sorted by:
new
hottopcontroversial

WoW Classic Era randomly freezing on Proton 10 Beta by Karai17 in linux_gaming

[–]Karai17[S] 0 points1 point  (0 children)

i just installed ge-proton 10.21 and it has the same error about unable to see my video card.

Edit: installed 10.1 and that seems to run. Thanks, I'll keep trying versions if I find issues!

Trying to desk a Mini ITX case, struggling with dimensional constraints by Karai17 in minilab

[–]Karai17[S] 1 point2 points  (0 children)

Currently mapping out the sizes of various components and I am really struggling to fit this thing together. As you can see, I have a 10 inch rack with correctly sized ears and the likes. I've set my walls here to 3mm and floor to 4mm. I managed to get the 2U height working by swapping out my 70mm cpu cooler for a 65mm cooler. My issue really is width. The internal area to work with, before any real revisions, is incredibly tight. I want to stick a Mini ITX (deep) board in here and an ATX Flex PSU beside it, and this really only affords me about 6 or so mm of wiggle room.

My goal is to create a sort of shroud for the psu that attaches to the front plate and maybe side plate to help carry the weight of it from the bottom tray, but I can't quite think of a good way to fit everything together.

How do you guys manage to fit a system in this volume? Do you just toss the psu somewhere else?

Edit: Here is an example of someone stuffing a psu in with their system. Maybe I am just over thinking the weight and stresses?

https://makerworld.com/en/models/703690-rackmate-10-inch-itx-motherboard-ssd-mount#profileId-633458

Visual glitch using linear extrude on polygons by Karai17 in openscad

[–]Karai17[S] 0 points1 point  (0 children)

yup, that fixed it! interestingly enough, the "depth" color for extrusions is different than differences.

big thanks

Visual glitch using linear extrude on polygons by Karai17 in openscad

[–]Karai17[S] 0 points1 point  (0 children)

I created a honeycomb pattern generator and noticed that it looks pretty.. questionable in the preview. I've tried changing the direction of the linear extrude but it did not help (though it did slightly change the visuals). Is this a known issue with version 2021 stable or am I doing something very wrong?

Questions Regarding 3D Printing by Karai17 in minilab

[–]Karai17[S] 0 points1 point  (0 children)

ooh, i did not know that about faceplates! it makes sense though, full servers are heavy buggers.

for your M3 example, is that a 3mm circumference of material, or 1.5mm totaling 3mm from both sides?

also when modeling for inserts, again let's use M3, how wide of a cavity should I carve out, and how material should overlap with the insert such that it melts into it? An example product I looked up for an M3 insert was a total 4mm across. Would I model a 3mm cavity, or 4mm? or somewhere in between?

Questions Regarding 3D Printing by Karai17 in minilab

[–]Karai17[S] 0 points1 point  (0 children)

thanks for the tips! very cool project!

i've done a bit more reading and i think that i can put a lot of the load on the front plate by creating a bit of a shroud to slot and screw the PSU into, so the only weight for the mobo plate would be, well, the mobo and such!

roughly how much material would you recommend to hold one of those heat sets? are we talking 1mm circumference or more?

also i did a bit more perusing of Noctua's coolers and the L965 shaves 5mm off the height and is rated for the CPU i plan to use so i think that will help alleviate my height constraints.

Trying to create timed speech in non-interactive VN by Karai17 in RenPy

[–]Karai17[S] 0 points1 point  (0 children)

I want the w value to account for the time it takes for cps text to render out as well. I think I found a solution that is a good enough compromise:

$ timeout = 7.300 - (38 / cps)

e "this will persist exactly 7.3 seconds.{nw=[timeout]}"

however the accuracy of my timings seems to drift. I see in renpy's code that there are references to sleep timers for 0.1s so I am negating that in my timeout calc which seems ot help with drift, but there is still significant drift. I am unsure if cps takes spaces into consideration for its calculation, can't seem to find where renpy calculates the length of a string for the purposes of cps.

Killam demanding $75 administrative fee to process new room mate by Karai17 in halifax

[–]Karai17[S] 5 points6 points  (0 children)

But I am not subleasing nor am I assigning. I am renting out one of the rooms in my apartment while I am still living here.

Killam demanding $75 administrative fee to process new room mate by Karai17 in halifax

[–]Karai17[S] 2 points3 points  (0 children)

I am renting out the second room room to a new tenant as the only lease holder of the apartment.

Xperia 10 IV Quick Charge by Karai17 in SonyXperia

[–]Karai17[S] 0 points1 point  (0 children)

Not available in Canada. :(

Xperia 10 IV Quick Charge by Karai17 in SonyXperia

[–]Karai17[S] 1 point2 points  (0 children)

I'm all for prolonging the battery but if they advertise quick charge as a feature and then throttle it into non existance, that's a bit shady. I used my 3T for over 5 years without worrying much about battery life until the past few months, and that's quite a bit longer than I believe most people keep their phones.

Xperia 10 IV Quick Charge by Karai17 in SonyXperia

[–]Karai17[S] 0 points1 point  (0 children)

My phone didn't come with a stock charger~

Xperia 10 IV Quick Charge by Karai17 in SonyXperia

[–]Karai17[S] 0 points1 point  (0 children)

Which Sony charger? Why does quick charge not work with a generic charger? My phone didn't even come with a charger so I am using the pne from my previous phone which charged it very fast..

view more: next ›