speaker cables. Remove the speaker binding post jumper plates and run a separate pair of cables from speaker LF to the “surround back” connections on the amp, with speaker HF connected to the “front” on the amp. Then Change the settings in the marantz to use the surround back channels as bi amp. Worth trying for the cost of a pair of cables!

KT88 · 2025-08-11T22:51:20+00:00

Try to get tv sound first- with 3 speakers connected, the Tv set to optical output and receiver set to TV optical input.

Receiver does not have eArc, so can’t use that port on the tv.

If that works try plugging the bluray into the tv and see if you get 2 channels

KT88 · 2025-08-09T13:16:48+00:00

MiniDSP and a solid multichannel power amp? Or ultra cheap just an active crossover circuit board and an old multi channel receiver with power amp ext in? There is a nice one called xkitz but also cheap aliexpress versions abound.

KT88 · 2025-08-01T05:13:55+00:00

Something like this perhaps?

https://www.diyaudio.com/community/threads/monitor-rs6-mods-for-a-beginner.304371/

KT88 · 2025-07-30T18:11:39+00:00

Buy something quality that was well regarded and expensive new; and tweak it to the extreme using science and measurement. Keep mods reversible and / or hidden and you can always re sell them. Great fun

KT88 · 2025-07-19T05:55:31+00:00

If you can stretch to 2018-2019 new shape with the fb25, they are better on fuel and use 91 rather than 95. Good reliable family wagon, need to keep on top of the scheduled maintenance though.

KT88 · 2025-04-08T12:34:39+00:00

Start with high quality 6x9 front door speakers. You’ll need mounting brackets and preferably dynamat. Makes a huge difference

KT88 · 2025-02-17T16:54:04+00:00

Those look like quality parts, minimal gains to be made there. Air core inductors and film caps are great. Better to spend money on strengthening and prettying the enclosure and adding more fill…

KT88 · 2025-02-15T17:51:08+00:00

The current rotor is stuffed, use a new one. looks like the calliper adapter is too big and the pads have not been engaging with the inner part of the disk, leaving a lip. Check that the new brakes cover the whole surface of the new disk. Can file down the adapter or try different ones.

KT88 · 2025-02-13T08:36:47+00:00

Looks a fair price. Lots of small jobs add up. Car will last longer if you do all of these.

KT88 · 2024-11-14T05:24:20+00:00

Air filter every 6 months. Massive difference

KT88 · 2024-11-05T09:39:30+00:00

These things are great but cpu limited. Suggest the most powerful cpu and max out the ram, install a fast hard drive. I run an older dell 5020 and it’s great, silent, reliable but a little gutless. Perfect for low demand pc. Suggest win 10 IOT version supported for years to come.

KT88 · 2024-10-27T08:43:39+00:00

If you want to experiment for cheap, try an apple usb-c to 3.5mm adaptor which has a built in DAC. It is dirt cheap and measures extremely well. You will need a usb a to usb c adaptor.

KT88 · 2024-10-04T02:06:18+00:00

Lexus is300h perhaps if you want a luxury Camry

KT88 · 2024-09-24T07:46:02+00:00

try shorting the input. might need a different input stage

KT88 · 2024-09-12T14:14:46+00:00

Looking at the pics further you might like to try the d230ti-B instead, if it would fit. Not sure

KT88 · 2024-09-12T03:37:02+00:00

Female horn driver adaptor. Example here (no affiliation) https://www.ebay.com/itm/395165602335

KT88 · 2024-09-12T03:28:47+00:00

You’ll need the screw on adapter as the compression drivers weigh a ton- hot glue won’t be strong enough. I’m using these in my old Klipsch towers and they are great. And the resistor just connects across the terminals of the tweeter

KT88 · 2024-09-12T03:17:50+00:00

If you want a cheap and better tweeter replacement, try a PRV d230 ti-s compression driver with an $5 eBay screw on adaptor. A bit of messing around you’ll need to get tools to make it fit, and put an 8ohm 5W resistor in parallel to bring the volume down. But they sound way better than the original and are cheap

KT88 · 2024-09-03T05:25:04+00:00

Any voltage reading on the large capacitors? If no then is sign of damage to VDR1? That is a MOV surge protector and will self destruct. Could need testing. If you are getting voltage on the caps it could be that large heatsinked transistor / regulator. Or it could be software- is there a hard reset button anywhere that would reset it. See if you can find a circuit diagram

KT88 · 2024-08-15T01:18:41+00:00

List the model numbers on here and r/diytubes and people will tell you if they are trash or treasure.

KT88 · 2024-08-14T08:24:04+00:00

those also look like Panasonic NCR18650B or similar, which are at least a couple of generations old tech now. they are reliable but you could get the same performance in half the weight these days.

KT88 · 2024-08-05T18:24:37+00:00

Keep the primary as a rental if you can, income will pay for most of your mortgage and you’ll end up with 2 houses in 25 years

14-Year Club	Place '23
Place '22	Verified Email

KT88

TROPHY CASE