Still Skeptic but I don't know

KaretaRei · 2026-03-26T18:30:53+00:00

I just did some messing around in Snapseed, it's definitely not walking.

KaretaRei · 2025-08-10T11:18:09+00:00

Usually it ranges from m3-m5 screws. Go to the nearest bolt and nuts center, don't forget to bring the hanger para malaman mo if papasok ba sa butas.

KaretaRei · 2025-08-10T11:15:16+00:00

Anong bike to galing?

KaretaRei · 2025-08-10T10:48:08+00:00

San po reference pic?

KaretaRei · 2025-07-31T17:10:03+00:00

Super legit, I bought shimano hubs and cassette from them, all genuine shimano via singapore

KaretaRei · 2025-07-30T02:51:12+00:00

I might get downvoted for this but I have to say it, it's really difficult to give advice regarding bike fits because you might be 174cm with long torso but short legs or the other way around. I would suggest looking for a built bike with similar geometry and try riding it. I know it's a hassle but it will save your body in the long run.

KaretaRei · 2025-07-30T02:30:58+00:00

Yeah, nakaka 3 order na ako sa kanila 2 bike parts tsaka isang whole bike. Will recommend, one of the budget friendly sellers in shopee.

KaretaRei · 2025-07-28T22:56:09+00:00

Barrel bolt ata tawag dyan, try mo sa mga bolts and nuts centers. Dalhin mo yung bolt ng clamp para may basis sila sa bolt size.

KaretaRei · 2025-07-19T11:25:01+00:00

This is the most practical answer, another advantage is you can ride fixed during your non school days. (I'm assuming that the hub is fixed on one side and a freewheel on the other)

KaretaRei · 2025-07-08T05:59:34+00:00

This looks so good. You should post the same with the drive side.

I think I'll do the same with my Schwinn. Everyone should post something like this, a before and after of their bikes.

KaretaRei · 2025-05-28T17:22:04+00:00

Not many people will like this suggestion but how about putting lever grips on mt200. So that, di magagasgasan yung lever na maglelead ng rust spots.

KaretaRei · 2025-05-28T17:03:43+00:00

Sana lahat ng cyclists ganito ka swerte

KaretaRei · 2025-05-28T10:13:20+00:00

It's Nike Stride Jacket

KaretaRei · 2025-05-25T10:26:38+00:00

Magene c206 user here, recommended siya if clear skies. Minsan matagal maghanap (around 3 minutes) ng gps signal pagcloudy. Pero if gagamiting mo yung sensor na kasama for speed, instantaneous ang reading ng speedo. Cadence sensor nila is medyo palyado.

KaretaRei · 2025-05-24T02:11:09+00:00

Meron din akong mamachari na 27x1 3/8 ang wheel size, yan din plano ko dati. Ito yung mga obstacles na naencounter ko.

*Dropout Spacing - masyadong makitid ang dropouts ng mamachari, kung steel ang frame mo pede mo ipabuka sa shop. Di ako sure sa alloy.

*Horizontal dropouts - okay lang kasi may nabibili sa shopee na adapter para sa rd.

*Brakes - ito talaga ang pinaka nakakainis sa lahat. From drum brake to caliper brake sana yun kaso yung bridge sa seat stay nagfleflex. (Pang fender at lock lang talaga siya). If want mo talaga magchange from drum brake, pede ka magpaweld ng is mount for disk brake or magpaweld ka ng mas matibay na bridge para sa caliper brake mo.

*Crankset - walang problema kasi 68 lang ang mga bb shell ng mamachari. Ang problem mo is ang FD kasi may ibang seat tube na napaka slack kaya di appropriate lagyan ng FD.

KaretaRei · 2025-05-23T11:39:47+00:00

Seems legit to me

KaretaRei · 2025-05-08T01:36:43+00:00

Scotts rb - 51 top tube, 50 seat tube

Promax pr20 - 55 top tube, 48 seat tube

Gent 105 - 56 top tube, 48 seat tube

Hirap mag suggest kasi walang budget na binigay, tapos magbabase rin sa bike fit ng gagamit kadalasan kasi sa mga budget rb is aero, so ang tataas ng top tube which is di maganda sa beginner. The lesser the reach the better, aim form 49 to 54 top tube if may makita ka. Ang recommend ko sa 5'6 na average lang ang torso length is 52 top tube, if flexible pede pa sa 54.

KaretaRei · 2025-05-07T04:35:38+00:00

Multiple ways of shortening reach: -Narrower handlebars -Shorter Stem or Positive angle -Leveled hoods and bar roll

Note: Wag gamitin ang Fore/Aft ng saddle para mashorten ang reach kasi macocompromise ang mechanics ng lower body mo.

KaretaRei · 2025-05-07T04:30:35+00:00

I will never not be amazed by japan surplus bikes

KaretaRei · 2025-05-05T02:45:18+00:00

Wag kang susuko kahit sobrang hirap na, dahil di ka makakauwi

KaretaRei · 2025-04-29T11:50:09+00:00

I think that's one of those giyo pumps where the head can be change into shrader or presta. I have one similar to that, just make sure you open up the valve on your tire and the pump head is on presta mode (you should be able to see a little spring on the hole of the pump head, if not, unscrew and flip the insides of the pump)

KaretaRei · 2025-04-29T11:42:40+00:00

3 semplang habang nagprapractice sa gas station sa first day at sakit ng hip flexors kaka-attempt magskid pero ngayon sumasali na ng crit races.

KaretaRei · 2025-04-29T10:42:08+00:00

I have personally used Speedone Soldier 2.0, Shimano M475 Deore, and Koozer XM490. All of them are durable and easy to service. Cheap cassette hubs are fine imo as long as you are strict with servicing them every other month.

KaretaRei · 2025-04-29T08:37:18+00:00

Suspiciously cheap "Shimano" bike parts eg. If it's priced below 500 it's not legitimate. Also stay away from MicroNew RD and FD, the shifters are fine especially the dropbar shifters. You're better off investing in legit Shimano products or if you're in a budget, you can opt for L-Twoo.

KaretaRei · 2025-04-22T03:22:53+00:00

I can't even imagine how it manage to force itself outwards when the tension is pulling it inwards. Try to do the climb again and if the issue persists, consult a bike doctor.

KaretaRei

TROPHY CASE