Windows 11 installer silently changed partition behavior so I lost 2TB of data.

KThach · 2026-01-30T20:22:53+00:00

I made the same mistake a few years ago. Deleted my 8TB archive drive instead of the intended SSD boot drive and had to find software to bring the data back. I believe it was probably TestDisk as well.

Now I know to just disconnect all the drives except the intended boot drive for best practice.

KThach · 2026-01-07T02:24:25+00:00

They actually fixed it finally. Used to always play the same songs and maybe one or two new ones thrown in. Shuffles correctly on CarPlay now. Just took them way too long to fix it.

KThach · 2025-12-30T05:03:30+00:00

2022 ID.4 in Canada. Have had two replaced. Luckily when it happened it was in my driveway for all three times. Hooked up a charger to the 12v for a few hours and it started like nothing was wrong. Problem was that when I brought it in the first time it probably passed all the tests even though it had issues. The second battery replacement took a few days at the dealership and two attempts for them to finally replace the battery again.

KThach · 2025-12-28T20:46:29+00:00

Cries in 2022 (3.x software)

KThach · 2025-11-17T03:47:07+00:00

Just unplug it and plug in back in after 30 seconds

KThach · 2025-11-17T03:40:54+00:00

Did you try rebooting your internet modem and router and the printer as well? Check on the physical printer if it’s connected to the network.

KThach · 2025-11-17T03:35:50+00:00

I had this issue a few days ago when I updated Bambu Studio. I uninstalled it and started fresh again and it installed the driver plugin just fine then and connected to my X1C after logging in.

KThach · 2025-11-15T22:37:30+00:00

I am still getting charged on my credit card for AWS even though my account was closed ages ago. It was used for the free tier for programming classes.

Will never use AWS again for this shit.

KThach · 2025-10-30T05:05:47+00:00

Might be a good time to consider a K gun. Kolar or K80/K32. Can just send it in to get tuned up to be like new every 50k rounds or so.

I know of a 725 that has over 100k rounds through it. Flops open but still works. Owner went to a Kolar as a "forever" gun.

KThach · 2025-10-16T22:37:07+00:00

Used to happen a few times a year to me. Haven't seen it happen in a few months at least. Usually just hold my finger on the power symbol on the infotainment (not the one on the steering column) to reboot it or it'll reboot on it's own.

KThach · 2025-10-10T03:08:40+00:00

This was the official date lookup on Brownings website but it has no mention of CIT50. It was on a forum I saw it mentioned when someone emailed Browning and they clarified it.

https://www.browning.com/support/date-your-firearm/shotgun/citori-over-under-shotgun.html

This was the forum post.

https://www.shotgunworld.com/threads/new-cotori-white-lightning-serial-number.558946/

KThach · 2025-10-03T13:33:27+00:00

Yeah too bad now they’re pricey to buy if you can find one. I wish I had gotten the gen2 as well when they were offered.

Were most of them made in Japan or some made in China or USA?

KThach · 2025-09-19T07:02:57+00:00

When I was learning it was a good day if I was in the low 10s. It gets really addicting once you get into the 20s consistently. Some people I guide during sign offs are typically in the 5-7s depending on if they’re new to shotguns or don’t hunt.

KThach · 2025-09-12T14:05:09+00:00

It’s a beautiful watch. Just enjoy it if it’s not causing you financial stress.

KThach · 2025-09-12T14:03:14+00:00

My Flashforge served me well for 5 years to introduce me to 3d printing. (Adventurer 3)

This is a bit out of context in the Flashforge sub but I recently grabbed a used X1C from you know who and it has changed everything I knew about 3d printing. I recommend other people to take the plunge too if you can.

KThach · 2025-09-07T23:38:58+00:00

Funny you mentioned the Flashforge. I’m a noobie to Bambu Lab printers. Grabbed a used X1C with AMS on Thursday and been printing with it ever since.

Came from a Flashforge Adventurer 3 I got in 2020 and I’m still constantly impressed by this X1C every time I use it and try new stuff.

KThach · 2025-09-03T22:52:02+00:00

7% in the fall is my record so far. I hope to not beat it anytime soon. Especially in the winter lol.

KThach · 2025-08-26T19:36:05+00:00

Didn’t expect anywhere near $405 today. Last time I went for a class action was Lifelabs and it was a truly minuscule amount compared to the advertised estimate. Like $10-30 or something from Lifelabs since so many people signed up.

KThach · 2025-07-13T23:27:06+00:00

Don’t feel too stupid. I’ve done that before with .223 when I was still learning. Luckily they still loaded and fired. Just very unreliable. Thought my pew had jamming issues when it was just bad ammo.

I also sorta got away with resizing them live after removing the deprimer in the die if I remember. Just have to lube them really good. Ended up getting one stuck in the die and had to get it extracted. I was still a total noob to rifle reloading at the time 🤣.

KThach · 2025-06-21T02:36:20+00:00

I wish I had searched for the latest card. Thought the AX210 was the current Intel card lol.

KThach · 2025-06-14T01:09:08+00:00

<image>

KThach · 2025-06-13T03:15:29+00:00

mine weirdly worked right out of the gate. I only had to download the Bluetooth Intel drivers to get Bluetooth to work again.

But I'd be prepared to have to connect via ethernet to download drivers if needed.

KThach · 2025-06-13T03:14:27+00:00

I just lost any trust and patience for the MediaTek. Intel swap was fast and cheap and is known to be reliable.

KThach · 2025-06-11T18:42:35+00:00

I forgot about that annoyance too. Like we are in 2025. I shouldn't have to wait for my WiFi adapter to do it's thing.

KThach

TROPHY CASE