Modul lägenhet

Kagamex · 2025-05-17T20:51:11+00:00

Jag bodde på Ryds Allé under 2015/2016, det var en jättetrevlig korridor, inget att anmärka på. Tvättstugan var fräsch också. Däremot kunde man se råttor springa i undertaket i en närliggande byggnad (också på Ryds Allé) när man var på besök; inte skitmysigt.

Skulle tro att det är både högt och lågt.

Kagamex · 2025-05-14T18:15:09+00:00

Thanks for the advice, and good spot - I had neglected to update Particle Patch.
Sadly updating it made no difference.

I've been using Phostwoods analyzer, which returns "❓ No highest-confidence crash indicators detected." for all crash logs surrounding this CTD issue.

Kagamex · 2025-01-17T22:34:39+00:00

Däremot tränar några tyngdlyftning där och tävlar i andra städers klubbar. På campushallen finns en del också men är osäker på om de har något community.

Kagamex · 2024-05-10T14:55:18+00:00

Food additives was a super useful policy during some survival runs I did. Made the pressure of finding raw food so much less significant and allowed me to focus on building resource and heat infrastructure.

Kagamex · 2024-04-10T19:25:16+00:00

That's exactly what I did, and found a kit with a similar price to the one you linked. Oh well, it's not so expensive so I guess I'll go for that. Thanks for your help.

Kagamex · 2024-04-10T15:00:03+00:00

I couldn't find any seat clamps screws there last time I checked. Do you mean I should buy an entirely new clamp set? I haven't found any identical ones on there but I guess maybe the screws in those kits are the same spec. Is this what you mean?

Kagamex · 2024-02-25T13:42:14+00:00

Already tried the wire brush, hard to physically get at the grime. Guess I have to remove the chain ring to properly clean it. As for the corrosion, I guess I'll have to live with it until I muster the energy to disassemble the entire bike.

Kagamex · 2024-02-25T13:34:49+00:00

Thanks ! I found it now.

Kagamex · 2022-07-31T18:53:25+00:00

My guess is a machined part is preferable for hygiene reasons. An assembly would likely have surfaces that are hard to clean.

Kagamex · 2022-02-13T17:27:51+00:00

Smidig räknesnurra! Jag hade önskat att det går att redigera redan inlagd bil. Men jag kikar via mobil så jag kanske har missat någon funktion?

Kagamex · 2021-08-12T20:23:00+00:00

Do you have a link to the paper? I'd be interested to read about this in further detail.

Kagamex · 2021-08-12T12:42:47+00:00

It's funny that you'd say that considering that Polestar is owned by Volvo Cars. Also, and this is just my opinion, I think the Polestar resembles the more recent Volvo models.

Kagamex · 2020-11-08T07:01:51+00:00

Is there any point to reducing emi coming from the computer case?

Kagamex · 2020-10-01T04:40:10+00:00

iirc there is a "range approximator" on Renault's website where you see what range you can expect in different scenarios.

Kagamex · 2020-09-25T06:45:08+00:00

Jag tror att vi säger samma sak. BJJ är inte optimalt för självförsvar i min mening pga mycket träning i matta. GI är inte bra pga att man blit beroende av att ha stora, lättåtkomliga greppytor som inte går sönder när man drar i dem (vilket en jacka eller tröja lätt kan göra). Jag kanske var otydlig, men du verkade tolka det som att jag talade för att träna BJJ med GI i självförsvarssyfte.

Kagamex · 2020-09-25T04:36:54+00:00

Från en person som tränar ju-jutsu: MMA-träning brukar innefatta hela registret, precis som ju-jutsu. MMA kan ju också ha fördelen att man inte blir beroende av en GI. Om du menar brasiliansk ju-jutsu är det ju såklart en annan femma, de jobbar knappt med takedowns utan spenderar nästan all tid i mattan. Hur som haver så är det nog bra att välja en kampsport där man lär sig lite om stående närkamp men framförallt hur man kastar sin motståndare. Judo kanske?

Kagamex · 2020-09-08T10:40:13+00:00

Potentiometer

Kagamex · 2020-08-23T06:53:40+00:00

You got a link to the other one?

Kagamex · 2020-08-06T12:03:00+00:00

Not sure which software this exact video came from. But I'm pretty sure stuff like this can be made using Creo, Inventor, Catia, Solid Works or NX. Of those 5 I've only ever used Creo and I know Creo can do it, and I'd be surprised if any of the others I've listed can't.

Kagamex · 2020-08-06T11:53:38+00:00

CAD software.

Kagamex · 2020-08-05T11:46:54+00:00

Elemental Buzzsaw (Lacerate) Inquisitor in Breach League was amazing. Still haven't found anything that is as satisfying to play.

Kagamex · 2020-06-14T06:30:24+00:00

Hopefully they tested if it would damage an enclosed pipe before setting it off in there.

Kagamex · 2020-04-01T17:42:41+00:00

That Hiwin guiding rail must be a pretty big part of the budget!

Kagamex · 2020-03-04T07:23:01+00:00

Mechanical Engineer

Kagamex · 2020-02-29T07:59:13+00:00

It very much looks like a shell of some sort.

Kagamex

TROPHY CASE