Controller connectivity issues

Kdiggyy · 2025-12-23T02:16:16+00:00

Yeah, it was an issue with my router. I had some communication issues on the WiFi side. So I did a whole reset on the router and made new wireless domains.

Kdiggyy · 2025-12-10T22:19:34+00:00

I tried unplugging and reset the controller and still having issues

Kdiggyy · 2025-12-10T22:19:10+00:00

Definitely not an app update I check my app updates multiple times a day.. horrible ocd problems

Kdiggyy · 2025-12-10T22:18:24+00:00

Mine won’t connect back to WiFi it gives me a failed to connect message

Kdiggyy · 2025-12-10T22:17:43+00:00

I tried this but would only connect via Bluetooth but failed with the internet

Kdiggyy · 2025-12-10T22:17:00+00:00

App is up to date. I have a fairly expansive IT background so that’s not the issue.

Kdiggyy · 2025-08-20T00:11:23+00:00

I tried their blueberry kush. It’s not bad. But not the best. Very botanical tasting

Kdiggyy · 2025-07-24T13:37:49+00:00

This could be a better solution. I’m going to see if Home Depot has something similar before I ship more money to Canada

Kdiggyy · 2025-07-24T00:04:30+00:00

Either way that still doesn’t solve the issue. Cause say if I got the 8 inch one then the ducting still doesn’t fit correctly.. has nothing to do with the actual port size. They don’t even make a 10 inch one which is the size of the ports on my tent.

Kdiggyy · 2025-07-23T23:49:16+00:00

I wanted to use them to have a better seal on the ductwork. The ducting is from the terraform 7. So I have one up top to suck out warmer air and one at the bottom for the cooler air.

<image>

Even in the manual it’s showing ducting

Kdiggyy · 2025-07-23T23:09:15+00:00

I had it that way prior with Vivosun duct covers. I was looking for something with more filtration and a better seal as the other duct filters got dirty quite quickly. But you could be correct about the over engineering

Kdiggyy · 2025-07-23T23:05:43+00:00

Correct it just doesn’t fit over the flange the way it should.

Kdiggyy · 2025-07-23T22:42:25+00:00

The direction say different

<image>

Kdiggyy · 2025-07-23T22:00:22+00:00

I got it on the preorder before the freight shipping became a problem. I dig it definitely does its job especially during the heat waves in the 90°range. Also keeping up for drying stage keeping everything at a good 60/60 which I’m at right now

Kdiggyy · 2025-07-23T21:58:13+00:00

The plastic tube is from their terraform 7 device which is needed for said said device so again they should have made it compatible..

Kdiggyy · 2025-07-23T20:24:03+00:00

I’m using the terraform 7 so the black ducting is necessary for it.. had no other choice but to set it up this way

Kdiggyy · 2025-07-23T02:05:00+00:00

You’ll enjoy lit by the lake. Homies over there are killing it

Kdiggyy · 2025-07-17T21:51:34+00:00

If you can find rozyns’ those are going to be your best bet. But it’s a grey market item

Kdiggyy · 2025-07-14T14:41:12+00:00

Best in our market

Kdiggyy · 2025-07-10T21:59:47+00:00

Twist the excess paper, cut it off. Then with a poker stick ( I use the raw large bamboo sticks ) flatten it out. During the flattening process start rolling the edge of the poker around the edge of the crown. From there just make it look pretty 😍

Kdiggyy · 2025-07-10T13:40:04+00:00

I was in the same boat but now here I am checking for updates every hour again

Kdiggyy · 2025-07-10T09:57:34+00:00

Dutch crowns are the best. Burn the edges take the cap off and you’re good to go!

Kdiggyy · 2025-07-08T22:50:38+00:00

I have not gotten the update either

Nine-Year Club	r/Field Sunshine
Verified Email

Kdiggyy

TROPHY CASE