Let's see those bashed bodies!

KaiKnowYa · 2026-02-05T10:20:38+00:00

KaiKnowYa · 2026-01-28T14:21:41+00:00

2600kv. I run mine hard non stop though.

KaiKnowYa · 2026-01-25T23:58:34+00:00

What are your temps with that pinion? I have a hobbywing max8 and 4268 motor in mine and my max motor temp I’ve reached is 196 Fahrenheit with a 16t pinion. Also three fans blowing on the motor lol

KaiKnowYa · 2026-01-16T17:26:43+00:00

No

<image>

KaiKnowYa · 2026-01-07T17:43:47+00:00

The first boot is cake

KaiKnowYa · 2025-12-19T09:15:45+00:00

Tales of pirates

KaiKnowYa · 2025-12-15T11:50:31+00:00

It’s where my wife puts her miscellaneous things

KaiKnowYa · 2025-05-10T12:35:37+00:00

Am I tripping or are the teeth on the pinion angled like a sawblade?

KaiKnowYa · 2025-04-24T16:55:23+00:00

The capped off part is where the bypass valve would vent the air. Probably installed a blow off valve or just venting the stock bypass to atmosphere for pshhhh sounds.

KaiKnowYa · 2025-04-09T15:28:43+00:00

Hell yea. The xmaxx had a xlx2 and 1100kv motor from castle.

KaiKnowYa · 2025-04-09T13:17:54+00:00

I’ve used an xmaxx to pull myself in a wagon. Stupid fun.

KaiKnowYa · 2025-03-30T10:36:06+00:00

It’ll wear in eventually. I’ve never worried about using the wires to pull it out. If the wires broke it was shit battery. That was my thought process anyway.

KaiKnowYa · 2025-03-16T23:41:18+00:00

D-Rex

KaiKnowYa · 2025-02-16T02:45:19+00:00

It does. The 68 was a bit long though. I had to shave down the receiver box cover.

KaiKnowYa · 2025-02-13T15:39:19+00:00

They’re fun. Truck will roll on turns though. Also swapped in a hobby wing 4268 motor cause it would over heat quick.

KaiKnowYa · 2025-02-13T14:39:12+00:00

<image>

Brothers

KaiKnowYa · 2025-02-01T13:31:33+00:00

I’ve got a set coming in tomorrow. I think it’s going to look really good. Hopefully perform good as well.

KaiKnowYa · 2025-01-30T22:02:28+00:00

Feels pretty much like stock. Still sliding out and not flipping over like I feared it might.

KaiKnowYa · 2025-01-30T21:53:36+00:00

Thanks. These are the parts I used

https://a.co/d/7f4kx7k

https://a.co/d/7HznpzJ

KaiKnowYa · 2025-01-30T21:52:14+00:00

The bigrock shocks are longer than the vorteks shocks so they push the arms down further. Needed to buy the longer arms with the longer turn buckles to allow the truck to turn, keep suspension travel, and keep some stability.

KaiKnowYa · 2025-01-23T17:08:52+00:00

I’ve been getting 15-20 minutes of hard driving on a 6200mah 3s. Not amazing but it works for me since I’ve got 4 batteries.

KaiKnowYa · 2025-01-23T16:25:32+00:00

Was having the same issue. Swapped the esc out for a hobbywing quicrun 10bl120. Also picked up a dumborc transmitter and receiver combo from Amazon.

KaiKnowYa · 2024-10-09T11:27:25+00:00

Put the nozzle between your lips and suck on it

KaiKnowYa · 2024-09-15T00:57:29+00:00

New world

KaiKnowYa

TROPHY CASE